Diff for /wikisrc/users/jruoho/clp-315w.mdwn between versions 1.3 and 1.13

version 1.3, 2011/06/08 14:18:22 version 1.13, 2011/06/13 12:21:28
Line 3 Line 3
 Samsung  Samsung
 [CLP-315W](http://www.amazon.com/Samsung-CLP-315W-Color-Laser-Printer/dp/B001BXS45I)  [CLP-315W](http://www.amazon.com/Samsung-CLP-315W-Color-Laser-Printer/dp/B001BXS45I)
 is a low-end color laser printer, featuring USB, Ethernet, and wireless  is a low-end color laser printer, featuring USB, Ethernet, and wireless
 access. It works on NetBSD. A brief HOWTO follows.  access.  It works on NetBSD.  The configuration was relatively painless with
   the standard tools supported by NetBSD. There was no need for something as
   complex as [CUPS](http://www.cups.org/).
   For initial configuration, I used a NetBSD host and standard [[!template
   id=man name="dhcpd" section="8"]].  The printer provides its own HTTP server
   from which all standard configuration options are available.  Also IEEE
   802.11 worked with a NetBSD router.  But unfortunately, a local host is
   still required as the printer only speaks a non-standard format language.
   The so-called
   is a prerequisite. This is available from [[!template id=man name="pkgsrc"
           # cd /usr/pkgsrc/foomatic-filters
           # make install package clean
 Samsung uses a special QPDL wire protocol, supported by  Samsung uses a special QPDL wire protocol, supported by
 [foo2qpdl](http://foo2qpdl.rkkda.com/). For installation, first fetch the  [foo2qpdl](http://foo2qpdl.rkkda.com/). For installation, fetch the
 sources:  sources and compile:
           $ cd /tmp
           $ ftp http://foo2zjs.rkkda.com/foo2zjs.tar.gz
           # tar xvfz foo2zjs.tar.gz
           $ cd foo2zjs
           $ gmake
   If you have problems with the compilation, check the `Makefile` for odd
   `CFLAGS` possibly not yet supported by the NetBSD's [[!template id=man
   name="cc" section="1"]].  After having the sources successfully compiled,
   the required files were organized to `/usr/local`. From the compiled
   sources only the following are required:
           # mkdir -p /usr/local/bin
           # cp foo2qpdl /usr/local/bin
           # cp foo2qpdl-wrapper /usr/local/bin
           # cp foo2zjs /usr/local/bin
           # cp foo2zjs-pstops /usr/local/bin
   Note the permissions:
           # chown root:wheel /usr/local/bin/foo*
           # chmod 0555 /usr/local/bin/foo*
   I used the following as the [PostScript printer
   (PPD) file. In order to avoid wasting the color toner cartridges, two
   separate files for monochrome and color setup were used:
           # mkdir -p /usr/local/share
           # cd /tmp/foo2zjs/PPD
           # cp Samsung-CLP-310.ppd /usr/local/share/samsung-mono.ppd
           # cp Samsung-CLP-310.ppd /usr/local/share/samsung-color.ppd
           # chown root:wheel /usr/local/share/*
           # chmod 0444 /usr/local/share/samsung*
   By default, the used PPD file does not use colors. This was solved by
   editing the `samsung-color.ppd` file:
           # diff -ur Samsung-CLP-310.ppd /usr/local/share/samsung-color.ppd
           --- Samsung-CLP-310.ppd 2011-03-08 09:01:45.000000000 +0200
           +++ samsung-color.ppd   2011-03-12 11:02:17.000000000 +0200
           @@ -98,7 +98,7 @@
            *OpenUI *ColorMode/Color Mode: PickOne
            *FoomaticRIPOption ColorMode: enum CmdLine A
            *OrderDependency: 120 AnySetup *ColorMode
           -*DefaultColorMode: Monochrome
           +*DefaultColorMode: Color
            *ColorMode Color/Color: "%% FoomaticRIPOptionSetting: ColorMode=Color"
            *FoomaticRIPOptionSetting ColorMode=Color: "-c "
            *ColorMode Monochrome/Monochrome: "%% FoomaticRIPOptionSetting:
   The following network setup was used: one host named `print.lan` was
   dedicated to forward the printing requests to the printer or `printer.lan`. 
   This way all hosts inside the LAN can easily use the printer. Two entries
   were required for the [[!template id=man name="printcap" section="5"]] file:
           # Color (default; just 'lpr').
           # Monochrome ('lpr -P lpm').  
   Thus, for color and monochrome output, respectively, one needs only:
           lpr /etc/passwd
           lpr -P /etc/passwd
   Remote clients can access the `print.lan` host by using:
           # We have a CNAME record for the printer host inside LAN.
           lp|rp|remote printer:\
   Finally, enable [[!template id=man name="lpd" section="8"]] in
   [[!template id=man name="rc.conf" section="5"]]:
 > $ ftp http://foo2zjs.rkkda.com/foo2zjs.tar.gz          lpd=YES
           lpd_flags="-r -n 2"
   The output quality is relatively good. There are no visible differences
   compared to the output with Windows and Samsung's own drivers.

Removed from v.1.3  
changed lines
  Added in v.1.13

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb