Diff for /wikisrc/users/jruoho/clp-315w.mdwn between versions 1.6 and 1.10

version 1.6, 2011/06/08 14:49:32 version 1.10, 2011/06/13 12:07:20
Line 25  sources and compile: Line 25  sources and compile:
         $ cd /tmp          $ cd /tmp
         $ ftp http://foo2zjs.rkkda.com/foo2zjs.tar.gz          $ ftp http://foo2zjs.rkkda.com/foo2zjs.tar.gz
           # tar xvfz foo2zjs.tar.gz
         $ cd foo2zjs          $ cd foo2zjs
         $ gmake          $ gmake
 If you have problems with the compilation, check the 'Makefile' for odd  If you have problems with the compilation, check the `Makefile` for odd
 'CFLAGS' possibly not yet supported by the NetBSD's [[!template  `CFLAGS` possibly not yet supported by the NetBSD's [[!template id=man
 id=man name="cc" section="1"]].  name="cc" section="1"]].  After having the sources successfully compiled,
   the required files were organized to `/usr/local`. From the compiled
   sources only the following are required:
 I organized everything under '/usr/local'. From the compiled sources only          # mkdir -p /usr/local/bin
 the following are required:  
         # cp foo2qpdl /usr/local/bin          # cp foo2qpdl /usr/local/bin
         # cp foo2qpdl-wrapper /usr/local/bin          # cp foo2qpdl-wrapper /usr/local/bin
Line 41  the following are required: Line 43  the following are required:
         # cp foo2zjs /usr/local/bin          # cp foo2zjs /usr/local/bin
         # cp foo2zjs-pstops /usr/local/bin          # cp foo2zjs-pstops /usr/local/bin
 Remember to adjust the permissions:  Note the permissions:
         # chown root:wheel /usr/local/bin/foo*          # chown root:wheel /usr/local/bin/foo*
         # chmod 0555 /usr/local/bin/foo*          # chmod 0555 /usr/local/bin/foo*
   I used the following as the [PostScript printer
   (PPD) file. In order to avoid wasting the color toner cartridges, two
   separate files for monochrome and color setup were used:
           # mkdir -p /usr/local/share
           # cd /tmp/foo2zjs/PPD
           # cp Samsung-CLP-310.ppd /usr/local/share/samsung-mono.ppd
           # cp Samsung-CLP-310.ppd /usr/local/share/samsung-color.ppd
         # chown root:wheel /usr/local/share/*          # chown root:wheel /usr/local/share/*
         # chmod 0444 /usr/local/share/samsung*          # chmod 0444 /usr/local/share/samsung*
   By default, the used PPD file does not use colors. This was solved by
   editing the `samsung-color.ppd` file:
           # diff -ur Samsung-CLP-310.ppd /usr/local/share/samsung-color.ppd
           --- Samsung-CLP-310.ppd 2011-03-08 09:01:45.000000000 +0200
           +++ samsung-color.ppd   2011-03-12 11:02:17.000000000 +0200
           @@ -98,7 +98,7 @@
            *OpenUI *ColorMode/Color Mode: PickOne
            *FoomaticRIPOption ColorMode: enum CmdLine A
            *OrderDependency: 120 AnySetup *ColorMode
           -*DefaultColorMode: Monochrome
           +*DefaultColorMode: Color
            *ColorMode Color/Color: "%% FoomaticRIPOptionSetting: ColorMode=Color"
            *FoomaticRIPOptionSetting ColorMode=Color: "-c "
            *ColorMode Monochrome/Monochrome: "%% FoomaticRIPOptionSetting:
   The following network setup was used: one host named `print.lan` was
   dedicated to forward the printing requests to the printer or `printer.lan`. 
   This way all hosts inside the LAN can easily use the printer. Two entries
   were required for the [[!template id=man name="printcap" section="5"]] file:
           # Color (default; just 'lpr').
           # Monochrome ('lpr -P lpm').  
   The clients can access the `print.lan` host by using:
           # We have a CNAME record for the printer host inside LAN.
           lp|rp|remote printer:\
   Finally, enable [[!template id=man name="lpd" section="8"]] in
   [[!template id=man name="rc.conf" section="5"]]:
           lpd_flags="-r -n 2"
   The output quality is relatively good. There are no visible differences
   compared to the output with Windows and Samsung's own drivers.

Removed from v.1.6  
changed lines
  Added in v.1.10

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb