Annotation of wikisrc/ports/xen/howto.mdwn, revision 1.198
1.144 maxv 1: [[!meta title="Xen HowTo"]]
2:
1.157 maxv 3: Xen is a Type 1 hypervisor which supports running multiple guest operating
4: systems on a single physical machine. One uses the Xen kernel to control the
5: CPU, memory and console, a dom0 operating system which mediates access to
6: other hardware (e.g., disks, network, USB), and one or more domU operating
7: systems which operate in an unprivileged virtualized environment. IO requests
8: from the domU systems are forwarded by the Xen hypervisor to the dom0 to be
9: fulfilled.
1.12 gdt 10:
1.182 gdt 11: This HOWTO presumes a basic familiarity with the Xen system
12: architecture, with installing NetBSD on amd64 hardware, and with
13: installing software from pkgsrc. See also the [Xen
14: website](http://www.xenproject.org/).
15:
16: [[!toc]]
17:
1.183 gdt 18: # Overview
1.182 gdt 19:
20: The basic concept of Xen is that the hypervisor (xenkernel) runs on
21: the hardware, and runs a privileged domain ("dom0") that can access
22: disks/networking/etc. One then runs additonal unprivileged domains
23: (each a "domU"), presumably to do something useful.
24:
25: This HOWTO addresses how to run a NetBSD dom0 (and hence also build
26: xen itself). It also addresses how to run domUs in that environment,
27: and how to deal with having a domU in a Xen environment run by someone
28: else and/or not running NetBSD.
29:
1.186 gdt 30: There are many choices one can make; the HOWTO recommends the standard
31: approach and limits discussion of alternatives in many cases.
32:
1.182 gdt 33: ## Guest Styles
34:
35: Xen supports different styles of guests.
1.149 maxv 36:
37: [[!table data="""
38: Style of guest |Supported by NetBSD
1.150 maxv 39: PV |Yes (dom0, domU)
40: HVM |Yes (domU)
1.171 gdt 41: PVHVM |current-only (domU)
1.180 gdt 42: PVH |current-only (domU, dom0 not yet)
1.149 maxv 43: """]]
44:
45: In Para-Virtualized (PV) mode, the guest OS does not attempt to access
46: hardware directly, but instead makes hypercalls to the hypervisor; PV
1.170 gdt 47: guests must be specifically coded for Xen.
1.182 gdt 48: See [PV](https://wiki.xen.org/wiki/Paravirtualization_(PV\)).
1.170 gdt 49:
50: In HVM mode, no guest modification is required; however, hardware
51: support is required, such as VT-x on Intel CPUs and SVM on AMD CPUs.
1.177 gdt 52: The dom0 runs qemu to emulate hardware.
1.170 gdt 53:
1.176 gdt 54: In PVHVM mode, the guest runs as HVM, but additionally can use PV
55: drivers for efficiency.
1.182 gdt 56: See [PV on HVM](https://wiki.xen.org/wiki/PV_on_HVM).
1.170 gdt 57:
1.180 gdt 58: There have been two PVH modes: original PVH and PVHv2. Original PVH
59: was based on PV mode and is no longer relevant at all. PVHv2 is
60: basically lightweight HVM with PV drivers. A critical feature of it
61: is that qemu is not needed; the hypervisor can do the emulation that
62: is required. Thus, a dom0 can be PVHv2.
1.182 gdt 63: The source code uses PVH and config files use pvh; this refers to PVHv2.
64: See [PVH(v2)](https://wiki.xenproject.org/wiki/PVH_(v2\)_Domu).
1.180 gdt 65:
1.182 gdt 66: At system boot, the dom0 kernel is loaded as a module with Xen as the kernel.
1.12 gdt 67: The dom0 can start one or more domUs. (Booting is explained in detail
68: in the dom0 section.)
69:
1.182 gdt 70: ## CPU Architecture
71:
72: Xen runs on x86_64 hardware (the NetBSD amd64 port).
73:
74: There is a concept of Xen running on ARM, but there are no reports of this working with NetBSD.
75:
76: The dom0 system should be amd64. (Instructions for i386PAE dom0 have been removed from the HOWTO.)
1.1 mspo 77:
1.182 gdt 78: The domU can be i386PAE or amd64.
79: i386PAE at one point was considered as [faster](https://lists.xen.org/archives/html/xen-devel/2012-07/msg00085.html) than amd64.
1.150 maxv 80:
1.182 gdt 81: ## Xen Versions
1.15 gdt 82:
1.111 wiz 83: In NetBSD, Xen is provided in pkgsrc, via matching pairs of packages
1.15 gdt 84: xenkernel and xentools. We will refer only to the kernel versions,
85: but note that both packages must be installed together and must have
86: matching versions.
87:
1.145 maxv 88: Versions available in pkgsrc:
1.85 gdt 89:
1.145 maxv 90: [[!table data="""
1.184 gdt 91: Xen Version |Package Name |Xen CPU Support |EOL'ed By Upstream
92: 4.11 |xenkernel411 |x86_64 |No
93: 4.13 |xenkernel413 |x86_64 |No
1.145 maxv 94: """]]
1.113 gdt 95:
1.96 gdt 96: See also the [Xen Security Advisory page](http://xenbits.xen.org/xsa/).
97:
1.166 gdt 98: Older Xen had a python-based management tool called xm, now replaced
1.176 gdt 99: by xl.
1.166 gdt 100:
1.183 gdt 101: ## NetBSD versions
102:
103: Xen has been supported in NetBSD for a long time, at least since 2005.
104: Initially Xen was PV only.
105:
106: NetBSD 8 and up support PV and HVM modes.
107:
108: Support for PVHVM and PVH is available only in NetBSD-current.
109:
1.191 gdt 110: NetBSD up to and including NetBSD 9 as a dom0 does not run SMP,
111: because some drivers are not yet safe for this. NetBSD-current
112: supports SMP in dom0.
1.185 gdt 113:
114: NetBSD, when run as a domU, can and does typically run SMP.
115:
1.191 gdt 116: Note that while Xen 4.13 is current, the kernel support is still
117: called XEN3, because the hypercall interface has not changed
118: significantly.
1.185 gdt 119:
1.187 gdt 120: # Creating a NetBSD dom0
1.15 gdt 121:
1.191 gdt 122: In order to install a NetBSD as a dom0, one first installs a normal
123: NetBSD system, and then pivot the install to a dom0 install by
124: changing the kernel and boot configuration.
1.15 gdt 125:
1.142 gdt 126: In 2018-05, trouble booting a dom0 was reported with 256M of RAM: with
127: 512M it worked reliably. This does not make sense, but if you see
128: "not ELF" after Xen boots, try increasing dom0 RAM.
129:
1.181 gdt 130: ## Installation of NetBSD
1.13 gdt 131:
1.191 gdt 132: [Install NetBSD/amd64](/guide/inst/) just as you would if you were not
133: using Xen. Therefore, use the most recent release, or a build from
134: the most recent stable branch. Alternatively, use -current, being
135: mindful of all the usual caveats of lower stability of current, and
136: likely a bit more so.
1.1 mspo 137:
1.181 gdt 138: ## Installation of Xen
1.1 mspo 139:
1.191 gdt 140: ### Building Xen
141:
1.187 gdt 142: Use the most recent version of Xen in pkgsrc, unless the DESCR says that it is not suitable.
1.186 gdt 143: Therefore, choose 4.13.
144: In the dom0, install xenkernel413 and xentools413 from pkgsrc.
1.155 maxv 145:
1.186 gdt 146: Once this is done, copy the Xen kernel from where pkgsrc puts it to
147: where the boot process will be able to find it:
1.155 maxv 148:
149: [[!template id=programlisting text="""
1.186 gdt 150: # cp -p /usr/pkg/xen413-kernel/xen.gz /
1.155 maxv 151: """]]
152:
1.191 gdt 153: Then, place a NetBSD XEN3_DOM0 kernel in the `/` directory. Such
154: kernel can either be taken from a local release build.sh run, compiled
155: manually, or downloaded from the NetBSD FTP, for example at:
1.159 maxv 156:
157: [[!template id=programlisting text="""
1.186 gdt 158: ftp.netbsd.org/pub/NetBSD/NetBSD-9.1/amd64/binary/kernel/netbsd-XEN3_DOM0.gz
1.159 maxv 159: """]]
1.20 gdt 160:
1.191 gdt 161: ### Configuring booting
162:
1.198 ! gdt 163: Read boot.cfg(8) carefully. Add lines to /boot.cfg to boot Xen,
! 164: adjusting for your root filesystem:
1.20 gdt 165:
1.157 maxv 166: [[!template id=filecontent name="/boot.cfg" text="""
1.198 ! gdt 167: menu=Xen:load /netbsd-XEN3_DOM0.gz root=wd0a console=pc;multiboot /xen.gz dom0_mem=512M
! 168: menu=Xen single user:load /netbsd-XEN3_DOM0.gz root=wd0a console=pc -s;multiboot /xen.gz dom0_mem=512M
1.152 maxv 169: """]]
1.20 gdt 170:
1.159 maxv 171: This specifies that the dom0 should have 512MB of ram, leaving the rest
1.187 gdt 172: to be allocated for domUs.
173:
1.191 gdt 174: NB: This says add, not replace, so that you will be able to more
175: easily boot a NetBSD kernel without Xen. Once Xen boots ok, you may
176: want to set it as default. It is highly likely that you will have
177: trouble at some point, and keeping an up-to-date GENERIC for use in
178: fixing problems is the standard prudent approach.
179:
1.194 gdt 180: \todo Explain why rndseed is not set with Xen as part of the dom0
181: subconfiguration.
182:
1.198 ! gdt 183: Note that you are likely to have to set root= because the boot device
! 184: from /boot is not passed via Xen to the dom0 kernel. With one disk,
! 185: it will work, but e.g. plugging in USB disk to a machine with root on
! 186: wd0a causes boot to fail.
! 187:
1.195 gdt 188: Beware that userconf statements must be attached to the dom0 load, and
189: may not be at top-level, because then they would try to configure the
190: hypervisor, if there is a way to pass them via multiboot . It appears
191: that adding `userconf=pckbc` to `/boot.cfg` causes Xen to crash very
192: early with a heap overflow.
193:
1.191 gdt 194: ### Console selection
195:
196: See boot_console(8). Understand that you should start from a place of
197: having console setup correct for booting GENERIC before trying to
198: configure Xen.
199:
1.193 gdt 200: Generally for GENERIC, one sets the console in bootxx_ffsv1 or
201: equivalent, and this is passed on to /boot (where one typically does
202: not set the console). This configuration of bootxx_ffsv1 should also
203: be in place for Xen systems, to allow seeing messages from /boot and
204: use of a keyboard to select a line from the menu. And, one should
205: have a working boot path to GENERIC for rescue situations.
206:
207: With GENERIC, the boot options are passed on to /netbsd, but there is
208: currently no mechanism to pass these via multiboot to the hypervisor.
209: Thus, in addition to configuring the console in the boot blocks, one
210: must also configure it for Xen.
211:
212: By default, the hypervisor (Xen itself) will use some sort of vga
213: device as the console, much like GENERIC uses by default. The vga
214: console is relinquished at the conclusion of hypervisor boot, before
1.194 gdt 215: the dom0 is started. Xen when using a vga console does not process
216: console input.
1.77 gdt 217:
1.193 gdt 218: The hypervisor can be configured to use a serial port console, e.g.
1.157 maxv 219: [[!template id=filecontent name="/boot.cfg" text="""
1.193 gdt 220: menu=Xen:losad /netbsd-XEN3_DOM0.gz console=com0;multiboot /xen.gz dom0_mem=512M console=com1 com1=9600,8n1
1.152 maxv 221: """]]
1.194 gdt 222: This example uses the first serial port (Xen counts from 1; this is
1.193 gdt 223: what NetBSD would call com0), and sets speed and parity. (The dom0 is
224: then configured to use the same serial port in this example.)
225:
1.194 gdt 226: With the hypervisor configured for a serial console, it can get input,
227: and there is a notion of passing this input to the dom0. \todo
228: Explain why, if Xen has a serial console, the dom0 console is
229: typically also configured to open that same serial port, instead of
230: getting the passthrough input via the xen console.
231:
1.193 gdt 232: One also configures the console for the dom0. While one might expect
233: console=pc to be default, following behavior of GENERIC, a hasty read
234: of the code suggests there is no default and booting without a
235: selected console might lead to a panic. Also, there is merit in
236: explicit configuration. Therefore the standard approach is to place
237: console=pc as part of the load statement for the dom0 kernel, or
238: alternatively console=com0.
239:
240: The NetBSD dom0 kernel will attach xencons(4) (the man page does not
241: exist), but this is not used as a console. It is used to obtain the
242: messages from the hypervisor's console; run `xl dmesg` to see them.
1.191 gdt 243:
244: ### Tuning
245:
1.157 maxv 246: In an attempt to add performance, one can also add `dom0_max_vcpus=1 dom0_vcpus_pin`,
1.37 gdt 247: to force only one vcpu to be provided (since NetBSD dom0 can't use
1.158 maxv 248: more) and to pin that vcpu to a physical CPU. Xen has
1.178 gdt 249: [many boot options](http://xenbits.xenproject.org/docs/4.13-testing/misc/xen-command-line.html),
1.111 wiz 250: and other than dom0 memory and max_vcpus, they are generally not
1.93 gdt 251: necessary.
1.191 gdt 252: \todo Revisit this advice with current.
253: \todo Explain if anyone has ever actually measured that this helps.
254:
255: ### rc.conf
1.93 gdt 256:
1.186 gdt 257: Ensure that the boot scripts installed in
258: `/usr/pkg/share/examples/rc.d` are in `/etc/rc.d`, either because you
259: have `PKG_RCD_SCRIPTS=yes`, or manually. (This is not special to Xen,
260: but a normal part of pkgsrc usage.)
1.159 maxv 261:
1.186 gdt 262: Set `xencommons=YES` in rc.conf:
1.31 gdt 263:
1.157 maxv 264: [[!template id=filecontent name="/etc/rc.conf" text="""
1.152 maxv 265: xencommons=YES
266: """]]
1.31 gdt 267:
1.187 gdt 268: \todo Recommend for/against xen-watchdog.
269:
1.191 gdt 270: ### Testing
271:
1.158 maxv 272: Now, reboot so that you are running a DOM0 kernel under Xen, rather
273: than GENERIC without Xen.
1.157 maxv 274:
1.158 maxv 275: Once the reboot is done, use `xl` to inspect Xen's boot messages,
1.157 maxv 276: available resources, and running domains. For example:
1.34 gdt 277:
1.153 maxv 278: [[!template id=programlisting text="""
279: # xl dmesg
280: ... xen's boot info ...
281: # xl info
282: ... available memory, etc ...
283: # xl list
284: Name Id Mem(MB) CPU State Time(s) Console
285: Domain-0 0 64 0 r---- 58.1
286: """]]
287:
288: Xen logs will be in /var/log/xen.
1.33 gdt 289:
1.88 gdt 290: ### Issues with xencommons
291:
1.157 maxv 292: `xencommons` starts `xenstored`, which stores data on behalf of dom0 and
1.88 gdt 293: domUs. It does not currently work to stop and start xenstored.
294: Certainly all domUs should be shutdown first, following the sort order
295: of the rc.d scripts. However, the dom0 sets up state with xenstored,
296: and is not notified when xenstored exits, leading to not recreating
297: the state when the new xenstored starts. Until there's a mechanism to
298: make this work, one should not expect to be able to restart xenstored
299: (and thus xencommons). There is currently no reason to expect that
300: this will get fixed any time soon.
1.187 gdt 301: \todo Confirm if this is still true in 2020.
1.82 gdt 302:
1.181 gdt 303: ## Xen-specific NetBSD issues
1.40 gdt 304:
305: There are (at least) two additional things different about NetBSD as a
306: dom0 kernel compared to hardware.
307:
1.191 gdt 308: One is that through NetBSD 9 the module ABI is different because some
309: of the #defines change, so there are separate sets of modules in
310: /stand. In NetBSD-current, there is only one set of modules.
1.40 gdt 311:
312: The other difference is that XEN3_DOM0 does not have exactly the same
313: options as GENERIC. While it is debatable whether or not this is a
314: bug, users should be aware of this and can simply add missing config
315: items if desired.
316:
1.187 gdt 317: Finally, there have been occasional reports of trouble with X11
318: servers in NetBSD as a dom0.
319:
320: ## Updating Xen in a dom0
321:
322: Basically, update the xenkernel and xentools packages and copy the new
323: Xen kernel into place, and reboot. This procedure should be usable to
324: update to a new Xen release, but the reader is reminded that having a
325: non-Xen boot methods was recommended earlier.
326:
1.181 gdt 327: ## Updating NetBSD in a dom0
1.15 gdt 328:
329: This is just like updating NetBSD on bare hardware, assuming the new
330: version supports the version of Xen you are running. Generally, one
331: replaces the kernel and reboots, and then overlays userland binaries
1.157 maxv 332: and adjusts `/etc`.
1.15 gdt 333:
1.191 gdt 334: Note that one should update both the non-Xen kernel typically used for
335: rescue purposes, as well as the DOM0 kernel used with Xen.
1.15 gdt 336:
1.187 gdt 337: ## anita (for testing NetBSD)
338:
339: With a NetBSD dom0, even without any domUs, one should be able to run
340: anita (see pkgsrc/misc/py-anita) to test NetBSD releases, by doing (as
341: root, because anita must create a domU):
342:
343: [[!template id=programlisting text="""
344: anita --vmm=xl test file:///usr/obj/i386/
345: """]]
346:
347: # Unprivileged domains (domU)
1.28 gdt 348:
349: This section describes general concepts about domUs. It does not
1.33 gdt 350: address specific domU operating systems or how to install them. The
1.157 maxv 351: config files for domUs are typically in `/usr/pkg/etc/xen`, and are
1.60 wiki 352: typically named so that the file name, domU name and the domU's host
1.33 gdt 353: name match.
354:
1.111 wiz 355: The domU is provided with CPU and memory by Xen, configured by the
1.33 gdt 356: dom0. The domU is provided with disk and network by the dom0,
357: mediated by Xen, and configured in the dom0.
358:
359: Entropy in domUs can be an issue; physical disks and network are on
360: the dom0. NetBSD's /dev/random system works, but is often challenged.
361:
1.181 gdt 362: ## Config files
1.48 gdt 363:
1.165 gson 364: See /usr/pkg/share/examples/xen/xlexample*
1.164 gson 365: for a small number of well-commented examples, mostly for running
1.48 gdt 366: GNU/Linux.
367:
1.157 maxv 368: The following is an example minimal domain configuration file. The domU
369: serves as a network file server.
370:
371: [[!template id=filecontent name="/usr/pkg/etc/xen/foo" text="""
372: name = "domU-id"
373: kernel = "/netbsd-XEN3PAE_DOMU-i386-foo.gz"
374: memory = 1024
375: vif = [ 'mac=aa:00:00:d1:00:09,bridge=bridge0' ]
376: disk = [ 'file:/n0/xen/foo-wd0,0x0,w',
377: 'file:/n0/xen/foo-wd1,0x1,w' ]
378: """]]
1.48 gdt 379:
1.157 maxv 380: The domain will have name given in the `name` setting. The kernel has the
1.48 gdt 381: host/domU name in it, so that on the dom0 one can update the various
1.157 maxv 382: domUs independently. The `vif` line causes an interface to be provided,
1.48 gdt 383: with a specific mac address (do not reuse MAC addresses!), in bridge
384: mode. Two disks are provided, and they are both writable; the bits
385: are stored in files and Xen attaches them to a vnd(4) device in the
1.111 wiz 386: dom0 on domain creation. The system treats xbd0 as the boot device
1.48 gdt 387: without needing explicit configuration.
388:
1.187 gdt 389: There is not type line; that implicitly defines a pv domU.
390:
1.163 gson 391: By convention, domain config files are kept in `/usr/pkg/etc/xen`. Note
1.157 maxv 392: that "xl create" takes the name of a config file, while other commands
393: take the name of a domain.
394:
395: Examples of commands:
1.48 gdt 396:
1.157 maxv 397: [[!template id=programlisting text="""
1.163 gson 398: xl create /usr/pkg/etc/xen/foo
399: xl console domU-id
400: xl create -c /usr/pkg/etc/xen/foo
401: xl shutdown domU-id
1.157 maxv 402: xl list
403: """]]
404:
405: Typing `^]` will exit the console session. Shutting down a domain is
1.48 gdt 406: equivalent to pushing the power button; a NetBSD domU will receive a
407: power-press event and do a clean shutdown. Shutting down the dom0
408: will trigger controlled shutdowns of all configured domUs.
409:
1.181 gdt 410: ## CPU and memory
1.33 gdt 411:
1.169 plunky 412: A domain is provided with some number of vcpus, up to the number
1.157 maxv 413: of CPUs seen by the hypervisor. For a domU, it is controlled
1.48 gdt 414: from the config file by the "vcpus = N" directive.
415:
416: A domain is provided with memory; this is controlled in the config
417: file by "memory = N" (in megabytes). In the straightforward case, the
418: sum of the the memory allocated to the dom0 and all domUs must be less
1.33 gdt 419: than the available memory.
420:
1.197 gdt 421: ## Balloon driver
422:
423: Xen provides a `balloon` driver, which can be used to let domains use
424: more memory temporarily.
425:
426: \todo Explain how to set up a aystem to use the balloon scheme in a
427: useful manner.
1.28 gdt 428:
1.181 gdt 429: ## Virtual disks
1.28 gdt 430:
1.158 maxv 431: In domU config files, the disks are defined as a sequence of 3-tuples:
432:
433: * The first element is "method:/path/to/disk". Common methods are
1.162 gutterid 434: "file:" for a file-backed vnd, and "phy:" for something that is already
435: a device, such as an LVM logical volume.
1.158 maxv 436:
437: * The second element is an artifact of how virtual disks are passed to
438: Linux, and a source of confusion with NetBSD Xen usage. Linux domUs
439: are given a device name to associate with the disk, and values like
440: "hda1" or "sda1" are common. In a NetBSD domU, the first disk appears
441: as xbd0, the second as xbd1, and so on. However, xl demands a
442: second argument. The name given is converted to a major/minor by
443: calling stat(2) on the name in /dev and this is passed to the domU.
444: In the general case, the dom0 and domU can be different operating
445: systems, and it is an unwarranted assumption that they have consistent
446: numbering in /dev, or even that the dom0 OS has a /dev. With NetBSD
447: as both dom0 and domU, using values of 0x0 for the first disk and 0x1
448: for the second works fine and avoids this issue. For a GNU/Linux
449: guest, one can create /dev/hda1 in /dev, or to pass 0x301 for
450: /dev/hda1.
1.48 gdt 451:
1.158 maxv 452: * The third element is "w" for writable disks, and "r" for read-only
453: disks.
454:
455: Example:
456: [[!template id=filecontent name="/usr/pkg/etc/xen/foo" text="""
457: disk = [ 'file:/n0/xen/foo-wd0,0x0,w' ]
458: """]]
1.28 gdt 459:
1.127 gdt 460: Note that NetBSD by default creates only vnd[0123]. If you need more
461: than 4 total virtual disks at a time, run e.g. "./MAKEDEV vnd4" in the
462: dom0.
463:
1.187 gdt 464: ## Virtual Networking
1.28 gdt 465:
1.111 wiz 466: Xen provides virtual Ethernets, each of which connects the dom0 and a
1.46 gdt 467: domU. For each virtual network, there is an interface "xvifN.M" in
1.158 maxv 468: the dom0, and a matching interface xennetM (NetBSD name) in domU index N.
469: The interfaces behave as if there is an Ethernet with two
1.111 wiz 470: adapters connected. From this primitive, one can construct various
1.46 gdt 471: configurations. We focus on two common and useful cases for which
472: there are existing scripts: bridging and NAT.
1.28 gdt 473:
1.48 gdt 474: With bridging (in the example above), the domU perceives itself to be
475: on the same network as the dom0. For server virtualization, this is
476: usually best. Bridging is accomplished by creating a bridge(4) device
477: and adding the dom0's physical interface and the various xvifN.0
478: interfaces to the bridge. One specifies "bridge=bridge0" in the domU
479: config file. The bridge must be set up already in the dom0; an
480: example /etc/ifconfig.bridge0 is:
1.46 gdt 481:
1.157 maxv 482: [[!template id=filecontent name="/etc/ifconfig.bridge0" text="""
483: create
484: up
485: !brconfig bridge0 add wm0
486: """]]
1.28 gdt 487:
488: With NAT, the domU perceives itself to be behind a NAT running on the
489: dom0. This is often appropriate when running Xen on a workstation.
1.48 gdt 490: TODO: NAT appears to be configured by "vif = [ '' ]".
1.28 gdt 491:
1.49 gdt 492: The MAC address specified is the one used for the interface in the new
1.53 gdt 493: domain. The interface in dom0 will use this address XOR'd with
1.49 gdt 494: 00:00:00:01:00:00. Random MAC addresses are assigned if not given.
495:
1.187 gdt 496: ## Starting domains automatically
1.28 gdt 497:
1.158 maxv 498: To start domains `domU-netbsd` and `domU-linux` at boot and shut them
499: down cleanly on dom0 shutdown, add the following in rc.conf:
1.28 gdt 500:
1.158 maxv 501: [[!template id=filecontent name="/etc/rc.conf" text="""
502: xendomains="domU-netbsd domU-linux"
503: """]]
1.28 gdt 504:
1.188 gdt 505: # domU setup for specific systems
1.14 gdt 506:
507: Creating domUs is almost entirely independent of operating system. We
1.188 gdt 508: have already presented the basics of config files in the previous system.
509:
510: Of course, this section presumes that you have a working dom0.
1.14 gdt 511:
1.187 gdt 512: ## Creating a NetBSD PV domU
513:
1.49 gdt 514: See the earlier config file, and adjust memory. Decide on how much
1.162 gutterid 515: storage you will provide, and prepare it (file or LVM).
1.49 gdt 516:
1.111 wiz 517: While the kernel will be obtained from the dom0 file system, the same
1.49 gdt 518: file should be present in the domU as /netbsd so that tools like
519: savecore(8) can work. (This is helpful but not necessary.)
520:
1.188 gdt 521: The kernel must be specifically built for Xen, to use PV interfacesas
522: a domU. NetBSD release builds provide the following kernels:
1.49 gdt 523:
524: i386 XEN3PAE_DOMU
1.95 gdt 525: amd64 XEN3_DOMU
1.5 mspo 526:
1.49 gdt 527: This will boot NetBSD, but this is not that useful if the disk is
1.188 gdt 528: empty. One approach is to unpack sets onto the disk outside of Xen
1.49 gdt 529: (by mounting it, just as you would prepare a physical disk for a
530: system you can't run the installer on).
531:
532: A second approach is to run an INSTALL kernel, which has a miniroot
533: and can load sets from the network. To do this, copy the INSTALL
534: kernel to / and change the kernel line in the config file to:
1.5 mspo 535:
1.49 gdt 536: kernel = "/home/bouyer/netbsd-INSTALL_XEN3_DOMU"
1.5 mspo 537:
1.163 gson 538: Then, start the domain as "xl create -c configfile".
1.1 mspo 539:
1.49 gdt 540: Alternatively, if you want to install NetBSD/Xen with a CDROM image, the following
541: line should be used in the config file.
1.1 mspo 542:
1.3 mspo 543: disk = [ 'phy:/dev/wd0e,0x1,w', 'phy:/dev/cd0a,0x2,r' ]
1.1 mspo 544:
545: After booting the domain, the option to install via CDROM may be
1.49 gdt 546: selected. The CDROM device should be changed to `xbd1d`.
1.1 mspo 547:
1.188 gdt 548: Once done installing, "halt -p" the new domain (don't reboot or halt:
1.49 gdt 549: it would reload the INSTALL_XEN3_DOMU kernel even if you changed the
550: config file), switch the config file back to the XEN3_DOMU kernel,
551: and start the new domain again. Now it should be able to use "root on
1.188 gdt 552: xbd0a" and you should have a functional NetBSD domU.
1.1 mspo 553:
1.49 gdt 554: TODO: check if this is still accurate.
1.1 mspo 555: When the new domain is booting you'll see some warnings about *wscons*
556: and the pseudo-terminals. These can be fixed by editing the files
1.5 mspo 557: `/etc/ttys` and `/etc/wscons.conf`. You must disable all terminals in
558: `/etc/ttys`, except *console*, like this:
1.1 mspo 559:
1.3 mspo 560: console "/usr/libexec/getty Pc" vt100 on secure
561: ttyE0 "/usr/libexec/getty Pc" vt220 off secure
562: ttyE1 "/usr/libexec/getty Pc" vt220 off secure
563: ttyE2 "/usr/libexec/getty Pc" vt220 off secure
564: ttyE3 "/usr/libexec/getty Pc" vt220 off secure
1.1 mspo 565:
1.5 mspo 566: Finally, all screens must be commented out from `/etc/wscons.conf`.
1.1 mspo 567:
1.192 gdt 568: One should also run `powerd` in a domU, but this should not need
569: configuring. With powerd, the domain will run a controlled shutdown
570: if `xl shutdown -R` or `xl shutdown -H` is used on the dom0, via
571: receiving a synthetic `power button pressed` signal. In 9 and
572: current, `powerd` is run by default under Xen kernels (or if ACPI is
573: present), and it can be added to rc.conf if not.
1.1 mspo 574:
1.92 gdt 575: It is not strictly necessary to have a kernel (as /netbsd) in the domU
1.111 wiz 576: file system. However, various programs (e.g. netstat) will use that
1.92 gdt 577: kernel to look up symbols to read from kernel virtual memory. If
578: /netbsd is not the running kernel, those lookups will fail. (This is
579: not really a Xen-specific issue, but because the domU kernel is
580: obtained from the dom0, it is far more likely to be out of sync or
581: missing with Xen.)
582:
1.187 gdt 583: Note that NetBSD by default creates only xbd[0123]. If you need more
584: virtual disks in a domU, run e.g. "./MAKEDEV xbd4" in the domU.
585:
1.196 gdt 586: ## Creating a Linux PV domU
1.1 mspo 587:
588: Creating unprivileged Linux domains isn't much different from
589: unprivileged NetBSD domains, but there are some details to know.
590:
591: First, the second parameter passed to the disk declaration (the '0x1' in
592: the example below)
593:
1.3 mspo 594: disk = [ 'phy:/dev/wd0e,0x1,w' ]
1.1 mspo 595:
596: does matter to Linux. It wants a Linux device number here (e.g. 0x300
1.49 gdt 597: for hda). Linux builds device numbers as: (major \<\< 8 + minor).
598: So, hda1 which has major 3 and minor 1 on a Linux system will have
599: device number 0x301. Alternatively, devices names can be used (hda,
600: hdb, ...) as xentools has a table to map these names to devices
601: numbers. To export a partition to a Linux guest we can use:
1.1 mspo 602:
1.49 gdt 603: disk = [ 'phy:/dev/wd0e,0x300,w' ]
604: root = "/dev/hda1 ro"
1.1 mspo 605:
606: and it will appear as /dev/hda on the Linux system, and be used as root
607: partition.
608:
1.49 gdt 609: To install the Linux system on the partition to be exported to the
610: guest domain, the following method can be used: install
611: sysutils/e2fsprogs from pkgsrc. Use mke2fs to format the partition
612: that will be the root partition of your Linux domain, and mount it.
613: Then copy the files from a working Linux system, make adjustments in
614: `/etc` (fstab, network config). It should also be possible to extract
615: binary packages such as .rpm or .deb directly to the mounted partition
616: using the appropriate tool, possibly running under NetBSD's Linux
1.111 wiz 617: emulation. Once the file system has been populated, umount it. If
618: desirable, the file system can be converted to ext3 using tune2fs -j.
1.49 gdt 619: It should now be possible to boot the Linux guest domain, using one of
620: the vmlinuz-\*-xenU kernels available in the Xen binary distribution.
1.1 mspo 621:
1.111 wiz 622: To get the Linux console right, you need to add:
1.1 mspo 623:
1.3 mspo 624: extra = "xencons=tty1"
1.1 mspo 625:
1.111 wiz 626: to your configuration since not all Linux distributions auto-attach a
1.1 mspo 627: tty to the xen console.
628:
1.180 gdt 629: ## Creating a NetBSD HVM domU
630:
1.196 gdt 631: Use type='hvm', probably. Use a GENERIC kernel within the disk image.
1.180 gdt 632:
633: ## Creating a NetBSD PVH domU
634:
1.196 gdt 635: This only works with a current kernel in the domU.
1.180 gdt 636:
1.196 gdt 637: Use type='pvh'. Probably, use a GENERIC kernel within the disk image,
638: which in current has PV support.
639:
640: \todo Verify.
641:
642: \todo Verify if one can have current PVH domU on a 9 dom0.
1.180 gdt 643:
1.187 gdt 644: ## Creating a Solaris domU
1.1 mspo 645:
1.50 gdt 646: See possibly outdated
647: [Solaris domU instructions](/ports/xen/howto-solaris/).
1.5 mspo 648:
1.187 gdt 649: ## PCI passthrough: Using PCI devices in guest domains
1.1 mspo 650:
1.180 gdt 651: NB: PCI passthrough only works on some Xen versions and as of 2020 it
1.196 gdt 652: is not clear that it works on any version in pkgsrc. \todo Reports
1.180 gdt 653: confirming or denying this notion should be sent to port-xen@.
654:
1.53 gdt 655: The dom0 can give other domains access to selected PCI
1.52 gdt 656: devices. This can allow, for example, a non-privileged domain to have
657: access to a physical network interface or disk controller. However,
658: keep in mind that giving a domain access to a PCI device most likely
659: will give the domain read/write access to the whole physical memory,
660: as PCs don't have an IOMMU to restrict memory access to DMA-capable
1.53 gdt 661: device. Also, it's not possible to export ISA devices to non-dom0
1.52 gdt 662: domains, which means that the primary VGA adapter can't be exported.
663: A guest domain trying to access the VGA registers will panic.
664:
1.53 gdt 665: If the dom0 is NetBSD, it has to be running Xen 3.1, as support has
1.52 gdt 666: not been ported to later versions at this time.
667:
668: For a PCI device to be exported to a domU, is has to be attached to
669: the "pciback" driver in dom0. Devices passed to the dom0 via the
670: pciback.hide boot parameter will attach to "pciback" instead of the
671: usual driver. The list of devices is specified as "(bus:dev.func)",
1.5 mspo 672: where bus and dev are 2-digit hexadecimal numbers, and func a
673: single-digit number:
1.1 mspo 674:
1.52 gdt 675: pciback.hide=(00:0a.0)(00:06.0)
1.1 mspo 676:
1.52 gdt 677: pciback devices should show up in the dom0's boot messages, and the
1.5 mspo 678: devices should be listed in the `/kern/xen/pci` directory.
1.1 mspo 679:
1.52 gdt 680: PCI devices to be exported to a domU are listed in the "pci" array of
681: the domU's config file, with the format "0000:bus:dev.func".
1.1 mspo 682:
1.52 gdt 683: pci = [ '0000:00:06.0', '0000:00:0a.0' ]
1.1 mspo 684:
1.52 gdt 685: In the domU an "xpci" device will show up, to which one or more pci
1.111 wiz 686: buses will attach. Then the PCI drivers will attach to PCI buses as
1.52 gdt 687: usual. Note that the default NetBSD DOMU kernels do not have "xpci"
688: or any PCI drivers built in by default; you have to build your own
689: kernel to use PCI devices in a domU. Here's a kernel config example;
690: note that only the "xpci" lines are unusual.
691:
692: include "arch/i386/conf/XEN3_DOMU"
693:
1.111 wiz 694: # Add support for PCI buses to the XEN3_DOMU kernel
1.52 gdt 695: xpci* at xenbus ?
696: pci* at xpci ?
697:
698: # PCI USB controllers
699: uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
700:
701: # USB bus support
702: usb* at uhci?
703:
704: # USB Hubs
705: uhub* at usb?
706: uhub* at uhub? port ? configuration ? interface ?
707:
708: # USB Mass Storage
709: umass* at uhub? port ? configuration ? interface ?
710: wd* at umass?
711: # SCSI controllers
712: ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
713:
714: # SCSI bus support (for both ahc and umass)
715: scsibus* at scsi?
716:
717: # SCSI devices
718: sd* at scsibus? target ? lun ? # SCSI disk drives
719: cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
1.1 mspo 720:
721:
1.189 gdt 722: # Miscellaneous Information
1.173 gdt 723:
1.189 gdt 724: ## Nesting under Linux KVM
725:
726: It is possible to run a Xen and a NetBSD dom0 under Linux KVM. One
727: can enable virtio in the dom0 for greater speed.
728:
729: ## Other nesting
730:
731: In theory, any full emulation should be able to run Xen and a NetBSD
732: dom0. The HOWTO does not currently have information about Xen XVM
733: mode, nvmm, qemu, Virtualbox, etc.
734:
735: ## NetBSD 5 as domU
1.173 gdt 736:
1.176 gdt 737: [NetBSD 5 is known to panic.](http://mail-index.netbsd.org/port-xen/2018/04/17/msg009181.html)
1.175 gdt 738: (However, NetBSD 5 systems should be updated to a supported version.)
1.173 gdt 739:
740: # NetBSD as a domU in a VPS
1.28 gdt 741:
742: The bulk of the HOWTO is about using NetBSD as a dom0 on your own
743: hardware. This section explains how to deal with Xen in a domU as a
744: virtual private server where you do not control or have access to the
1.70 gdt 745: dom0. This is not intended to be an exhaustive list of VPS providers;
746: only a few are mentioned that specifically support NetBSD.
1.28 gdt 747:
1.52 gdt 748: VPS operators provide varying degrees of access and mechanisms for
749: configuration. The big issue is usually how one controls which kernel
1.111 wiz 750: is booted, because the kernel is nominally in the dom0 file system (to
751: which VPS users do not normally have access). A second issue is how
1.70 gdt 752: to install NetBSD.
1.52 gdt 753: A VPS user may want to compile a kernel for security updates, to run
754: npf, run IPsec, or any other reason why someone would want to change
755: their kernel.
756:
1.111 wiz 757: One approach is to have an administrative interface to upload a kernel,
1.68 gdt 758: or to select from a prepopulated list. Other approaches are pygrub
1.59 gdt 759: (deprecated) and pvgrub, which are ways to have a bootloader obtain a
1.111 wiz 760: kernel from the domU file system. This is closer to a regular physical
1.59 gdt 761: computer, where someone who controls a machine can replace the kernel.
1.52 gdt 762:
1.74 gdt 763: A second issue is multiple CPUs. With NetBSD 6, domUs support
764: multiple vcpus, and it is typical for VPS providers to enable multiple
765: CPUs for NetBSD domUs.
766:
1.180 gdt 767: ## Complexities due to Xen changes
768:
769: Xen has many security advisories and people running Xen systems make
770: different choices.
771:
772: ### stub domains
773:
774: Some (Linux only?) dom0 systems use something called "stub domains" to
775: isolate qemu from the dom0 system, as a security and reliabilty
776: mechanism when running HVM domUs. Somehow, NetBSD's GENERIC kernel
777: ends up using PIO for disks rather than DMA. Of course, all of this
778: is emulated, but emulated PIO is unusably slow. This problem is not
779: currently understood.
780:
781: ### Grant tables
782:
783: There are multiple versions of using grant tables, and some security
784: advisories have suggested disabling some versions. Some versions of
785: NetBSD apparently only use specific versions and this can lead to
786: "NetBSD current doesn't run on hosting provider X" situations.
787:
788: \todo Explain better.
789:
1.181 gdt 790: ## Boot methods
791:
792: ### pvgrub
1.59 gdt 793:
794: pvgrub is a version of grub that uses PV operations instead of BIOS
795: calls. It is booted from the dom0 as the domU kernel, and then reads
1.111 wiz 796: /grub/menu.lst and loads a kernel from the domU file system.
1.59 gdt 797:
1.70 gdt 798: [Panix](http://www.panix.com/) lets users use pvgrub. Panix reports
1.71 gdt 799: that pvgrub works with FFsv2 with 16K/2K and 32K/4K block/frag sizes
800: (and hence with defaults from "newfs -O 2"). See [Panix's pvgrub
1.70 gdt 801: page](http://www.panix.com/v-colo/grub.html), which describes only
1.74 gdt 802: Linux but should be updated to cover NetBSD :-).
1.70 gdt 803:
804: [prgmr.com](http://prgmr.com/) also lets users with pvgrub to boot
805: their own kernel. See then [prgmr.com NetBSD
1.74 gdt 806: HOWTO](http://wiki.prgmr.com/mediawiki/index.php/NetBSD_as_a_DomU)
807: (which is in need of updating).
1.59 gdt 808:
1.70 gdt 809: It appears that [grub's FFS
810: code](http://xenbits.xensource.com/hg/xen-unstable.hg/file/bca284f67702/tools/libfsimage/ufs/fsys_ufs.c)
811: does not support all aspects of modern FFS, but there are also reports
1.72 gdt 812: that FFSv2 works fine. At prgmr, typically one has an ext2 or FAT
1.70 gdt 813: partition for the kernel with the intent that grub can understand it,
814: which leads to /netbsd not being the actual kernel. One must remember
1.111 wiz 815: to update the special boot partition.
1.59 gdt 816:
1.181 gdt 817: ### pygrub
1.168 wiki 818:
819: pygrub runs in the dom0 and looks into the domU file system. This
820: implies that the domU must have a kernel in a file system in a format
821: known to pygrub.
822:
823: pygrub doesn't seem to work to load Linux images under NetBSD dom0,
824: and is inherently less secure than pvgrub due to running inside dom0. For both these
825: reasons, pygrub should not be used, and is only still present so that
826: historical DomU images using it still work.
827:
828: As of 2014, pygrub seems to be of mostly historical
829: interest. New DomUs should use pvgrub.
830:
1.181 gdt 831: ## Specific Providers
832:
833: ### Amazon
1.59 gdt 834:
1.143 wiki 835: See the [Amazon EC2 page](/amazon_ec2/).
CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb
![[BACK]](/icons/back.gif){kind=icon}
Return to howto.mdwn CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [NetBSD Developer Wiki] / wikisrc / ports / xen