1: # ZFS on NetBSD
3: This page attempts to do two things: provide enough orientation and
4: pointers to standard ZFS documentation for NetBSD users who are new to
5: ZFS, and to describe NetBSD-specific ZFS information. It is
6: emphatically not a tutorial or an introduction to ZFS.
8: Many things are marked with \todo because they need a better
9: explanation, and some have question marks
11: # Documentation Pointers
13: See the man pages for zfs(8) and zpool(8).
15: - [OpenZFS Documentation](https://openzfs.github.io/openzfs-docs/)
16: - [OpenZFS admin docs index page](https://github.com/openzfs/zfs/wiki/Admin-Documentation)
17: - [FreeBSD Handbook ZFS Chapter](https://www.freebsd.org/doc/handbook/zfs.html)
18: - [Oracle ZFS Administration Manual](https://docs.oracle.com/cd/E26505_01/html/E37384/index.html)
19: - [Wikipedia](https://en.wikipedia.org/wiki/ZFS)
21: # Status of ZFS in NetBSD
23: ## NetBSD 8
25: NetBSD 8 has an old version of ZFS, and it is not recommended for use
26: at all. There is no evidence that anyone is interested in helping
27: with ZFS on 8. Those wishing to use ZFS on NetBSD 8 should therefore
28: update to NetBSD 9.
30: ## NetBSD 9
32: NetBSD-9 has ZFS that is considered to work well. There have been
33: fixes since 9.0_RELEASE. As always, people running NetBSD 9 are
34: likely best served by the most recent version of the netbsd-9 stable
35: branch. As of 2021-02, ZFS in the NetBSD 9.1 release is very close to
38: ## NetBSD-current
40: NetBSD-current (as of 2021-02) has similar ZFS code to 9.
42: There is initial support for [[ZFS root|wiki/RootOnZFS]], via booting from
43: ffs and pivoting.
45: ## NetBSD/xen special issues
47: In NetBSD-9, MAXPHYS is 64KB in most places, but because of xbd(4) it
48: is set to 32KB for XEN kernels. Thus the standard zfs kernel modules
49: do not work under xen. In NetBSD-current, xbd(4) supports 64 KB
50: MAXPHYS and this is no longer an issue.
52: Xen and zfs on current are reported to work well together, as of 2021-02.
54: ## Architectures
56: Most people seem to be using amd64.
58: To build zfs, one puts MKZFS=yes in mk.conf. This is default on amd64
59: and aarch64 on netbsd-9. In current, it is also default on sparc64.
61: More or less, zfs can be enabled on an architecture when it is known
62: to build and run reliably. (Of course, users are welcome to build it
63: and report.)
65: # Quick Start
67: See the [FreeBSD Quickstart
68: Guide](https://www.freebsd.org/doc/handbook/zfs-quickstart.html); only
69: the first item is NetBSD specific.
71: - Put zfs=YES in rc.conf.
73: - Create a pool as "zpool create pool1 /dev/dk0".
75: - df and see /pool1
77: - Create a filesystem mounted on /n0 as "zfs create -o
78: mountpoint=/n0 pool1/n0".
80: - Go back and read the documentation and start over.
82: # NetBSD-specific information
84: ## rc.conf
86: The main configuration is to put zfs=YES in rc.conf, so that the rc.d
87: scripts bring up ZFS and mount ZFS file systems.
89: ## pool locations
91: One can add disks or parts of disks into pools. Methods of specifying
92: areas to be included include:
94: - entire disks (e.g., /dev/wd0d on amd64, or /dev/wd0 which has the same major/minor)
95: - disklabel partitions (e.g., /dev/sd0e)
96: - wedges (e.g., /dev/dk0)
98: ## mount order
100: NetBSD 9 mounts other file systems and then ZFS file systems. This can
101: be a problem if /usr/pkgsrc is on ZFS and /usr/pkgsrc/distfiles is on
102: NFS. A workaround is to use noauto and do the mounts in
105: NetBSD current after 20200301 mounts ZFS first. The same issues and
106: workarounds apply in different circumstances.
108: ## NFS
110: zfs filesystems are reported to be exportable over NFS.
112: The "zfs share" command adds a line to /etc/zfs/exports, and "zfs
113: unshare" removes it.
115: \todo Explain how /etc/zfs/exports is used.
117: This is reported to work on 9.0 STABLE, but to cause a panic on
118: current (20200302). See [misc/55042](http://gnats.netbsd.org/55042).
120: ## zvol
122: Within a ZFS pool, the standard approach is to have file systems, but
123: one can also create a zvol, which is a block device of a certain size.
125: \todo The zvol will appear as /dev/???? and can be used in many
126: respects like a slice. However, the system will not read disklabels
127: and gpt labels from a zvol; in this respect it is more like a disklabel
128: partition or wedge than a disk drive.
130: \todo Explain that one can export a zvol via iscsi.
132: \todo Explain if one can swap on a zvol.
134: \todo Explain that one can use ccd to create a normal-looking disk
135: from a zvol. This allows reading a GPT label from the zvol, which is
136: useful in case the zvol had been exported via iscsi and some other
137: system created a label.
139: # Memory usage
141: Basically, ZFS uses lots of memory and most people run it on systems
142: with large amounts of memory. NetBSD works well on systems with
143: comparatively small amounts of memory. So a natural question is how
144: well ZFS works on one's VAX with 2M of RAM :-) More seriously, one
145: might ask if it is reasonable to run ZFS on a RPI3 with 1G of RAM, or
146: if it is reasonable on a system with 4G.
148: The prevailing wisdom is more or less that ZFS consumes 1G plus 1G per
149: 1T of disk. 32-bit architectures are viewed as too small to run ZFS.
151: Besides RAM, zfs requires that architecture kernel stack size is at
152: least 12KB or more -- some operations cause stack overflow with 8KB
153: kernel stack. On NetBSD, the architectures with 16KB kernel stack are
154: amd64, sparc64, powerpc, and experimental ia64, hppa. mac68k and sh3
155: have 12KB kernel stack. All others use only 8KB stack, which is not
156: enough to run zfs.
158: NetBSD has many statistics provided via sysctl; see "sysctl
161: FreeBSD has tunables that NetBSD does not seem to have, described in
162: [FreeBSD Handbook ZFS Advanced
165: # Interoperability with other systems
167: Modern ZFS uses pool version 5000 and feature flags.
169: It is in general possible to export a pool and them import the pool on
170: some other system, as long as the other system supports all the used
173: \todo Explain how to do this and what is known to work.
175: \todo Explain feature flags relationship to FreeBSD, Linux, iIllumos,
178: # Sources of ZFS code
180: Currently, there are multiple ZFS projects and codebases:
182: - [OpenZFS](http://www.open-zfs.org/wiki/Main_Page)
183: - [openzfs repository](https://github.com/openzfs/zfs}
184: - [zfsonlinux](https://zfsonlinux.org/)
185: - [OpenZFS on OS X ](https://openzfsonosx.org/) [repo](https://github.com/openzfsonosx)
186: - proprietary ZFS in Solaris (not relevant in open source)
187: - ZFS as released under the CDDL (common ancestor, now of historical interest)
189: OpenZFS is a coordinating project to align open ZFS codebases. There
190: is a notion of a shared core codebase and OS-specific adaptation code.
192: - [zfsonlinux relationship to OpenZFS](https://github.com/openzfs/zfs/wiki/OpenZFS-Patches)
193: - FreeBSD more or less imports code from openzfs and pushes back fixes. \todo Verify this.
194: - NetBSD has imported code from FreeBSD.
195: - The status of ZFS on macOS is unclear (2021-02).
CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb