Diff for /wikisrc/tutorials/how_to_enable_and_run_dtrace.mdwn between versions 1.1 and 1.16

version 1.1, 2011/11/20 20:55:21 version 1.16, 2017/03/22 15:56:53
Line 1 Line 1
 DTrace is a Dynamic Tracing framework developed by Sun and ported to NetBSD. It enables extensive instrumentation of the kernel and user space. See the [DTrace Community Page](http://hub.opensolaris.org/bin/view/Community+Group+dtrace/WebHome) for more information. Also see [DTrace Introduction](http://wikis.sun.com/display/DTrace/Introduction).  DTrace is a Dynamic Tracing framework developed by Sun and ported to NetBSD. It enables extensive instrumentation of the kernel and user space. See the [DTrace Community Page](http://dtrace.org) for more information.
   Also see [DTrace Introduction](http://dtrace.org/guide/preface.html), Brendan Gregg's [DTrace one liners](http://www.brendangregg.com/DTrace/dtrace_oneliners.txt) and his notes for [DTrace on FreeBSD](https://wiki.freebsd.org/DTrace/).
   
 DTrace is a work-in-progress effort and it is for i386 systems only. Two providers are available; the Statically Defined Tracing (SDT) provider and the Function Boundary Tracer (FBT) provider.  # Current status
   
 You can currently run a hello world DScript.  ## Supported platforms
   
 ##  Building DTrace  DTrace is a work-in-progress effort and it is for x86 systems and some arm boards.
   
 You need the following options in your kernel:  * i386 and amd64
      * earm* (evbarm and armv4 based ports (armv4 side requires further testing but system is built with CTF)
     options         INSECURE  
     options         KDTRACE_HOOKS   # DTrace support  ## Supported providers
     options         MODULAR  
      * SDT: Statically Defined Tracing
   * FBT: Function Boundary Tracing
 You also need to build distribution with the options MKMODULAR=yes and MKDTRACE=yes.  * Lockstat: Kernel Lock Statistics
   * Profile: Time based interrupt event source for Profiling
 ##  Running hello world  * Syscall: System Calls
   * Syscall Linux (32bit & 64 bit): System calls via the Linux binary emulation layer
 Load the solaris and dtrace modules, and the SDT (Statically Defined Tracing) and FBT (Function Boundary Tracing) modules:  
      ## TODO for netbsd-7
     modload solaris  
     modload dtrace  * Measure effect of `options KDTRACE_HOOKS` on system performance.
     modload sdt  * Determine whether the profile module works and list it here.
     modload fbt  * Integrate [[riz|users/riz]]'s syscall provider patch.
      
   ## TODO for netbsd-6
 Make the dtrace device node:  
      Need to identify changes to pull up to netbsd-6 and pull them up.
     mkdir /dev/dtrace  Candidates:
     mknod /dev/dtrace/dtrace c dtrace 0  
      * Profile provider.
   
 List the dtrace probes  # How to use
      
     dtrace -l  ##  Building DTrace 
      
        ID   PROVIDER            MODULE                          FUNCTION NAME  You need the following options in your kernel: 
         1     dtrace                                                     BEGIN      
         2     dtrace                                                     END      options         KDTRACE_HOOKS   # kernel DTrace hooks
         3     dtrace                                                     ERROR      options         MODULAR
         4        fbt            netbsd             AcpiAcquireGlobalLock entry  
         5        fbt            netbsd             AcpiAcquireGlobalLock return  Optionally:
         6        fbt            netbsd             AcpiAllocateRootTable entry  
         7        fbt            netbsd                    AcpiAttachData entry      options         INSECURE   # permit modules to loaded from user space once system has gone multiuser and securelevel has been raised.
         .  
         .  A Distribution needs to be built with the options `MKDTRACE=yes` and `MKCTF=yes`, this is taken care of automatically and doesn't need to be specified manually. The list of platforms it is applied to automatically is set in `src/share/mk/bsd.own.mk`
     29129        fbt           solaris                   zfs_vop_getattr entry  
     29130        fbt           solaris                   zfs_vop_getattr return  Set the system to load the solaris and dtrace related modules in `/etc/modules.conf`, for a list of available modules, see `/stand/$MACHINE/$VERSION/modules/`
     29131       proc                                                     create      
     29132       proc                                                     exec      solaris
         .      dtrace
         .      dtrace_sdt
     29140       proc                                                     lwp_start      dtrace_fbt
     29141       proc                                                     lwp_exit      dtrace_lockstat
          dtrace_profile
       dtrace_syscall
        
   A `dtrace` device node is created automatically in `/dev/dtrace` when the modules are loaded into place.
       
 Put the following into the file hello.d  List the dtrace probes 
          
     BEGIN      dtrace -l
     {      
         trace("Hello world");         ID   PROVIDER            MODULE                          FUNCTION NAME
         exit(0);          1     dtrace                                                     BEGIN
     }          2     dtrace                                                     END
              3     dtrace                                                     ERROR
           4        fbt            netbsd             AcpiAcquireGlobalLock entry
 Run the hello world script:          5        fbt            netbsd             AcpiAcquireGlobalLock return
              6        fbt            netbsd             AcpiAllocateRootTable entry
     dtrace -s hello.d          7        fbt            netbsd                    AcpiAttachData entry
              . 
     dtrace: script './hello.d' matched 1 probe          .
     CPU     ID                    FUNCTION:NAME      29129        fbt           solaris                   zfs_vop_getattr entry 
       0      1                           :BEGIN   Hello world      29130        fbt           solaris                   zfs_vop_getattr return
          29131       proc                                                     create
       29132       proc                                                     exec 
 A more complex example that traces the execution of a sleep operation in the kernel:          .
              .
     #pragma D option flowindent      29140       proc                                                     lwp_start
          29141       proc                                                     lwp_exit
     fbt::syscall:entry  
     /execname == "sleep" && guard++ == 0/  
     {  ##  Running hello world 
             self->traceme = 1;  
             printf("fd: %d", arg0);  Put the following into the file hello.d:
     }      
          BEGIN
     fbt:::      {
     /self->traceme/          trace("Hello world");
     {}          exit(0);
          }
     fbt::syscall:return      
     /self->traceme/  
     {  Run the hello world script: 
             self->traceme = 0;      
             exit(0);      dtrace -s hello.d
     }      
          dtrace: script './hello.d' matched 1 probe
       CPU     ID                    FUNCTION:NAME
 Start the script running (dtrace -s <scriptname.d>) and then execute a sleep 2 in another shell.        0      1                           :BEGIN   Hello world
       
   
   A more complex example that traces the execution of a sleep operation
   in the kernel. Put it in sleep.d:
       
       #pragma D option flowindent
       
       fbt::syscall:entry
       /execname == "sleep" && guard++ == 0/
       {
               self->traceme = 1;
               printf("fd: %d", arg0);
       }
       
       fbt::syscall:entry /self->traceme/ {}
       
       fbt::syscall:return
       /self->traceme/
       {
               self->traceme = 0;
               exit(0);
       }
       
   
   Start the script running (dtrace -s sleep.d) and then execute a "sleep 2" in another shell. 

Removed from v.1.1  
changed lines
  Added in v.1.16


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb