[NetBSD Developer Wiki]
- view: text
- select for diffs
Fri Feb 26 18:39:20 2021 UTC
(2 months, 2 weeks ago) by gdt
CVS tags: HEAD
xen: Demote info about migration from grub
At this point anything about grub is ancient history and there's no
reason to believe there are any maintained netbsd/xen systems with
grub. We already have a place to store the old info, so simply demote
the conversion information to tidy the main HOWTO.
1: [[!meta title="Xen HowTo"]]
3: Xen is a Type 1 hypervisor which supports running multiple guest operating
4: systems on a single physical machine. One uses the Xen kernel to control the
5: CPU, memory and console, a dom0 operating system which mediates access to
6: other hardware (e.g., disks, network, USB), and one or more domU operating
7: systems which operate in an unprivileged virtualized environment. IO requests
8: from the domU systems are forwarded by the Xen hypervisor to the dom0 to be
11: This HOWTO presumes a basic familiarity with the Xen system
12: architecture, with installing NetBSD on amd64 hardware, and with
13: installing software from pkgsrc. See also the [Xen
18: # Overview
20: The basic concept of Xen is that the hypervisor (xenkernel) runs on
21: the hardware, and runs a privileged domain ("dom0") that can access
22: disks/networking/etc. One then runs additonal unprivileged domains
23: (each a "domU"), presumably to do something useful.
25: This HOWTO addresses how to run a NetBSD dom0 (and hence also build
26: xen itself). It also addresses how to run domUs in that environment,
27: and how to deal with having a domU in a Xen environment run by someone
28: else and/or not running NetBSD.
30: There are many choices one can make; the HOWTO recommends the standard
31: approach and limits discussion of alternatives in many cases.
33: ## Guest Styles
35: Xen supports different styles of guests.
37: [[!table data="""
38: Style of guest |Supported by NetBSD
39: PV |Yes (dom0, domU)
40: HVM |Yes (domU)
41: PVHVM |current-only (domU)
42: PVH |current-only (domU, dom0 not yet)
45: In Para-Virtualized (PV) mode, the guest OS does not attempt to access
46: hardware directly, but instead makes hypercalls to the hypervisor; PV
47: guests must be specifically coded for Xen.
48: See [PV](https://wiki.xen.org/wiki/Paravirtualization_(PV\)).
50: In HVM mode, no guest modification is required; however, hardware
51: support is required, such as VT-x on Intel CPUs and SVM on AMD CPUs.
52: The dom0 runs qemu to emulate hardware.
54: In PVHVM mode, the guest runs as HVM, but additionally can use PV
55: drivers for efficiency.
56: See [PV on HVM](https://wiki.xen.org/wiki/PV_on_HVM).
58: There have been two PVH modes: original PVH and PVHv2. Original PVH
59: was based on PV mode and is no longer relevant at all. PVHv2 is
60: basically lightweight HVM with PV drivers. A critical feature of it
61: is that qemu is not needed; the hypervisor can do the emulation that
62: is required. Thus, a dom0 can be PVHv2.
63: The source code uses PVH and config files use pvh; this refers to PVHv2.
64: See [PVH(v2)](https://wiki.xenproject.org/wiki/PVH_(v2\)_Domu).
66: At system boot, the dom0 kernel is loaded as a module with Xen as the kernel.
67: The dom0 can start one or more domUs. (Booting is explained in detail
68: in the dom0 section.)
70: ## CPU Architecture
72: Xen runs on x86_64 hardware (the NetBSD amd64 port).
74: There is a concept of Xen running on ARM, but there are no reports of this working with NetBSD.
76: The dom0 system should be amd64. (Instructions for i386PAE dom0 have been removed from the HOWTO.)
78: The domU can be i386PAE or amd64.
79: i386PAE at one point was considered as [faster](https://lists.xen.org/archives/html/xen-devel/2012-07/msg00085.html) than amd64.
81: ## Xen Versions
83: In NetBSD, Xen is provided in pkgsrc, via matching pairs of packages
84: xenkernel and xentools. We will refer only to the kernel versions,
85: but note that both packages must be installed together and must have
86: matching versions.
88: Versions available in pkgsrc:
90: [[!table data="""
91: Xen Version |Package Name |Xen CPU Support |EOL'ed By Upstream
92: 4.11 |xenkernel411 |x86_64 |No
93: 4.13 |xenkernel413 |x86_64 |No
96: See also the [Xen Security Advisory page](http://xenbits.xen.org/xsa/).
98: Older Xen had a python-based management tool called xm, now replaced
99: by xl.
101: ## NetBSD versions
103: Xen has been supported in NetBSD for a long time, at least since 2005.
104: Initially Xen was PV only.
106: NetBSD 8 and up support PV and HVM modes.
108: Support for PVHVM and PVH is available only in NetBSD-current.
110: NetBSD as a dom0 does not run SMP, because some drivers are not yet
111: safe for this. \todo Link to more information about what needs work.
113: NetBSD, when run as a domU, can and does typically run SMP.
115: Note: NetBSD support is called XEN3. However, it does support Xen 4,
116: because the hypercall interface has remained identical.
118: # Creating a NetBSD dom0
120: In order to install a NetBSD as a dom0, one must first install a normal
121: NetBSD system, and then pivot the install to a dom0 install by changing
122: the kernel and boot configuration.
124: In 2018-05, trouble booting a dom0 was reported with 256M of RAM: with
125: 512M it worked reliably. This does not make sense, but if you see
126: "not ELF" after Xen boots, try increasing dom0 RAM.
128: ## Installation of NetBSD
130: [Install NetBSD/amd64](/guide/inst/)
131: just as you would if you were not using Xen.
132: Therefore, use the most recent release, or a build from the most recent stable branch.
134: ## Installation of Xen
136: Use the most recent version of Xen in pkgsrc, unless the DESCR says that it is not suitable.
137: Therefore, choose 4.13.
138: In the dom0, install xenkernel413 and xentools413 from pkgsrc.
140: Once this is done, copy the Xen kernel from where pkgsrc puts it to
141: where the boot process will be able to find it:
143: [[!template id=programlisting text="""
144: # cp -p /usr/pkg/xen413-kernel/xen.gz /
147: Then, place a NetBSD XEN3_DOM0 kernel in the `/` directory. Such kernel
148: can either be compiled manually, or downloaded from the NetBSD FTP, for
149: example at:
151: [[!template id=programlisting text="""
155: Add a line to /boot.cfg to boot Xen:
157: [[!template id=filecontent name="/boot.cfg" text="""
158: menu=Xen:load /netbsd-XEN3_DOM0.gz console=pc;multiboot /xen.gz dom0_mem=512M
161: This specifies that the dom0 should have 512MB of ram, leaving the rest
162: to be allocated for domUs.
164: NB: This says add, not replace, so that you will be able to boot a
165: NetBSD kernel without Xen. Once Xen boots ok, you may want to set it
166: as default.
168: To use a serial console, add settings as follows:
170: [[!template id=filecontent name="/boot.cfg" text="""
171: menu=Xen:load /netbsd-XEN3_DOM0.gz;multiboot /xen.gz dom0_mem=512M console=com1 com1=9600,8n1
174: which will use the first serial port for Xen (which counts starting
175: from 1, unlike NetBSD which counts starting from 0), forcing
176: speed/parity. Because the NetBSD command line lacks a
177: "console=pc" argument, it will use the default "xencons" console device,
178: which directs the console I/O through Xen to the same console device Xen
179: itself uses (in this case, the serial port).
181: In an attempt to add performance, one can also add `dom0_max_vcpus=1 dom0_vcpus_pin`,
182: to force only one vcpu to be provided (since NetBSD dom0 can't use
183: more) and to pin that vcpu to a physical CPU. Xen has
184: [many boot options](http://xenbits.xenproject.org/docs/4.13-testing/misc/xen-command-line.html),
185: and other than dom0 memory and max_vcpus, they are generally not
188: Ensure that the boot scripts installed in
189: `/usr/pkg/share/examples/rc.d` are in `/etc/rc.d`, either because you
190: have `PKG_RCD_SCRIPTS=yes`, or manually. (This is not special to Xen,
191: but a normal part of pkgsrc usage.)
193: Set `xencommons=YES` in rc.conf:
195: [[!template id=filecontent name="/etc/rc.conf" text="""
199: \todo Recommend for/against xen-watchdog.
201: Now, reboot so that you are running a DOM0 kernel under Xen, rather
202: than GENERIC without Xen.
204: Once the reboot is done, use `xl` to inspect Xen's boot messages,
205: available resources, and running domains. For example:
207: [[!template id=programlisting text="""
208: # xl dmesg
209: ... xen's boot info ...
210: # xl info
211: ... available memory, etc ...
212: # xl list
213: Name Id Mem(MB) CPU State Time(s) Console
214: Domain-0 0 64 0 r---- 58.1
217: Xen logs will be in /var/log/xen.
219: ### Issues with xencommons
221: `xencommons` starts `xenstored`, which stores data on behalf of dom0 and
222: domUs. It does not currently work to stop and start xenstored.
223: Certainly all domUs should be shutdown first, following the sort order
224: of the rc.d scripts. However, the dom0 sets up state with xenstored,
225: and is not notified when xenstored exits, leading to not recreating
226: the state when the new xenstored starts. Until there's a mechanism to
227: make this work, one should not expect to be able to restart xenstored
228: (and thus xencommons). There is currently no reason to expect that
229: this will get fixed any time soon.
230: \todo Confirm if this is still true in 2020.
232: ## Xen-specific NetBSD issues
234: There are (at least) two additional things different about NetBSD as a
235: dom0 kernel compared to hardware.
237: One is that the module ABI is different because some of the #defines
238: change, so one must build modules for Xen. As of netbsd-7, the build
239: system does this automatically.
241: The other difference is that XEN3_DOM0 does not have exactly the same
242: options as GENERIC. While it is debatable whether or not this is a
243: bug, users should be aware of this and can simply add missing config
244: items if desired.
246: Finally, there have been occasional reports of trouble with X11
247: servers in NetBSD as a dom0.
249: ## Updating Xen in a dom0
251: Basically, update the xenkernel and xentools packages and copy the new
252: Xen kernel into place, and reboot. This procedure should be usable to
253: update to a new Xen release, but the reader is reminded that having a
254: non-Xen boot methods was recommended earlier.
256: ## Updating NetBSD in a dom0
258: This is just like updating NetBSD on bare hardware, assuming the new
259: version supports the version of Xen you are running. Generally, one
260: replaces the kernel and reboots, and then overlays userland binaries
261: and adjusts `/etc`.
263: Note that one must update both the non-Xen kernel typically used for
264: rescue purposes and the DOM0 kernel used with Xen.
266: ## anita (for testing NetBSD)
268: With a NetBSD dom0, even without any domUs, one should be able to run
269: anita (see pkgsrc/misc/py-anita) to test NetBSD releases, by doing (as
270: root, because anita must create a domU):
272: [[!template id=programlisting text="""
273: anita --vmm=xl test file:///usr/obj/i386/
276: # Unprivileged domains (domU)
278: This section describes general concepts about domUs. It does not
279: address specific domU operating systems or how to install them. The
280: config files for domUs are typically in `/usr/pkg/etc/xen`, and are
281: typically named so that the file name, domU name and the domU's host
282: name match.
284: The domU is provided with CPU and memory by Xen, configured by the
285: dom0. The domU is provided with disk and network by the dom0,
286: mediated by Xen, and configured in the dom0.
288: Entropy in domUs can be an issue; physical disks and network are on
289: the dom0. NetBSD's /dev/random system works, but is often challenged.
291: ## Config files
293: See /usr/pkg/share/examples/xen/xlexample*
294: for a small number of well-commented examples, mostly for running
297: The following is an example minimal domain configuration file. The domU
298: serves as a network file server.
300: [[!template id=filecontent name="/usr/pkg/etc/xen/foo" text="""
301: name = "domU-id"
302: kernel = "/netbsd-XEN3PAE_DOMU-i386-foo.gz"
303: memory = 1024
304: vif = [ 'mac=aa:00:00:d1:00:09,bridge=bridge0' ]
305: disk = [ 'file:/n0/xen/foo-wd0,0x0,w',
306: 'file:/n0/xen/foo-wd1,0x1,w' ]
309: The domain will have name given in the `name` setting. The kernel has the
310: host/domU name in it, so that on the dom0 one can update the various
311: domUs independently. The `vif` line causes an interface to be provided,
312: with a specific mac address (do not reuse MAC addresses!), in bridge
313: mode. Two disks are provided, and they are both writable; the bits
314: are stored in files and Xen attaches them to a vnd(4) device in the
315: dom0 on domain creation. The system treats xbd0 as the boot device
316: without needing explicit configuration.
318: There is not type line; that implicitly defines a pv domU.
320: By convention, domain config files are kept in `/usr/pkg/etc/xen`. Note
321: that "xl create" takes the name of a config file, while other commands
322: take the name of a domain.
324: Examples of commands:
326: [[!template id=programlisting text="""
327: xl create /usr/pkg/etc/xen/foo
328: xl console domU-id
329: xl create -c /usr/pkg/etc/xen/foo
330: xl shutdown domU-id
331: xl list
334: Typing `^]` will exit the console session. Shutting down a domain is
335: equivalent to pushing the power button; a NetBSD domU will receive a
336: power-press event and do a clean shutdown. Shutting down the dom0
337: will trigger controlled shutdowns of all configured domUs.
339: ## CPU and memory
341: A domain is provided with some number of vcpus, up to the number
342: of CPUs seen by the hypervisor. For a domU, it is controlled
343: from the config file by the "vcpus = N" directive.
345: A domain is provided with memory; this is controlled in the config
346: file by "memory = N" (in megabytes). In the straightforward case, the
347: sum of the the memory allocated to the dom0 and all domUs must be less
348: than the available memory.
350: Xen also provides a "balloon" driver, which can be used to let domains
351: use more memory temporarily.
353: ## Virtual disks
355: In domU config files, the disks are defined as a sequence of 3-tuples:
357: * The first element is "method:/path/to/disk". Common methods are
358: "file:" for a file-backed vnd, and "phy:" for something that is already
359: a device, such as an LVM logical volume.
361: * The second element is an artifact of how virtual disks are passed to
362: Linux, and a source of confusion with NetBSD Xen usage. Linux domUs
363: are given a device name to associate with the disk, and values like
364: "hda1" or "sda1" are common. In a NetBSD domU, the first disk appears
365: as xbd0, the second as xbd1, and so on. However, xl demands a
366: second argument. The name given is converted to a major/minor by
367: calling stat(2) on the name in /dev and this is passed to the domU.
368: In the general case, the dom0 and domU can be different operating
369: systems, and it is an unwarranted assumption that they have consistent
370: numbering in /dev, or even that the dom0 OS has a /dev. With NetBSD
371: as both dom0 and domU, using values of 0x0 for the first disk and 0x1
372: for the second works fine and avoids this issue. For a GNU/Linux
373: guest, one can create /dev/hda1 in /dev, or to pass 0x301 for
376: * The third element is "w" for writable disks, and "r" for read-only
380: [[!template id=filecontent name="/usr/pkg/etc/xen/foo" text="""
381: disk = [ 'file:/n0/xen/foo-wd0,0x0,w' ]
384: Note that NetBSD by default creates only vnd. If you need more
385: than 4 total virtual disks at a time, run e.g. "./MAKEDEV vnd4" in the
388: ## Virtual Networking
390: Xen provides virtual Ethernets, each of which connects the dom0 and a
391: domU. For each virtual network, there is an interface "xvifN.M" in
392: the dom0, and a matching interface xennetM (NetBSD name) in domU index N.
393: The interfaces behave as if there is an Ethernet with two
394: adapters connected. From this primitive, one can construct various
395: configurations. We focus on two common and useful cases for which
396: there are existing scripts: bridging and NAT.
398: With bridging (in the example above), the domU perceives itself to be
399: on the same network as the dom0. For server virtualization, this is
400: usually best. Bridging is accomplished by creating a bridge(4) device
401: and adding the dom0's physical interface and the various xvifN.0
402: interfaces to the bridge. One specifies "bridge=bridge0" in the domU
403: config file. The bridge must be set up already in the dom0; an
404: example /etc/ifconfig.bridge0 is:
406: [[!template id=filecontent name="/etc/ifconfig.bridge0" text="""
409: !brconfig bridge0 add wm0
412: With NAT, the domU perceives itself to be behind a NAT running on the
413: dom0. This is often appropriate when running Xen on a workstation.
414: TODO: NAT appears to be configured by "vif = [ '' ]".
416: The MAC address specified is the one used for the interface in the new
417: domain. The interface in dom0 will use this address XOR'd with
418: 00:00:00:01:00:00. Random MAC addresses are assigned if not given.
420: ## Starting domains automatically
422: To start domains `domU-netbsd` and `domU-linux` at boot and shut them
423: down cleanly on dom0 shutdown, add the following in rc.conf:
425: [[!template id=filecontent name="/etc/rc.conf" text="""
426: xendomains="domU-netbsd domU-linux"
429: # domU setup for specific systems
431: Creating domUs is almost entirely independent of operating system. We
432: have already presented the basics of config files in the previous system.
434: Of course, this section presumes that you have a working dom0.
436: ## Creating a NetBSD PV domU
438: See the earlier config file, and adjust memory. Decide on how much
439: storage you will provide, and prepare it (file or LVM).
441: While the kernel will be obtained from the dom0 file system, the same
442: file should be present in the domU as /netbsd so that tools like
443: savecore(8) can work. (This is helpful but not necessary.)
445: The kernel must be specifically built for Xen, to use PV interfacesas
446: a domU. NetBSD release builds provide the following kernels:
448: i386 XEN3PAE_DOMU
449: amd64 XEN3_DOMU
451: This will boot NetBSD, but this is not that useful if the disk is
452: empty. One approach is to unpack sets onto the disk outside of Xen
453: (by mounting it, just as you would prepare a physical disk for a
454: system you can't run the installer on).
456: A second approach is to run an INSTALL kernel, which has a miniroot
457: and can load sets from the network. To do this, copy the INSTALL
458: kernel to / and change the kernel line in the config file to:
460: kernel = "/home/bouyer/netbsd-INSTALL_XEN3_DOMU"
462: Then, start the domain as "xl create -c configfile".
464: Alternatively, if you want to install NetBSD/Xen with a CDROM image, the following
465: line should be used in the config file.
467: disk = [ 'phy:/dev/wd0e,0x1,w', 'phy:/dev/cd0a,0x2,r' ]
469: After booting the domain, the option to install via CDROM may be
470: selected. The CDROM device should be changed to `xbd1d`.
472: Once done installing, "halt -p" the new domain (don't reboot or halt:
473: it would reload the INSTALL_XEN3_DOMU kernel even if you changed the
474: config file), switch the config file back to the XEN3_DOMU kernel,
475: and start the new domain again. Now it should be able to use "root on
476: xbd0a" and you should have a functional NetBSD domU.
478: TODO: check if this is still accurate.
479: When the new domain is booting you'll see some warnings about *wscons*
480: and the pseudo-terminals. These can be fixed by editing the files
481: `/etc/ttys` and `/etc/wscons.conf`. You must disable all terminals in
482: `/etc/ttys`, except *console*, like this:
484: console "/usr/libexec/getty Pc" vt100 on secure
485: ttyE0 "/usr/libexec/getty Pc" vt220 off secure
486: ttyE1 "/usr/libexec/getty Pc" vt220 off secure
487: ttyE2 "/usr/libexec/getty Pc" vt220 off secure
488: ttyE3 "/usr/libexec/getty Pc" vt220 off secure
490: Finally, all screens must be commented out from `/etc/wscons.conf`.
492: It is also desirable to add
496: in rc.conf. This way, the domain will be properly shut down if
497: `xl shutdown -R` or `xl shutdown -H` is used on the dom0.
498: \todo Check the translation to xl.
500: It is not strictly necessary to have a kernel (as /netbsd) in the domU
501: file system. However, various programs (e.g. netstat) will use that
502: kernel to look up symbols to read from kernel virtual memory. If
503: /netbsd is not the running kernel, those lookups will fail. (This is
504: not really a Xen-specific issue, but because the domU kernel is
505: obtained from the dom0, it is far more likely to be out of sync or
506: missing with Xen.)
508: Note that NetBSD by default creates only xbd. If you need more
509: virtual disks in a domU, run e.g. "./MAKEDEV xbd4" in the domU.
511: ## Creating a Linux domU
513: Creating unprivileged Linux domains isn't much different from
514: unprivileged NetBSD domains, but there are some details to know.
516: First, the second parameter passed to the disk declaration (the '0x1' in
517: the example below)
519: disk = [ 'phy:/dev/wd0e,0x1,w' ]
521: does matter to Linux. It wants a Linux device number here (e.g. 0x300
522: for hda). Linux builds device numbers as: (major \<\< 8 + minor).
523: So, hda1 which has major 3 and minor 1 on a Linux system will have
524: device number 0x301. Alternatively, devices names can be used (hda,
525: hdb, ...) as xentools has a table to map these names to devices
526: numbers. To export a partition to a Linux guest we can use:
528: disk = [ 'phy:/dev/wd0e,0x300,w' ]
529: root = "/dev/hda1 ro"
531: and it will appear as /dev/hda on the Linux system, and be used as root
534: To install the Linux system on the partition to be exported to the
535: guest domain, the following method can be used: install
536: sysutils/e2fsprogs from pkgsrc. Use mke2fs to format the partition
537: that will be the root partition of your Linux domain, and mount it.
538: Then copy the files from a working Linux system, make adjustments in
539: `/etc` (fstab, network config). It should also be possible to extract
540: binary packages such as .rpm or .deb directly to the mounted partition
541: using the appropriate tool, possibly running under NetBSD's Linux
542: emulation. Once the file system has been populated, umount it. If
543: desirable, the file system can be converted to ext3 using tune2fs -j.
544: It should now be possible to boot the Linux guest domain, using one of
545: the vmlinuz-\*-xenU kernels available in the Xen binary distribution.
547: To get the Linux console right, you need to add:
549: extra = "xencons=tty1"
551: to your configuration since not all Linux distributions auto-attach a
552: tty to the xen console.
554: ## Creating a NetBSD HVM domU
556: Use type='hmv', probably. Use a GENERIC kernel within the disk image.
558: ## Creating a NetBSD PVH domU
560: Use type='pvh'.
562: \todo Explain where the kernel comes from.
565: ## Creating a Solaris domU
567: See possibly outdated
568: [Solaris domU instructions](/ports/xen/howto-solaris/).
571: ## PCI passthrough: Using PCI devices in guest domains
573: NB: PCI passthrough only works on some Xen versions and as of 2020 it
574: is not clear that it works on any version in pkgsrc. Reports
575: confirming or denying this notion should be sent to port-xen@.
577: The dom0 can give other domains access to selected PCI
578: devices. This can allow, for example, a non-privileged domain to have
579: access to a physical network interface or disk controller. However,
580: keep in mind that giving a domain access to a PCI device most likely
581: will give the domain read/write access to the whole physical memory,
582: as PCs don't have an IOMMU to restrict memory access to DMA-capable
583: device. Also, it's not possible to export ISA devices to non-dom0
584: domains, which means that the primary VGA adapter can't be exported.
585: A guest domain trying to access the VGA registers will panic.
587: If the dom0 is NetBSD, it has to be running Xen 3.1, as support has
588: not been ported to later versions at this time.
590: For a PCI device to be exported to a domU, is has to be attached to
591: the "pciback" driver in dom0. Devices passed to the dom0 via the
592: pciback.hide boot parameter will attach to "pciback" instead of the
593: usual driver. The list of devices is specified as "(bus:dev.func)",
594: where bus and dev are 2-digit hexadecimal numbers, and func a
595: single-digit number:
599: pciback devices should show up in the dom0's boot messages, and the
600: devices should be listed in the `/kern/xen/pci` directory.
602: PCI devices to be exported to a domU are listed in the "pci" array of
603: the domU's config file, with the format "0000:bus:dev.func".
605: pci = [ '0000:00:06.0', '0000:00:0a.0' ]
607: In the domU an "xpci" device will show up, to which one or more pci
608: buses will attach. Then the PCI drivers will attach to PCI buses as
609: usual. Note that the default NetBSD DOMU kernels do not have "xpci"
610: or any PCI drivers built in by default; you have to build your own
611: kernel to use PCI devices in a domU. Here's a kernel config example;
612: note that only the "xpci" lines are unusual.
614: include "arch/i386/conf/XEN3_DOMU"
616: # Add support for PCI buses to the XEN3_DOMU kernel
617: xpci* at xenbus ?
618: pci* at xpci ?
620: # PCI USB controllers
621: uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
623: # USB bus support
624: usb* at uhci?
626: # USB Hubs
627: uhub* at usb?
628: uhub* at uhub? port ? configuration ? interface ?
630: # USB Mass Storage
631: umass* at uhub? port ? configuration ? interface ?
632: wd* at umass?
633: # SCSI controllers
634: ahc* at pci? dev ? function ? # Adaptec 94x, aic78x0 SCSI
636: # SCSI bus support (for both ahc and umass)
637: scsibus* at scsi?
639: # SCSI devices
640: sd* at scsibus? target ? lun ? # SCSI disk drives
641: cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
644: # Miscellaneous Information
646: ## Nesting under Linux KVM
648: It is possible to run a Xen and a NetBSD dom0 under Linux KVM. One
649: can enable virtio in the dom0 for greater speed.
651: ## Other nesting
653: In theory, any full emulation should be able to run Xen and a NetBSD
654: dom0. The HOWTO does not currently have information about Xen XVM
655: mode, nvmm, qemu, Virtualbox, etc.
657: ## NetBSD 5 as domU
659: [NetBSD 5 is known to panic.](http://mail-index.netbsd.org/port-xen/2018/04/17/msg009181.html)
660: (However, NetBSD 5 systems should be updated to a supported version.)
662: # NetBSD as a domU in a VPS
664: The bulk of the HOWTO is about using NetBSD as a dom0 on your own
665: hardware. This section explains how to deal with Xen in a domU as a
666: virtual private server where you do not control or have access to the
667: dom0. This is not intended to be an exhaustive list of VPS providers;
668: only a few are mentioned that specifically support NetBSD.
670: VPS operators provide varying degrees of access and mechanisms for
671: configuration. The big issue is usually how one controls which kernel
672: is booted, because the kernel is nominally in the dom0 file system (to
673: which VPS users do not normally have access). A second issue is how
674: to install NetBSD.
675: A VPS user may want to compile a kernel for security updates, to run
676: npf, run IPsec, or any other reason why someone would want to change
677: their kernel.
679: One approach is to have an administrative interface to upload a kernel,
680: or to select from a prepopulated list. Other approaches are pygrub
681: (deprecated) and pvgrub, which are ways to have a bootloader obtain a
682: kernel from the domU file system. This is closer to a regular physical
683: computer, where someone who controls a machine can replace the kernel.
685: A second issue is multiple CPUs. With NetBSD 6, domUs support
686: multiple vcpus, and it is typical for VPS providers to enable multiple
687: CPUs for NetBSD domUs.
689: ## Complexities due to Xen changes
691: Xen has many security advisories and people running Xen systems make
692: different choices.
694: ### stub domains
696: Some (Linux only?) dom0 systems use something called "stub domains" to
697: isolate qemu from the dom0 system, as a security and reliabilty
698: mechanism when running HVM domUs. Somehow, NetBSD's GENERIC kernel
699: ends up using PIO for disks rather than DMA. Of course, all of this
700: is emulated, but emulated PIO is unusably slow. This problem is not
701: currently understood.
703: ### Grant tables
705: There are multiple versions of using grant tables, and some security
706: advisories have suggested disabling some versions. Some versions of
707: NetBSD apparently only use specific versions and this can lead to
708: "NetBSD current doesn't run on hosting provider X" situations.
710: \todo Explain better.
712: ## Boot methods
714: ### pvgrub
716: pvgrub is a version of grub that uses PV operations instead of BIOS
717: calls. It is booted from the dom0 as the domU kernel, and then reads
718: /grub/menu.lst and loads a kernel from the domU file system.
720: [Panix](http://www.panix.com/) lets users use pvgrub. Panix reports
721: that pvgrub works with FFsv2 with 16K/2K and 32K/4K block/frag sizes
722: (and hence with defaults from "newfs -O 2"). See [Panix's pvgrub
723: page](http://www.panix.com/v-colo/grub.html), which describes only
724: Linux but should be updated to cover NetBSD :-).
726: [prgmr.com](http://prgmr.com/) also lets users with pvgrub to boot
727: their own kernel. See then [prgmr.com NetBSD
729: (which is in need of updating).
731: It appears that [grub's FFS
733: does not support all aspects of modern FFS, but there are also reports
734: that FFSv2 works fine. At prgmr, typically one has an ext2 or FAT
735: partition for the kernel with the intent that grub can understand it,
736: which leads to /netbsd not being the actual kernel. One must remember
737: to update the special boot partition.
739: ### pygrub
741: pygrub runs in the dom0 and looks into the domU file system. This
742: implies that the domU must have a kernel in a file system in a format
743: known to pygrub.
745: pygrub doesn't seem to work to load Linux images under NetBSD dom0,
746: and is inherently less secure than pvgrub due to running inside dom0. For both these
747: reasons, pygrub should not be used, and is only still present so that
748: historical DomU images using it still work.
750: As of 2014, pygrub seems to be of mostly historical
751: interest. New DomUs should use pvgrub.
753: ## Specific Providers
755: ### Amazon
757: See the [Amazon EC2 page](/amazon_ec2/).
CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb