# How to install NetBSD/amd64 current on MacBook Air 11 inch (mid 2012)
For older MacBook, please read [how to install netbsd on an apple macbook with core2duo](http://wiki.netbsd.org/tutorials/how_to_install_netbsd_on_an_apple_macbook_with_core2duo/)
This tutorial is based on it.
[[!toc startlevel=2 levels=2]]
## Caution
* To follow this tutorial, you must have other NetBSD or other Unix like operating system installation to create no-dkwedge kernel.
* With this tutorial, your MacBook Air's default operating system becomes NetBSD! You can boot OS X with Power+option.
* Do not try to install NetBSD on dkwedge partition (/dev/dk*) and with dkwedge enabled kernel, I cannot install NetBSD to hybrid MBR disk, so I have gotten "newfs: /dev/rwd0a: open for read: Device busy" error message.
See [PR/39510](http://gnats.netbsd.org/39510).
If you can install NetBSD to dkwedge partition, please tell me!
All my attempts are failed :(
* Do not install NetBSD bootselect code in sysinst.
* Installing NetBSD/i386 is not tested.
* I have not tested modular-xorg (X.org from pkgsrc).
## What works and what doesn't
### This stuff all seems to work fine
* SATA disk drivers
* Keyboard
* TrackPad (as one button mouse, no multitouch extension)
* USB 2.0/1.0 (no USB 3.0)
* FaceTime HD Camera (uvideo device; I have not tested yet)
* Keyboard backlight
### What Doesn't work
* Internal BCM43224 WiFi adapter
* Sound (hdaudio seems work, but if you disable boot sound,
you have no audio from internal speaker)
* Bluetooth device (with patches in [PR/46992](http://gnats.netbsd.org/46992), it works)
## Creating a new partition for NetBSD
Probably you can resize your HFS+ partition with OS X's diskutil command.
But I have not tested.
Default HFS+ partition is journaled, but case insensitive.
If you love case sensitive filesystem like me.
Please follow the steps.
### Create OS X Recovery USB stick
You can create OS X Recovery USB stick with "OS X Recovery Disk Assistant"
utility in OS X.
At first, create OS X Recovery USB stick.
### Boot from OS X Recovery USB Stick
You can boot from the USB stick with Power+option boot.
### Remove OS X partition and create two partitions
First partition is 20GB and prepared for HFS+ (journaled and case sensitive).
Of cource you can choose case insensitive HFS+.
Second partition is remain, about 100GB.
You can create this partition as HFS+.
<em>Caution:</em> In this step, you must select GUID partition mode.
### Install OS X to 20GB partition
OS X fragments are downloaded from Apple's website.
Probably you can restore your OS X image from TimeMachin.
My NAS's TimeMachine functionality is broken and I cannot test it :(
### Prepare Hybrid MBR disk for classic NetBSD install
#### On OS X, download and install gdisk (GPT fdisk) utility
You can find GPT fdisk on [http://www.rodsbooks.com/gdisk/](http://www.rodsbooks.com/gdisk/).
#### On OS X, create Hybrid MBR with gdisk utility
You can find tutorial in [http://www.rodsbooks.com/gdisk/hybrid.html](http://www.rodsbooks.com/gdisk/hybrid.html).
## Prepare NetBSD install USB stick
Download NetBSD current (HEAD) snapshot image from [http://nyftp.netbsd.org/pub/NetBSD-daily/HEAD/](http://nyftp.netbsd.org/pub/NetBSD-daily/HEAD/).
And write with dd (on Unix like OS) or [rawrite32](http://www.netbsd.org/~martin/rawrite32/) (on Windows).
### Prepare no-dkwedge kernel
Remove dkwedge related stuff (remove all "options DKWEDGE*" lines)
from GENERIC kernel, and build GENERIC kernel.
If you do not know how to build kernel,
please read [How to build a kernel section of NetBSD kernel documentation](http://www.netbsd.org/docs/kernel/#how_to_build_a_kernel) .
### Copy GENERIC kernel
Mount USB stick and copy no-dkwedge kernel to it.
## Boot your MacBook Air and install NetBSD with sysinst
In detail, see [The NetBSD Guide](http://www.netbsd.org/docs/guide/en/index.html).
<em>Be careful</em>, you must not install bootselect code to your disk.
## Set NetBSD as default OS
On OS X, open terminal and run
% sudo bless --device /dev/disk0s4 --setBoot --legacy --verbose
## Appendix
### dmesg
With Thunderbolt to Gigabit Ethernet Adapter.
<pre>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.11 (NODKWEDGE) #76: Sat Sep 22 17:29:48 JST 2012
root@tellurium.elements.tetera.org:/usr/obj/sys/arch/amd64/compile/NODKWEDGE
total memory = 4002 MB
avail memory = 3870 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0xfd<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Apple Inc. MacBookAir5,1 (1.0)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, id 0x306a9
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, id 0x306a9
cpu2 at mainbus0 apid 1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, id 0x306a9
cpu3 at mainbus0 apid 3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, id 0x306a9
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <APPLE , Apple00,00000000>, AslId < ,01000013>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpivga0 at acpi0 (IGPU): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 0 7 13 20 27 33 40 47 53 60 67 73 80 87 93 100
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
SMC (APP0001) at acpi0 not configured
ALS0 (ACPI0008) at acpi0 not configured
SBS0 (ACPI0002) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
PNLF (APP0002) at acpi0 not configured
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
MEM2 (PNP0C01) at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0154 (rev. 0x09)
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0166 (rev. 0x09)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x1e31 (USB serial bus, interface 0x30, revision 0x04) at pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: vendor 1013 product 4206
hdafg0: ADC00 2ch: Mic In [Built-In]
hdafg0: DAC01 2ch: Speaker [Built-In]
hdafg0: DAC02 2ch: HP Out [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 PCM32 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0: Intel product 2806
hdafg1: duplicate pin in association
hdafg1: duplicate pin in association
hdafg1: 0ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x1e10 (rev. 0xc4)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x1e12 (rev. 0xc4)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x14e4 product 0x4353 (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x1e18 (rev. 0xc4)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: vendor 0x8086 product 0x1547 (rev. 0x03)
ppb3: PCI Express 2.0 <Upstream Port of PCI-E Switch>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci4 dev 0 function 0: vendor 0x8086 product 0x1547 (rev. 0x03)
ppb4: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1547 (miscellaneous system, revision 0x03) at pci5 dev 0 function 0 not configured
ppb5 at pci4 dev 3 function 0: vendor 0x8086 product 0x1547 (rev. 0x03)
ppb5: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci6 dev 0 function 0: vendor 0x8086 product 0x1549 (rev. 0x00)
ppb6: PCI Express 2.0 <Upstream Port of PCI-E Switch>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci7 dev 0 function 0: vendor 0x8086 product 0x1549 (rev. 0x00)
ppb7: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci8 dev 0 function 0: Broadcom BCM57762 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 19
bge0: ASIC unknown BCM57766 (0x57766000), Ethernet address 40:6c:8f:58:6c:c5
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM57765 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb8 at pci4 dev 4 function 0: vendor 0x8086 product 0x1547 (rev. 0x03)
ppb8: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci9 at ppb8 bus 55
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci4 dev 5 function 0: vendor 0x8086 product 0x1547 (rev. 0x03)
ppb9: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci10 at ppb9 bus 104
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ppb10 at pci4 dev 6 function 0: vendor 0x8086 product 0x1547 (rev. 0x03)
ppb10: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci11 at ppb10 bus 105
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 22
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1e56 (rev. 0x04)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1e03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xffffffffc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
vendor 0x8086 product 0x1e22 (SMBus serial bus, revision 0x04) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 148 us, pow 500 mW
acpicpu0: C3: FFH, lat 198 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 17000 mW, 1701 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 17000 mW, 1700 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15798 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 14620 mW, 1500 MHz
acpicpu0: P4: FFH, lat 10 us, pow 13467 mW, 1400 MHz
acpicpu0: P5: FFH, lat 10 us, pow 12337 mW, 1300 MHz
acpicpu0: P6: FFH, lat 10 us, pow 11231 mW, 1200 MHz
acpicpu0: P7: FFH, lat 10 us, pow 10150 mW, 1100 MHz
acpicpu0: P8: FFH, lat 10 us, pow 9090 mW, 1000 MHz
acpicpu0: P9: FFH, lat 10 us, pow 8053 mW, 900 MHz
acpicpu0: P10: FFH, lat 10 us, pow 7192 mW, 800 MHz
acpicpu0: P11: FFH, lat 10 us, pow 6199 mW, 700 MHz
acpicpu0: T0: FFH, lat 1 us, pow 6199 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 5785 mW, 94 %
acpicpu0: T2: FFH, lat 1 us, pow 5372 mW, 88 %
acpicpu0: T3: FFH, lat 1 us, pow 4959 mW, 82 %
acpicpu0: T4: FFH, lat 1 us, pow 4545 mW, 75 %
acpicpu0: T5: FFH, lat 1 us, pow 4132 mW, 69 %
acpicpu0: T6: FFH, lat 1 us, pow 3719 mW, 63 %
acpicpu0: T7: FFH, lat 1 us, pow 3306 mW, 57 %
acpicpu0: T8: FFH, lat 1 us, pow 2892 mW, 50 %
acpicpu0: T9: FFH, lat 1 us, pow 2479 mW, 44 %
acpicpu0: T10: FFH, lat 1 us, pow 2066 mW, 38 %
acpicpu0: T11: FFH, lat 1 us, pow 1653 mW, 32 %
acpicpu0: T12: FFH, lat 1 us, pow 1239 mW, 25 %
acpicpu0: T13: FFH, lat 1 us, pow 826 mW, 19 %
acpicpu0: T14: FFH, lat 1 us, pow 413 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1696216100 Hz quality 3000
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: <APPLE SSD TS128E>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 113 GB, 235097 cyl, 16 head, 63 sec, 512 bytes/sect x 236978176 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 8 ports with 7 removable, self powered
uhub3: 6 ports with 5 removable, self powered
uhub4 at uhub2 port 8: Standard Microsystems product 0x2512, class 9/0, rev 2.00/b.b3, addr 3
uhub4: multiple transaction translators
uhub4: 2 ports with 0 removable, self powered
uvideo0 at uhub3 port 1 configuration 1 interface 0: Apple Inc. FaceTime HD Camera (Built-in), rev 2.00/80.25, addr 3
video0 at uvideo0: Apple Inc. FaceTime HD Camera (Built-in), rev 2.00/80.25, addr 3
uhub5 at uhub4 port 1: Apple Inc. BRCM20702 Hub, class 9/0, rev 2.00/1.00, addr 4
uhub5: 3 ports with 0 removable, self powered
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: Apple Computer product 0x820a, rev 2.00/1.00, addr 5, iclass 3/1
uhidev0: 1 report ids
ukbd0 at uhidev0 reportid 1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub5 port 2 configuration 1 interface 0
uhidev1: Apple Computer product 0x820b, rev 2.00/1.00, addr 6, iclass 3/1
uhidev1: 2 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse0 at ums0 mux 0
ubt0 at uhub5 port 3
ubt0: Apple Inc. Bluetooth USB Host Controller, rev 2.00/0.86, addr 7
uhidev2 at uhub4 port 2 configuration 1 interface 0
uhidev2: Apple Inc. Apple Internal Keyboard / Trackpad, rev 2.00/2.19, addr 8, iclass 3/1
uhidev2: 9 report ids
ukbd1 at uhidev2 reportid 1: 8 modifier keys, 6 key codes, apple fn key
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhid0 at uhidev2 reportid 9: input=0, output=0, feature=3
uhidev3 at uhub4 port 2 configuration 1 interface 1
uhidev3: Apple Inc. Apple Internal Keyboard / Trackpad, rev 2.00/2.19, addr 8, iclass 3/0
uhidev3: 68 report ids
uhid1 at uhidev3 reportid 68: input=511, output=0, feature=0
uhidev4 at uhub4 port 2 configuration 1 interface 2
uhidev4: Apple Inc. Apple Internal Keyboard / Trackpad, rev 2.00/2.19, addr 8, iclass 3/1
uhidev4: 2 report ids
ums1 at uhidev4 reportid 2: 3 buttons
wsmouse1 at ums1 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
clock: unknown CMOS layout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
</pre>
### /etc/X1/xorg.conf for native X.org
With this xorg.conf, you can find one problem.
Real display size is 1366x768, but detected one is 1368x768 :(
<pre><code>
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/X11R7/lib/modules"
FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R7/lib/X11/fonts/100dpi/"
FontPath "/usr/pkg/lib/X11/fonts/local/"
FontPath "/usr/pkg/lib/X11/fonts/TTF/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
Load "record"
Load "shadow"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbOptions" "ctrl:nocaps"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
# Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
</code></pre>
CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb
![[BACK]](/icons/back.gif){kind=icon}
Return to how_to_install_netbsd_amd64_to_macbook_air_11_inch.mdwn CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [NetBSD Developer Wiki] / wikisrc / users / ryoon