File:  [NetBSD Developer Wiki] / wikisrc / users / jruoho / clp-315w.mdwn
Revision 1.9: download - view: text, annotated - select for diffs
Mon Jun 13 12:00:05 2011 UTC (4 years, 3 months ago) by jruoho
Branches: MAIN
CVS tags: HEAD

# Samsung CLP-315W on NetBSD

is a low-end color laser printer, featuring USB, Ethernet, and wireless
access. It works on NetBSD. A brief HOWTO follows.

For initial configuration, I used a NetBSD host and standard [[!template
id=man name="dhcpd" section="8"]].  The printer provides its own HTTP server
from which all standard configuration options are available.  Also IEEE
802.11 worked with a NetBSD router.  But unfortunately, a local host is
still required as the printer only speaks a non-standard format language.

The so-called
is a prerequisite. This is available from [[!template id=man name="pkgsrc"

	# cd /usr/pkgsrc/foomatic-filters
	# make install package clean

Samsung uses a special QPDL wire protocol, supported by
[foo2qpdl]( For installation, fetch the
sources and compile:

	$ cd /tmp
	$ ftp
	$ cd foo2zjs
	$ gmake

If you have problems with the compilation, check the `Makefile` for odd
`CFLAGS` possibly not yet supported by the NetBSD's [[!template id=man
name="cc" section="1"]].  After having the sources successfully compiled, I
decided to organize the files to `/usr/local`.  From the compiled sources
only the following are required:

	# cp foo2qpdl /usr/local/bin
	# cp foo2qpdl-wrapper /usr/local/bin

	# cp foo2zjs /usr/local/bin
	# cp foo2zjs-pstops /usr/local/bin

Note the permissions:

	# chown root:wheel /usr/local/bin/foo*
	# chmod 0555 /usr/local/bin/foo*

	# chown root:wheel /usr/local/share/*
	# chmod 0444 /usr/local/share/samsung*

I used the following as the [PostScript printer
(PPD) file. In order to avoid wasting the color toner cartridges, I used two
separate files for monochrome and color setup:

	# cd /tmp/foo2zjs/PPD
	# cp Samsung-CLP-310.ppd /usr/local/share/samsung-mono.ppd
	# cp Samsung-CLP-310.ppd /usr/local/share/samsung-color.ppd

	# chown root:wheel /usr/local/share/*
	# chmod 0444 /usr/local/share/samsung*

By default, the used PPD file does not use colors. This was solved by
editing the `samsung-color.ppd` file:

	# diff -ur Samsung-CLP-310.ppd /usr/local/share/samsung-color.ppd

	--- Samsung-CLP-310.ppd 2011-03-08 09:01:45.000000000 +0200
	+++ samsung-color.ppd   2011-03-12 11:02:17.000000000 +0200
	@@ -98,7 +98,7 @@
	 *OpenUI *ColorMode/Color Mode: PickOne
	 *FoomaticRIPOption ColorMode: enum CmdLine A
	 *OrderDependency: 120 AnySetup *ColorMode
	-*DefaultColorMode: Monochrome
	+*DefaultColorMode: Color
	 *ColorMode Color/Color: "%% FoomaticRIPOptionSetting: ColorMode=Color"
	 *FoomaticRIPOptionSetting ColorMode=Color: "-c "
	 *ColorMode Monochrome/Monochrome: "%% FoomaticRIPOptionSetting:

The following network setup was used: one host named `print.lan` was
dedicated to forward the printing requests to the printer or `printer.lan`. 
This way all hosts inside the LAN can easily use the printer. Two entries
were required for the [[!template id=man name="printcap" section="5"]] file:

	# Color (default; just 'lpr').

	# Monochrome ('lpr -P lpm').  

Finally, enable [[!template id=man name="lpd" section="8"]] in
[[!template id=man name="rc.conf" section="5"]]:

	lpd_flags="-r -n 2"


CVSweb for NetBSD wikisrc <> software: FreeBSD-CVSweb