Diff for /wikisrc/users/jruoho/clp-315w.mdwn between versions 1.8 and 1.10

version 1.8, 2011/06/08 14:53:51 version 1.10, 2011/06/13 12:07:20
Line 25  sources and compile: Line 25  sources and compile:
   
         $ cd /tmp          $ cd /tmp
         $ ftp http://foo2zjs.rkkda.com/foo2zjs.tar.gz          $ ftp http://foo2zjs.rkkda.com/foo2zjs.tar.gz
           # tar xvfz foo2zjs.tar.gz
         $ cd foo2zjs          $ cd foo2zjs
         $ gmake          $ gmake
   
 If you have problems with the compilation, check the `Makefile` for odd  If you have problems with the compilation, check the `Makefile` for odd
 `CFLAGS` possibly not yet supported by the NetBSD's [[!template id=man  `CFLAGS` possibly not yet supported by the NetBSD's [[!template id=man
 name="cc" section="1"]].  After having the sources successfully compiled, I  name="cc" section="1"]].  After having the sources successfully compiled,
 decided to organize the files to `/usr/local`.  From the compiled sources  the required files were organized to `/usr/local`. From the compiled
 only the following are required:  sources only the following are required:
   
           # mkdir -p /usr/local/bin
   
         # cp foo2qpdl /usr/local/bin          # cp foo2qpdl /usr/local/bin
         # cp foo2qpdl-wrapper /usr/local/bin          # cp foo2qpdl-wrapper /usr/local/bin
Line 45  Note the permissions: Line 48  Note the permissions:
         # chown root:wheel /usr/local/bin/foo*          # chown root:wheel /usr/local/bin/foo*
         # chmod 0555 /usr/local/bin/foo*          # chmod 0555 /usr/local/bin/foo*
   
   I used the following as the [PostScript printer
   description](http://en.wikipedia.org/wiki/PostScript_Printer_Description)
   (PPD) file. In order to avoid wasting the color toner cartridges, two
   separate files for monochrome and color setup were used:
   
           # mkdir -p /usr/local/share
   
           # cd /tmp/foo2zjs/PPD
           # cp Samsung-CLP-310.ppd /usr/local/share/samsung-mono.ppd
           # cp Samsung-CLP-310.ppd /usr/local/share/samsung-color.ppd
   
         # chown root:wheel /usr/local/share/*          # chown root:wheel /usr/local/share/*
         # chmod 0444 /usr/local/share/samsung*          # chmod 0444 /usr/local/share/samsung*
   
 TBD.  By default, the used PPD file does not use colors. This was solved by
   editing the `samsung-color.ppd` file:
   
           # diff -ur Samsung-CLP-310.ppd /usr/local/share/samsung-color.ppd
   
           --- Samsung-CLP-310.ppd 2011-03-08 09:01:45.000000000 +0200
           +++ samsung-color.ppd   2011-03-12 11:02:17.000000000 +0200
           @@ -98,7 +98,7 @@
            *OpenUI *ColorMode/Color Mode: PickOne
            *FoomaticRIPOption ColorMode: enum CmdLine A
            *OrderDependency: 120 AnySetup *ColorMode
           -*DefaultColorMode: Monochrome
           +*DefaultColorMode: Color
            *ColorMode Color/Color: "%% FoomaticRIPOptionSetting: ColorMode=Color"
            *FoomaticRIPOptionSetting ColorMode=Color: "-c "
            *ColorMode Monochrome/Monochrome: "%% FoomaticRIPOptionSetting:
            *ColorMode=Monochrome"
   
   The following network setup was used: one host named `print.lan` was
   dedicated to forward the printing requests to the printer or `printer.lan`. 
   This way all hosts inside the LAN can easily use the printer. Two entries
   were required for the [[!template id=man name="printcap" section="5"]] file:
   
           # Color (default; just 'lpr').
           #
           lp|rp:\
                   :lp=:\
                   :rp=lp:\
                   :rm=printer.lan:\
                   :lf=/var/log/lpd-errs:\
                   :sd=/var/spool/output/lpd:\
                   :af=/usr/local/share/samsung-color.ppd:\
                   :if=/usr/pkg/bin/foomatic-rip:\
                   :mx#0:
   
           # Monochrome ('lpr -P lpm').  
           #
           lpm|rpm:\
                   :lp=:\
                   :rp=lp:\
                   :rm=printer.lan:\
                   :lf=/var/log/lpd-errs:\
                   :sd=/var/spool/output/lpd:\
                   :af=/usr/local/share/samsung-mono.ppd:\ 
                   :if=/usr/pkg/bin/foomatic-rip:\
                   :mx#0:
   
   The clients can access the `print.lan` host by using:
   
           # We have a CNAME record for the printer host inside LAN.
           #
           lp|rp|remote printer:\
                   :lp=:\
                   :rp=lp:\
                   :rm=print.lan:\
                   :sd=/var/spool/output/lpd:\
                   :lf=/var/log/lpd-errs:
   
   
   Finally, enable [[!template id=man name="lpd" section="8"]] in
   [[!template id=man name="rc.conf" section="5"]]:
   
           lpd=YES
           lpd_flags="-r -n 2"
   
   The output quality is relatively good. There are no visible differences
   compared to the output with Windows and Samsung's own drivers.

Removed from v.1.8  
changed lines
  Added in v.1.10


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb