Diff for /wikisrc/users/jruoho/clp-315w.mdwn between versions 1.4 and 1.6

version 1.4, 2011/06/08 14:34:30 version 1.6, 2011/06/08 14:49:32
Line 5  Samsung Line 5  Samsung
 is a low-end color laser printer, featuring USB, Ethernet, and wireless  is a low-end color laser printer, featuring USB, Ethernet, and wireless
 access. It works on NetBSD. A brief HOWTO follows.  access. It works on NetBSD. A brief HOWTO follows.
   
 For initial configuration I used a NetBSD host and standard  For initial configuration, I used a NetBSD host and standard [[!template
 [[!template id=man name="dhcpd" section="8"]]. The printer provides a HTTP  id=man name="dhcpd" section="8"]].  The printer provides its own HTTP server
 daemon from which all standard configuration options are available.  from which all standard configuration options are available.  Also IEEE
 Also IEEE i802.11 worked with a NetBSD router. But unfortunately, a local  802.11 worked with a NetBSD router.  But unfortunately, a local host is
 host is still required as the printer only speaks a non-standard format  still required as the printer only speaks a non-standard format language.
 language.  
   
 The so-called  The so-called
 [foomatic](http://www.linuxfoundation.org/collaborate/workgroups/openprinting/databasefoomatic)  [foomatic](http://www.linuxfoundation.org/collaborate/workgroups/openprinting/databasefoomatic)
 is a prerequisite.  This is available from [[!template id=man name="pkgsrc"  is a prerequisite. This is available from [[!template id=man name="pkgsrc"
 section="7"]]:  section="7"]]:
   
 > # cd /usr/pkgsrc/foomatic-filters          # cd /usr/pkgsrc/foomatic-filters
 > # make install package clean          # make install package clean
   
 Samsung uses a special QPDL wire protocol, supported by  Samsung uses a special QPDL wire protocol, supported by
 [foo2qpdl](http://foo2qpdl.rkkda.com/). For installation, first fetch the  [foo2qpdl](http://foo2qpdl.rkkda.com/). For installation, fetch the
 sources:  sources and compile:
   
 > $ mkdir /tmp/foo && cd /tmp/foo          $ cd /tmp
 > $ ftp http://foo2zjs.rkkda.com/foo2zjs.tar.gz          $ ftp http://foo2zjs.rkkda.com/foo2zjs.tar.gz
           $ cd foo2zjs
           $ gmake
   
 and then compile  If you have problems with the compilation, check the 'Makefile' for odd
   'CFLAGS' possibly not yet supported by the NetBSD's [[!template
   id=man name="cc" section="1"]].
   
 > $ gmake  I organized everything under '/usr/local'. From the compiled sources only
   the following are required:
   
 I organized everything under /usr/local.          # cp foo2qpdl /usr/local/bin
           # cp foo2qpdl-wrapper /usr/local/bin
   
 > chown root:wheel /usr/local/bin/foo*          # cp foo2zjs /usr/local/bin
 > chmod 0555 /usr/local/bin/foo*          # cp foo2zjs-pstops /usr/local/bin
   
 > chown root:wheel /usr/local/share/*  Remember to adjust the permissions:
 > chmod 0444 /usr/local/share/samsung*  
           # chown root:wheel /usr/local/bin/foo*
           # chmod 0555 /usr/local/bin/foo*
   
           # chown root:wheel /usr/local/share/*
           # chmod 0444 /usr/local/share/samsung*

Removed from v.1.4  
changed lines
  Added in v.1.6


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb