Diff for /wikisrc/tutorials/how_to_install_netbsd_on_a_power_macintosh_g4___40__grey__41__.mdwn between versions 1.2 and 1.6

version 1.2, 2017/04/15 05:40:44 version 1.6, 2017/04/15 06:09:22
Line 24  Now, wait until sysinst shows up, but do Line 24  Now, wait until sysinst shows up, but do
   
 Please configure now your integrated gem0 (100baseTX) or wi0 (WLAN) NIC to have an internet connection to match your local network configuration and exit the sysinst program.  Please configure now your integrated gem0 (100baseTX) or wi0 (WLAN) NIC to have an internet connection to match your local network configuration and exit the sysinst program.
   
 #Fetching pdisk  
   
 We will need to fetch pdisk, the partition tool to partition the hard disk. To fetch pdisk from your local ftp mirror enter:  
   
     # cd /sbin  
     # ftp -a ftp://ftp3.de.netbsd.org/pub/NetBSD/arch/macppc/netbsd-pdisk/netbsd-pdisk.macppc-1-6  
   
 and rename it to pdisk  
   
     # mv netbsd-pdisk.macppc-1-6 pdisk  
           
 #Partitioning the hard disk  #Partitioning the hard disk
   
 Now we're going to partition the disk. Enter:  Now we're going to partition the disk. Enter:
Line 76  Write the partition map using w.  Line 65  Write the partition map using w. 
   
 Now newfs your partitions:  Now newfs your partitions:
   
     # newfs /dev/wd0x      # newfs /dev/rwd0x
   
   Replacing x with the partition name.
   
 Note: Don't care about error messages that newfs couldn't touch the disklabel - that's right since we've created everything with pdisk.  Note: Don't care about error messages that newfs couldn't touch the disklabel - that's right since we've created everything with pdisk.
   
Line 98  Create the file fstab that should match  Line 89  Create the file fstab that should match 
     # echo /dev/wd0g /var ffs rw 1 2 >> /mnt2/etc/fstab      # echo /dev/wd0g /var ffs rw 1 2 >> /mnt2/etc/fstab
     # echo /dev/wd0f /usr ffs rw 1 2 >> /mnt2/etc/fstab      # echo /dev/wd0f /usr ffs rw 1 2 >> /mnt2/etc/fstab
     # echo /dev/wd0h /home ffs rw 1 2 >> /mnt2/etc/fstab      # echo /dev/wd0h /home ffs rw 1 2 >> /mnt2/etc/fstab
       # echo ptyfs /dev/pts ptyfs rw 0 0 >> /mnt2/etc/fstab
   
 #Umount  #Umount
   
Line 141  Please set: Line 133  Please set:
     rc_configured=YES      rc_configured=YES
     wscons=YES      wscons=YES
     hostname=my.powermac.g4      hostname=my.powermac.g4
     dhclient=yes      dhcpcd=yes
   
 Please use /etc/ifconfig.gem0 if you don't have a DHCP Server in your network and remove dhclient=yes from rc.conf  Please use /etc/ifconfig.gem0 if you don't have a DHCP Server in your network and remove dhcpcd=yes from rc.conf
   
 Right now, set up your network. Either use dhclient to configure your network via DHCP  Right now, set up your network. Either use dhcpcd to configure your network via DHCP
   
     # dhclient gem0        # dhcpcd gem0  
   
 or manually specify your network using ifconfig.  or manually specify your network using ifconfig.
   

Removed from v.1.2  
changed lines
  Added in v.1.6


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb