Annotation of wikisrc/ports/xen/howto.mdwn, revision 1.151
1.144 maxv 1: [[!meta title="Xen HowTo"]]
2:
1.5 mspo 3: Introduction
1.13 gdt 4: ============
1.1 mspo 5:
6: [![[Xen
1.140 khorben 7: screenshot]](https://www.netbsd.org/gallery/in-Action/hubertf-xens.png)](https://www.netbsd.org/gallery/in-Action/hubertf-xen.png)
1.1 mspo 8:
1.149 maxv 9: Xen is a hypervisor for x86 hardware, which supports running multiple guest
1.58 gdt 10: operating systems on a single physical machine. Xen is a Type 1 or
11: bare-metal hypervisor; one uses the Xen kernel to control the CPU,
12: memory and console, a dom0 operating system which mediates access to
13: other hardware (e.g., disks, network, USB), and one or more domU
14: operating systems which operate in an unprivileged virtualized
15: environment. IO requests from the domU systems are forwarded by the
1.149 maxv 16: Xen hypervisor to the dom0 to be fulfilled.
1.12 gdt 17:
1.149 maxv 18: Xen supports different styles of guest:
19:
20: [[!table data="""
21: Style of guest |Supported by NetBSD
1.150 maxv 22: PV |Yes (dom0, domU)
23: HVM |Yes (domU)
1.149 maxv 24: PVHVM |No
25: PVH |No
26: """]]
27:
28: In Para-Virtualized (PV) mode, the guest OS does not attempt to access
29: hardware directly, but instead makes hypercalls to the hypervisor; PV
30: guests must be specifically coded for Xen. In HVM mode, no guest
31: modification is required; however, hardware support is required, such
32: as VT-x on Intel CPUs and SVM on AMD CPUs.
33:
34: There are further features for IOMMU virtualization, Intel's VT-d and
35: AMD's AMD-Vi. TODO: Explain whether Xen on NetBSD makes use of these
36: features. TODO: Review by someone who really understands this.
1.12 gdt 37:
1.27 jnemeth 38: At boot, the dom0 kernel is loaded as a module with Xen as the kernel.
1.12 gdt 39: The dom0 can start one or more domUs. (Booting is explained in detail
40: in the dom0 section.)
41:
42: This HOWTO presumes a basic familiarity with the Xen system
1.123 gdt 43: architecture, with installing NetBSD on i386/amd64 hardware, and with
44: installing software from pkgsrc. See also the [Xen
45: website](http://www.xenproject.org/).
1.1 mspo 46:
1.150 maxv 47: This HOWTO attempts to address both the case of running a NetBSD dom0
48: on hardware and running domUs under it (NetBSD and other), and also
49: running NetBSD as a domU in a VPS.
50:
1.15 gdt 51: Versions of Xen and NetBSD
52: ==========================
53:
1.27 jnemeth 54: Most of the installation concepts and instructions are independent
55: of Xen version and NetBSD version. This section gives advice on
56: which version to choose. Versions not in pkgsrc and older unsupported
57: versions of NetBSD are intentionally ignored.
1.15 gdt 58:
1.133 gdt 59: The term "amd64" is used to refer to both the NetBSD port and to the
1.150 maxv 60: hardware architecture on which it runs. Such hardware is generally
61: made by both Intel and AMD, and common on PC computers.
1.133 gdt 62:
1.146 maxv 63: Xen versions
64: ------------
1.15 gdt 65:
1.111 wiz 66: In NetBSD, Xen is provided in pkgsrc, via matching pairs of packages
1.15 gdt 67: xenkernel and xentools. We will refer only to the kernel versions,
68: but note that both packages must be installed together and must have
69: matching versions.
70:
1.145 maxv 71: Versions available in pkgsrc:
1.85 gdt 72:
1.145 maxv 73: [[!table data="""
74: Xen Version |Package Name |Xen CPU Support |EOL'ed By Upstream
75: 4.2 |xenkernel42 |32bit, 64bit |Yes
76: 4.5 |xenkernel45 |64bit |Yes
77: 4.6 |xenkernel46 |64bit |Partially
78: 4.8 |xenkernel48 |64bit |No
79: 4.11 |xenkernel411 |64bit |No
80: """]]
1.113 gdt 81:
1.96 gdt 82: See also the [Xen Security Advisory page](http://xenbits.xen.org/xsa/).
83:
1.145 maxv 84: Note: Xen 4.2 was the last version to support 32bit CPUs.
85:
1.19 gdt 86: Xen command program
87: -------------------
88:
1.79 gdt 89: Early Xen used a program called xm to manipulate the system from the
1.19 gdt 90: dom0. Starting in 4.1, a replacement program with similar behavior
1.79 gdt 91: called xl is provided, but it does not work well in 4.1. In 4.2, both
1.127 gdt 92: xm and xl work fine. 4.4 is the last version that has xm.
93:
94: You must make a global choice to use xm or xl, because it affects not
95: only which command you use, but the command used by rc.d scripts
96: (specifically xendomains) and which daemons should be run. The
1.146 maxv 97: xentools packages provide xl for 4.2 and up.
1.127 gdt 98:
99: In 4.2, you can choose to use xm by simply changing the ctl_command
1.135 gdt 100: variable and setting xend=YES in rc.conf.
1.127 gdt 101:
102: With xl, virtual devices are configured in parallel, which can cause
103: problems if they are written assuming serial operation (e.g., updating
1.130 gdt 104: firewall rules without explicit locking). There is now locking for
105: the provided scripts, which works for normal casses (e.g, file-backed
106: xbd, where a vnd must be allocated). But, as of 201612, it has not
107: been adequately tested for a complex custom setup with a large number
108: of interfaces.
1.19 gdt 109:
1.147 maxv 110: NetBSD versions
111: ---------------
1.15 gdt 112:
1.142 gdt 113: The netbsd-7, netbsd-8, and -current branches are all reasonable
1.105 gdt 114: choices, with more or less the same considerations for non-Xen use.
1.147 maxv 115: NetBSD 8 is recommended as the stable version of the most recent
116: release for production use.
1.146 maxv 117:
118: For developing Xen, netbsd-current may be appropriate.
1.15 gdt 119:
120: As of NetBSD 6, a NetBSD domU will support multiple vcpus. There is
121: no SMP support for NetBSD as dom0. (The dom0 itself doesn't really
1.105 gdt 122: need SMP for dom0 functions; the lack of support is really a problem
123: when using a dom0 as a normal computer.)
1.15 gdt 124:
1.147 maxv 125: Note: NetBSD support is called XEN3. However, it does support Xen 4,
126: because the hypercall interface has remained identical.
127:
1.18 gdt 128: Architecture
129: ------------
130:
1.133 gdt 131: Xen itself can run on i386 (Xen < 4.2) or amd64 hardware (all Xen
1.151 ! maxv 132: versions). Practically, almost any computer where one would want to
! 133: run Xen today supports amd64.
1.99 gdt 134:
1.133 gdt 135: Xen, the dom0 system, and each domU system can be either i386 or
136: amd64. When building a xenkernel package, one obtains an i386 Xen
1.134 wiz 137: kernel on an i386 host, and an amd64 Xen kernel on an amd64 host. If
1.133 gdt 138: the Xen kernel is i386, then the dom0 kernel and all domU kernels must
139: be i386. With an amd64 Xen kernel, an amd64 dom0 kernel is known to
140: work, and an i386 dom0 kernel should in theory work. An amd64
141: Xen/dom0 is known to support both i386 and amd64 domUs.
142:
1.151 ! maxv 143: i386 dom0 and domU kernels must be PAE. PAE kernels are included in
! 144: the NetBSD default build.
1.135 gdt 145:
146: Because of the above, the standard approach is to use an amd64 Xen
147: kernel and NetBSD/amd64 for the dom0. For domUs, NetBSD/i386 (with
148: the PAE kernel) and NetBSD/amd64 are in widespread use, and there is
149: little to no Xen-specific reason to prefer one over the other.
1.133 gdt 150:
151: Note that to use an i386 dom0 with Xen 4.5 or higher, one must build
1.135 gdt 152: (or obtain from pre-built packages) an amd64 Xen kernel and install
153: that on the system. (One must also use a PAE i386 kernel, but this is
154: also required with an i386 Xen kernel.). Almost no one in the
155: NetBSD/Xen community does this, and the standard, well-tested,
156: approach is to use an amd64 dom0.
157:
158: A [posting on
159: xen-devel](https://lists.xen.org/archives/html/xen-devel/2012-07/msg00085.html)
160: explained that PV system call overhead was higher on amd64, and thus
161: there is some notion that i386 guests are faster. It goes on to
162: caution that the total situation is complex and not entirely
163: understood. On top of that caution, the post is about Linux, not
164: NetBSD. TODO: Include link to benchmarks, if someone posts them.
1.29 gdt 165:
1.15 gdt 166: NetBSD as a dom0
167: ================
168:
169: NetBSD can be used as a dom0 and works very well. The following
170: sections address installation, updating NetBSD, and updating Xen.
1.19 gdt 171: Note that it doesn't make sense to talk about installing a dom0 OS
172: without also installing Xen itself. We first address installing
173: NetBSD, which is not yet a dom0, and then adding Xen, pivoting the
174: NetBSD install to a dom0 install by just changing the kernel and boot
175: configuration.
1.15 gdt 176:
1.45 gdt 177: For experimenting with Xen, a machine with as little as 1G of RAM and
178: 100G of disk can work. For running many domUs in productions, far
1.135 gdt 179: more will be needed; e.g. 4-8G and 1T of disk is reasonable for a
180: half-dozen domUs of 512M and 32G each. Basically, the RAM and disk
181: have to be bigger than the sum of the RAM/disk needs of the dom0 and
182: all the domUs.
1.45 gdt 183:
1.142 gdt 184: In 2018-05, trouble booting a dom0 was reported with 256M of RAM: with
185: 512M it worked reliably. This does not make sense, but if you see
186: "not ELF" after Xen boots, try increasing dom0 RAM.
187:
1.15 gdt 188: Styles of dom0 operation
189: ------------------------
190:
191: There are two basic ways to use Xen. The traditional method is for
192: the dom0 to do absolutely nothing other than providing support to some
193: number of domUs. Such a system was probably installed for the sole
194: purpose of hosting domUs, and sits in a server room on a UPS.
195:
196: The other way is to put Xen under a normal-usage computer, so that the
197: dom0 is what the computer would have been without Xen, perhaps a
198: desktop or laptop. Then, one can run domUs at will. Purists will
199: deride this as less secure than the previous approach, and for a
200: computer whose purpose is to run domUs, they are right. But Xen and a
1.93 gdt 201: dom0 (without domUs) is not meaningfully less secure than the same
1.15 gdt 202: things running without Xen. One can boot Xen or boot regular NetBSD
203: alternately with little problems, simply refraining from starting the
204: Xen daemons when not running Xen.
205:
206: Note that NetBSD as dom0 does not support multiple CPUs. This will
1.51 gdt 207: limit the performance of the Xen/dom0 workstation approach. In theory
208: the only issue is that the "backend drivers" are not yet MPSAFE:
1.140 khorben 209: https://mail-index.netbsd.org/netbsd-users/2014/08/29/msg015195.html
1.15 gdt 210:
1.19 gdt 211: Installation of NetBSD
212: ----------------------
1.13 gdt 213:
1.19 gdt 214: First,
1.27 jnemeth 215: [install NetBSD/amd64](/guide/inst/)
1.19 gdt 216: just as you would if you were not using Xen.
217: However, the partitioning approach is very important.
218:
219: If you want to use RAIDframe for the dom0, there are no special issues
220: for Xen. Typically one provides RAID storage for the dom0, and the
1.22 gdt 221: domU systems are unaware of RAID. The 2nd-stage loader bootxx_* skips
1.111 wiz 222: over a RAID1 header to find /boot from a file system within a RAID
1.22 gdt 223: partition; this is no different when booting Xen.
1.19 gdt 224:
225: There are 4 styles of providing backing storage for the virtual disks
1.93 gdt 226: used by domUs: raw partitions, LVM, file-backed vnd(4), and SAN.
1.19 gdt 227:
228: With raw partitions, one has a disklabel (or gpt) partition sized for
229: each virtual disk to be used by the domU. (If you are able to predict
230: how domU usage will evolve, please add an explanation to the HOWTO.
231: Seriously, needs tend to change over time.)
232:
1.27 jnemeth 233: One can use [lvm(8)](/guide/lvm/) to create logical devices to use
234: for domU disks. This is almost as efficient as raw disk partitions
235: and more flexible. Hence raw disk partitions should typically not
236: be used.
1.19 gdt 237:
1.111 wiz 238: One can use files in the dom0 file system, typically created by dd'ing
1.19 gdt 239: /dev/zero to create a specific size. This is somewhat less efficient,
240: but very convenient, as one can cp the files for backup, or move them
241: between dom0 hosts.
242:
243: Finally, in theory one can place the files backing the domU disks in a
244: SAN. (This is an invitation for someone who has done this to add a
245: HOWTO page.)
1.1 mspo 246:
1.19 gdt 247: Installation of Xen
248: -------------------
1.1 mspo 249:
1.20 gdt 250: In the dom0, install sysutils/xenkernel42 and sysutils/xentools42 from
1.127 gdt 251: pkgsrc (or another matching pair). See [the pkgsrc
1.140 khorben 252: documentation](https://www.NetBSD.org/docs/pkgsrc/) for help with
1.127 gdt 253: pkgsrc. Ensure that your packages are recent; the HOWTO does not
254: contemplate old builds.
255:
1.20 gdt 256:
257: For Xen 3.1, support for HVM guests is in sysutils/xentool3-hvm. More
258: recent versions have HVM support integrated in the main xentools
259: package. It is entirely reasonable to run only PV guests.
260:
261: Next you need to install the selected Xen kernel itself, which is
262: installed by pkgsrc as "/usr/pkg/xen*-kernel/xen.gz". Copy it to /.
263: For debugging, one may copy xen-debug.gz; this is conceptually similar
264: to DIAGNOSTIC and DEBUG in NetBSD. xen-debug.gz is basically only
265: useful with a serial console. Then, place a NetBSD XEN3_DOM0 kernel
266: in /, copied from releasedir/amd64/binary/kernel/netbsd-XEN3_DOM0.gz
1.75 gdt 267: of a NetBSD build. If using i386, use
268: releasedir/i386/binary/kernel/netbsd-XEN3PAE_DOM0.gz. (If using Xen
269: 3.1 and i386, you may use XEN3_DOM0 with the non-PAE Xen. But you
270: should not use Xen 3.1.) Both xen and the NetBSD kernel may be (and
271: typically are) left compressed.
272:
1.135 gdt 273: In a dom0, kernfs is mandatory for xend to communicate with the
274: kernel, so ensure that /kern is in fstab. (A standard NetBSD install
275: should already mount /kern.)
1.20 gdt 276:
277: Because you already installed NetBSD, you have a working boot setup
278: with an MBR bootblock, either bootxx_ffsv1 or bootxx_ffsv2 at the
1.135 gdt 279: beginning of your root file system, have /boot, and likely also
1.20 gdt 280: /boot.cfg. (If not, fix before continuing!)
281:
1.76 gdt 282: Add a line to to /boot.cfg to boot Xen. See boot.cfg(5) for an
283: example. The basic line is
1.20 gdt 284:
1.142 gdt 285: menu=Xen:load /netbsd-XEN3_DOM0.gz console=pc;multiboot /xen.gz dom0_mem=512M
1.20 gdt 286:
1.142 gdt 287: which specifies that the dom0 should have 512M, leaving the rest to be
1.77 gdt 288: allocated for domUs. To use a serial console, use
289:
1.142 gdt 290: menu=Xen:load /netbsd-XEN3_DOM0.gz;multiboot /xen.gz dom0_mem=512M console=com1 com1=9600,8n1
1.77 gdt 291:
292: which will use the first serial port for Xen (which counts starting
1.139 gson 293: from 1, unlike NetBSD which counts starting from 0), forcing
294: speed/parity. Because the NetBSD command line lacks a
295: "console=pc" argument, it will use the default "xencons" console device,
296: which directs the console I/O through Xen to the same console device Xen
297: itself uses (in this case, the serial port).
298:
299: In an attempt to add performance, one can also add
1.37 gdt 300:
301: dom0_max_vcpus=1 dom0_vcpus_pin
302:
303: to force only one vcpu to be provided (since NetBSD dom0 can't use
1.111 wiz 304: more) and to pin that vcpu to a physical CPU. TODO: benchmark this.
1.20 gdt 305:
1.93 gdt 306: Xen has [many boot
307: options](http://xenbits.xenproject.org/docs/4.5-testing/misc/xen-command-line.html),
1.111 wiz 308: and other than dom0 memory and max_vcpus, they are generally not
1.93 gdt 309: necessary.
310:
1.20 gdt 311: As with non-Xen systems, you should have a line to boot /netbsd (a
1.127 gdt 312: kernel that works without Xen). Consider a line to boot /netbsd.ok (a
313: fallback version of the non-Xen kernel, updated manually when you are
314: sure /netbsd is ok). Consider also a line to boot fallback versions
315: of Xen and the dom0 kernel, but note that non-Xen NetBSD can be used
316: to resolve Xen booting issues.
317:
318: Probably you want a default=N line to choose Xen in the absence of
319: intervention.
1.1 mspo 320:
1.76 gdt 321: Now, reboot so that you are running a DOM0 kernel under Xen, rather
322: than GENERIC without Xen.
323:
1.54 gdt 324: Using grub (historic)
325: ---------------------
326:
327: Before NetBSD's native bootloader could support Xen, the use of
328: grub was recommended. If necessary, see the
1.135 gdt 329: [old grub information](/ports/xen/howto-grub).
1.54 gdt 330:
1.28 gdt 331: The [HowTo on Installing into
1.140 khorben 332: RAID-1](https://mail-index.NetBSD.org/port-xen/2006/03/01/0010.html)
1.28 gdt 333: explains how to set up booting a dom0 with Xen using grub with
334: NetBSD's RAIDframe. (This is obsolete with the use of NetBSD's native
1.135 gdt 335: boot. Now, just create a system with RAID-1, and alter /boot.cfg as
336: described above.)
1.28 gdt 337:
1.21 gdt 338: Configuring Xen
339: ---------------
340:
1.53 gdt 341: Xen logs will be in /var/log/xen.
342:
1.76 gdt 343: Now, you have a system that will boot Xen and the dom0 kernel, but not
344: do anything else special. Make sure that you have rebooted into Xen.
345: There will be no domUs, and none can be started because you still have
1.102 gdt 346: to configure the dom0 daemons.
1.21 gdt 347:
1.102 gdt 348: The daemons which should be run vary with Xen version and with whether
1.127 gdt 349: one is using xm or xl. The Xen 3.1, 3.3 and 4.1 packages use xm. Xen
350: 4.2 and up packages use xl. To use xm with 4.2, edit xendomains to
351: use xm instead.
352:
1.132 gdt 353: For 3.1 and 3.3, you should enable xend and xenbackendd:
1.31 gdt 354:
1.32 gdt 355: xend=YES
356: xenbackendd=YES
1.31 gdt 357:
1.132 gdt 358: For 4.1 and up, you should enable xencommons. Not enabling xencommons
359: will result in a hang; it is necessary to hit ^C on the console to let
360: the machine finish booting. If you are using xm (default in 4.1, or
361: if you changed xendomains in 4.2), you should also enable xend:
1.31 gdt 362:
1.132 gdt 363: xend=YES # only if using xm, and only installed <= 4.2
1.53 gdt 364: xencommons=YES
1.31 gdt 365:
366: TODO: Recommend for/against xen-watchdog.
1.27 jnemeth 367:
1.53 gdt 368: After you have configured the daemons and either started them (in the
1.79 gdt 369: order given) or rebooted, use xm or xl to inspect Xen's boot messages,
1.102 gdt 370: available resources, and running domains. An example with xl follows:
1.34 gdt 371:
1.102 gdt 372: # xl dmesg
1.43 gdt 373: [xen's boot info]
1.102 gdt 374: # xl info
1.43 gdt 375: [available memory, etc.]
1.102 gdt 376: # xl list
1.43 gdt 377: Name Id Mem(MB) CPU State Time(s) Console
378: Domain-0 0 64 0 r---- 58.1
1.33 gdt 379:
1.88 gdt 380: ### Issues with xencommons
381:
382: xencommons starts xenstored, which stores data on behalf of dom0 and
383: domUs. It does not currently work to stop and start xenstored.
384: Certainly all domUs should be shutdown first, following the sort order
385: of the rc.d scripts. However, the dom0 sets up state with xenstored,
386: and is not notified when xenstored exits, leading to not recreating
387: the state when the new xenstored starts. Until there's a mechanism to
388: make this work, one should not expect to be able to restart xenstored
389: (and thus xencommons). There is currently no reason to expect that
390: this will get fixed any time soon.
391:
1.127 gdt 392: ### No-longer needed advice about devices
393:
394: The installation of NetBSD should already have created devices for xen
395: (xencons, xenevt, xsd_kva), but if they are not present, create them:
396:
397: cd /dev && sh MAKEDEV xen
398:
1.41 gdt 399: anita (for testing NetBSD)
400: --------------------------
401:
1.82 gdt 402: With the setup so far (assuming 4.2/xl), one should be able to run
403: anita (see pkgsrc/misc/py-anita) to test NetBSD releases, by doing (as
404: root, because anita must create a domU):
405:
406: anita --vmm=xl test file:///usr/obj/i386/
407:
408: Alternatively, one can use --vmm=xm to use xm-based domU creation
409: instead (and must, on Xen <= 4.1). TODO: confirm that anita xl really works.
410:
1.40 gdt 411: Xen-specific NetBSD issues
412: --------------------------
413:
414: There are (at least) two additional things different about NetBSD as a
415: dom0 kernel compared to hardware.
416:
1.111 wiz 417: One is that the module ABI is different because some of the #defines
1.109 gdt 418: change, so one must build modules for Xen. As of netbsd-7, the build
419: system does this automatically. TODO: check this. (Before building
420: Xen modules was added, it was awkward to use modules to the point
421: where it was considered that it did not work.)
1.40 gdt 422:
423: The other difference is that XEN3_DOM0 does not have exactly the same
424: options as GENERIC. While it is debatable whether or not this is a
425: bug, users should be aware of this and can simply add missing config
426: items if desired.
427:
1.15 gdt 428: Updating NetBSD in a dom0
429: -------------------------
430:
431: This is just like updating NetBSD on bare hardware, assuming the new
432: version supports the version of Xen you are running. Generally, one
433: replaces the kernel and reboots, and then overlays userland binaries
434: and adjusts /etc.
435:
436: Note that one must update both the non-Xen kernel typically used for
437: rescue purposes and the DOM0 kernel used with Xen.
438:
1.55 gdt 439: Converting from grub to /boot
440: -----------------------------
441:
442: These instructions were [TODO: will be] used to convert a system from
443: grub to /boot. The system was originally installed in February of
444: 2006 with a RAID1 setup and grub to boot Xen 2, and has been updated
445: over time. Before these commands, it was running NetBSD 6 i386, Xen
446: 4.1 and grub, much like the message linked earlier in the grub
447: section.
448:
1.111 wiz 449: # Install MBR bootblocks on both disks.
1.55 gdt 450: fdisk -i /dev/rwd0d
451: fdisk -i /dev/rwd1d
452: # Install NetBSD primary boot loader (/ is FFSv1) into RAID1 components.
453: installboot -v /dev/rwd0d /usr/mdec/bootxx_ffsv1
454: installboot -v /dev/rwd1d /usr/mdec/bootxx_ffsv1
455: # Install secondary boot loader
456: cp -p /usr/mdec/boot /
1.111 wiz 457: # Create boot.cfg following earlier guidance:
1.142 gdt 458: menu=Xen:load /netbsd-XEN3PAE_DOM0.gz console=pc;multiboot /xen.gz dom0_mem=512M
459: menu=Xen.ok:load /netbsd-XEN3PAE_DOM0.ok.gz console=pc;multiboot /xen.ok.gz dom0_mem=512M
1.55 gdt 460: menu=GENERIC:boot
461: menu=GENERIC single-user:boot -s
462: menu=GENERIC.ok:boot netbsd.ok
463: menu=GENERIC.ok single-user:boot netbsd.ok -s
464: menu=Drop to boot prompt:prompt
465: default=1
466: timeout=30
467:
468: TODO: actually do this and fix it if necessary.
1.22 gdt 469:
1.102 gdt 470: Upgrading Xen versions
1.15 gdt 471: ---------------------
472:
1.110 gdt 473: Minor version upgrades are trivial. Just rebuild/replace the
474: xenkernel version and copy the new xen.gz to / (where /boot.cfg
475: references it), and reboot.
476:
477: Major version upgrades are conceptually not difficult, but can run
478: into all the issues found when installing Xen. Assuming migration
479: from 4.1 to 4.2, remove the xenkernel41 and xentools41 packages and
480: install the xenkernel42 and xentools42 packages. Copy the 4.2 xen.gz
481: to /.
1.21 gdt 482:
1.102 gdt 483: Ensure that the contents of /etc/rc.d/xen* are correct. Specifically,
484: they must match the package you just installed and not be left over
485: from some previous installation.
486:
487: Enable the correct set of daemons; see the configuring section above.
488: (Upgrading from 3.x to 4.x without doing this will result in a hang.)
489:
490: Ensure that the domU config files are valid for the new version.
1.110 gdt 491: Specifically, for 4.x remove autorestart=True, and ensure that disks
492: are specified with numbers as the second argument, as the examples
493: above show, and not NetBSD device names.
1.15 gdt 494:
1.97 gdt 495: Hardware known to work
496: ----------------------
497:
498: Arguably, this section is misplaced, and there should be a page of
499: hardware that runs NetBSD/amd64 well, with the mostly-well-founded
500: assumption that NetBSD/xen runs fine on any modern hardware that
1.129 gdt 501: NetBSD/amd64 runs well on. Until then, we give motherboard/CPU (and
502: sometimes RAM) pairs/triples to aid those choosing a motherboard.
503: Note that Xen systems usually do not run X, so a listing here does not
504: imply that X works at all.
1.97 gdt 505:
506: Supermicro X9SRL-F, Xeon E5-1650 v2, 96 GiB ECC
507: Supermicro ??, Atom C2758 (8 core), 32 GiB ECC
508: ASUS M5A78L-M/USB3 AM3+ microATX, AMD Piledriver X8 4000MHz, 16 GiB ECC
509:
510: Older hardware:
511:
1.98 gdt 512: Intel D915GEV, Pentium4 CPU 3.40GHz, 4GB 533MHz Synchronous DDR2
1.129 gdt 513: INTEL DG33FB, "Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz"
514: INTEL DG33FB, "Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz"
1.28 gdt 515:
1.82 gdt 516: Running Xen under qemu
517: ----------------------
518:
519: The astute reader will note that this section is somewhat twisted.
520: However, it can be useful to run Xen under qemu either because the
521: version of NetBSD as a dom0 does not run on the hardware in use, or to
522: generate automated test cases involving Xen.
523:
1.84 gdt 524: In 2015-01, the following combination was reported to mostly work:
1.82 gdt 525:
526: host OS: NetBSD/amd64 6.1.4
527: qemu: 2.2.0 from pkgsrc
528: Xen kernel: xenkernel42-4.2.5nb1 from pkgsrc
529: dom0 kernel: NetBSD/amd64 6.1.5
530: Xen tools: xentools42-4.2.5 from pkgsrc
531:
1.140 khorben 532: See [PR 47720](https://gnats.netbsd.org/47720) for a problem with dom0
1.91 gdt 533: shutdown.
1.84 gdt 534:
1.28 gdt 535: Unprivileged domains (domU)
536: ===========================
537:
538: This section describes general concepts about domUs. It does not
1.33 gdt 539: address specific domU operating systems or how to install them. The
540: config files for domUs are typically in /usr/pkg/etc/xen, and are
1.60 wiki 541: typically named so that the file name, domU name and the domU's host
1.33 gdt 542: name match.
543:
1.111 wiz 544: The domU is provided with CPU and memory by Xen, configured by the
1.33 gdt 545: dom0. The domU is provided with disk and network by the dom0,
546: mediated by Xen, and configured in the dom0.
547:
548: Entropy in domUs can be an issue; physical disks and network are on
549: the dom0. NetBSD's /dev/random system works, but is often challenged.
550:
1.48 gdt 551: Config files
552: ------------
553:
554: There is no good order to present config files and the concepts
555: surrounding what is being configured. We first show an example config
556: file, and then in the various sections give details.
557:
558: See (at least in xentools41) /usr/pkg/share/examples/xen/xmexample*,
559: for a large number of well-commented examples, mostly for running
560: GNU/Linux.
561:
562: The following is an example minimal domain configuration file
563: "/usr/pkg/etc/xen/foo". It is (with only a name change) an actual
564: known working config file on Xen 4.1 (NetBSD 5 amd64 dom0 and NetBSD 5
565: i386 domU). The domU serves as a network file server.
566:
567: # -*- mode: python; -*-
568:
569: kernel = "/netbsd-XEN3PAE_DOMU-i386-foo.gz"
570: memory = 1024
571: vif = [ 'mac=aa:00:00:d1:00:09,bridge=bridge0' ]
572: disk = [ 'file:/n0/xen/foo-wd0,0x0,w',
573: 'file:/n0/xen/foo-wd1,0x1,w' ]
574:
575: The domain will have the same name as the file. The kernel has the
576: host/domU name in it, so that on the dom0 one can update the various
577: domUs independently. The vif line causes an interface to be provided,
578: with a specific mac address (do not reuse MAC addresses!), in bridge
579: mode. Two disks are provided, and they are both writable; the bits
580: are stored in files and Xen attaches them to a vnd(4) device in the
1.111 wiz 581: dom0 on domain creation. The system treats xbd0 as the boot device
1.48 gdt 582: without needing explicit configuration.
583:
584: By default xm looks for domain config files in /usr/pkg/etc/xen. Note
585: that "xm create" takes the name of a config file, while other commands
586: take the name of a domain. To create the domain, connect to the
587: console, create the domain while attaching the console, shutdown the
588: domain, and see if it has finished stopping, do (or xl with Xen >=
589: 4.2):
590:
591: xm create foo
592: xm console foo
593: xm create -c foo
594: xm shutdown foo
1.90 gdt 595: xm list
1.48 gdt 596:
597: Typing ^] will exit the console session. Shutting down a domain is
598: equivalent to pushing the power button; a NetBSD domU will receive a
599: power-press event and do a clean shutdown. Shutting down the dom0
600: will trigger controlled shutdowns of all configured domUs.
601:
602: domU kernels
603: ------------
604:
605: On a physical computer, the BIOS reads sector 0, and a chain of boot
606: loaders finds and loads a kernel. Normally this comes from the root
1.111 wiz 607: file system. With Xen domUs, the process is totally different. The
1.48 gdt 608: normal path is for the domU kernel to be a file in the dom0's
1.111 wiz 609: file system. At the request of the dom0, Xen loads that kernel into a
1.48 gdt 610: new domU instance and starts execution. While domU kernels can be
611: anyplace, reasonable places to store domU kernels on the dom0 are in /
612: (so they are near the dom0 kernel), in /usr/pkg/etc/xen (near the
613: config files), or in /u0/xen (where the vdisks are).
614:
1.59 gdt 615: Note that loading the domU kernel from the dom0 implies that boot
616: blocks, /boot, /boot.cfg, and so on are all ignored in the domU.
1.48 gdt 617: See the VPS section near the end for discussion of alternate ways to
618: obtain domU kernels.
619:
1.33 gdt 620: CPU and memory
621: --------------
622:
1.48 gdt 623: A domain is provided with some number of vcpus, less than the number
1.111 wiz 624: of CPUs seen by the hypervisor. (For a dom0, this is controlled by
1.48 gdt 625: the boot argument "dom0_max_vcpus=1".) For a domU, it is controlled
626: from the config file by the "vcpus = N" directive.
627:
628: A domain is provided with memory; this is controlled in the config
629: file by "memory = N" (in megabytes). In the straightforward case, the
630: sum of the the memory allocated to the dom0 and all domUs must be less
1.33 gdt 631: than the available memory.
632:
633: Xen also provides a "balloon" driver, which can be used to let domains
634: use more memory temporarily. TODO: Explain better, and explain how
635: well it works with NetBSD.
1.28 gdt 636:
637: Virtual disks
638: -------------
639:
1.33 gdt 640: With the file/vnd style, typically one creates a directory,
641: e.g. /u0/xen, on a disk large enough to hold virtual disks for all
642: domUs. Then, for each domU disk, one writes zeros to a file that then
643: serves to hold the virtual disk's bits; a suggested name is foo-xbd0
644: for the first virtual disk for the domU called foo. Writing zeros to
645: the file serves two purposes. One is that preallocating the contents
646: improves performance. The other is that vnd on sparse files has
647: failed to work. TODO: give working/notworking NetBSD versions for
1.127 gdt 648: sparse vnd and gnats reference. Note that the use of file/vnd for Xen
649: is not really different than creating a file-backed virtual disk for
650: some other purpose, except that xentools handles the vnconfig
651: commands. To create an empty 4G virtual disk, simply do
1.39 gdt 652:
653: dd if=/dev/zero of=foo-xbd0 bs=1m count=4096
1.33 gdt 654:
1.89 gdt 655: Do not use qemu-img-xen, because this will create sparse file. There
656: have been recent (2015) reports of sparse vnd(4) devices causing
657: lockups, but there is apparently no PR.
658:
1.33 gdt 659: With the lvm style, one creates logical devices. They are then used
1.48 gdt 660: similarly to vnds. TODO: Add an example with lvm.
661:
662: In domU config files, the disks are defined as a sequence of 3-tuples.
663: The first element is "method:/path/to/disk". Common methods are
664: "file:" for file-backed vnd. and "phy:" for something that is already
665: a (TODO: character or block) device.
666:
667: The second element is an artifact of how virtual disks are passed to
668: Linux, and a source of confusion with NetBSD Xen usage. Linux domUs
669: are given a device name to associate with the disk, and values like
670: "hda1" or "sda1" are common. In a NetBSD domU, the first disk appears
671: as xbd0, the second as xbd1, and so on. However, xm/xl demand a
672: second argument. The name given is converted to a major/minor by
1.49 gdt 673: calling stat(2) on the name in /dev and this is passed to the domU.
674: In the general case, the dom0 and domU can be different operating
1.48 gdt 675: systems, and it is an unwarranted assumption that they have consistent
676: numbering in /dev, or even that the dom0 OS has a /dev. With NetBSD
677: as both dom0 and domU, using values of 0x0 for the first disk and 0x1
1.49 gdt 678: for the second works fine and avoids this issue. For a GNU/Linux
679: guest, one can create /dev/hda1 in /dev, or to pass 0x301 for
680: /dev/hda1.
1.48 gdt 681:
682: The third element is "w" for writable disks, and "r" for read-only
683: disks.
1.28 gdt 684:
1.127 gdt 685: Note that NetBSD by default creates only vnd[0123]. If you need more
686: than 4 total virtual disks at a time, run e.g. "./MAKEDEV vnd4" in the
687: dom0.
688:
689: Note that NetBSD by default creates only xbd[0123]. If you need more
690: virtual disks in a domU, run e.g. "./MAKEDEV xbd4" in the domU.
691:
1.28 gdt 692: Virtual Networking
693: ------------------
694:
1.111 wiz 695: Xen provides virtual Ethernets, each of which connects the dom0 and a
1.46 gdt 696: domU. For each virtual network, there is an interface "xvifN.M" in
697: the dom0, and in domU index N, a matching interface xennetM (NetBSD
698: name). The interfaces behave as if there is an Ethernet with two
1.111 wiz 699: adapters connected. From this primitive, one can construct various
1.46 gdt 700: configurations. We focus on two common and useful cases for which
701: there are existing scripts: bridging and NAT.
1.28 gdt 702:
1.48 gdt 703: With bridging (in the example above), the domU perceives itself to be
704: on the same network as the dom0. For server virtualization, this is
705: usually best. Bridging is accomplished by creating a bridge(4) device
706: and adding the dom0's physical interface and the various xvifN.0
707: interfaces to the bridge. One specifies "bridge=bridge0" in the domU
708: config file. The bridge must be set up already in the dom0; an
709: example /etc/ifconfig.bridge0 is:
1.46 gdt 710:
711: create
712: up
713: !brconfig bridge0 add wm0
1.28 gdt 714:
715: With NAT, the domU perceives itself to be behind a NAT running on the
716: dom0. This is often appropriate when running Xen on a workstation.
1.48 gdt 717: TODO: NAT appears to be configured by "vif = [ '' ]".
1.28 gdt 718:
1.49 gdt 719: The MAC address specified is the one used for the interface in the new
1.53 gdt 720: domain. The interface in dom0 will use this address XOR'd with
1.49 gdt 721: 00:00:00:01:00:00. Random MAC addresses are assigned if not given.
722:
1.33 gdt 723: Sizing domains
724: --------------
725:
726: Modern x86 hardware has vast amounts of resources. However, many
727: virtual servers can function just fine on far less. A system with
1.142 gdt 728: 512M of RAM and a 4G disk can be a reasonable choice. Note that it is
1.33 gdt 729: far easier to adjust virtual resources than physical ones. For
730: memory, it's just a config file edit and a reboot. For disk, one can
731: create a new file and vnconfig it (or lvm), and then dump/restore,
732: just like updating physical disks, but without having to be there and
733: without those pesky connectors.
734:
1.48 gdt 735: Starting domains automatically
736: ------------------------------
1.28 gdt 737:
1.48 gdt 738: To start domains foo at bar at boot and shut them down cleanly on dom0
739: shutdown, in rc.conf add:
1.28 gdt 740:
1.48 gdt 741: xendomains="foo bar"
1.28 gdt 742:
1.111 wiz 743: Note that earlier versions of the xentools41 xendomains rc.d script
744: used xl, when one should use xm with 4.1.
1.28 gdt 745:
746: Creating specific unprivileged domains (domU)
747: =============================================
1.14 gdt 748:
749: Creating domUs is almost entirely independent of operating system. We
1.49 gdt 750: have already presented the basics of config files. Note that you must
751: have already completed the dom0 setup so that "xl list" (or "xm list")
752: works.
1.14 gdt 753:
754: Creating an unprivileged NetBSD domain (domU)
755: ---------------------------------------------
1.1 mspo 756:
1.49 gdt 757: See the earlier config file, and adjust memory. Decide on how much
758: storage you will provide, and prepare it (file or lvm).
759:
1.111 wiz 760: While the kernel will be obtained from the dom0 file system, the same
1.49 gdt 761: file should be present in the domU as /netbsd so that tools like
762: savecore(8) can work. (This is helpful but not necessary.)
763:
764: The kernel must be specifically for Xen and for use as a domU. The
765: i386 and amd64 provide the following kernels:
766:
767: i386 XEN3_DOMU
768: i386 XEN3PAE_DOMU
1.95 gdt 769: amd64 XEN3_DOMU
1.5 mspo 770:
1.49 gdt 771: Unless using Xen 3.1 (and you shouldn't) with i386-mode Xen, you must
772: use the PAE version of the i386 kernel.
773:
774: This will boot NetBSD, but this is not that useful if the disk is
775: empty. One approach is to unpack sets onto the disk outside of xen
776: (by mounting it, just as you would prepare a physical disk for a
777: system you can't run the installer on).
778:
779: A second approach is to run an INSTALL kernel, which has a miniroot
780: and can load sets from the network. To do this, copy the INSTALL
781: kernel to / and change the kernel line in the config file to:
1.5 mspo 782:
1.49 gdt 783: kernel = "/home/bouyer/netbsd-INSTALL_XEN3_DOMU"
1.5 mspo 784:
1.49 gdt 785: Then, start the domain as "xl create -c configname".
1.1 mspo 786:
1.49 gdt 787: Alternatively, if you want to install NetBSD/Xen with a CDROM image, the following
788: line should be used in the config file.
1.1 mspo 789:
1.3 mspo 790: disk = [ 'phy:/dev/wd0e,0x1,w', 'phy:/dev/cd0a,0x2,r' ]
1.1 mspo 791:
792: After booting the domain, the option to install via CDROM may be
1.49 gdt 793: selected. The CDROM device should be changed to `xbd1d`.
1.1 mspo 794:
1.49 gdt 795: Once done installing, "halt -p" the new domain (don't reboot or halt,
796: it would reload the INSTALL_XEN3_DOMU kernel even if you changed the
797: config file), switch the config file back to the XEN3_DOMU kernel,
798: and start the new domain again. Now it should be able to use "root on
799: xbd0a" and you should have a, functional NetBSD domU.
1.1 mspo 800:
1.49 gdt 801: TODO: check if this is still accurate.
1.1 mspo 802: When the new domain is booting you'll see some warnings about *wscons*
803: and the pseudo-terminals. These can be fixed by editing the files
1.5 mspo 804: `/etc/ttys` and `/etc/wscons.conf`. You must disable all terminals in
805: `/etc/ttys`, except *console*, like this:
1.1 mspo 806:
1.3 mspo 807: console "/usr/libexec/getty Pc" vt100 on secure
808: ttyE0 "/usr/libexec/getty Pc" vt220 off secure
809: ttyE1 "/usr/libexec/getty Pc" vt220 off secure
810: ttyE2 "/usr/libexec/getty Pc" vt220 off secure
811: ttyE3 "/usr/libexec/getty Pc" vt220 off secure
1.1 mspo 812:
1.5 mspo 813: Finally, all screens must be commented out from `/etc/wscons.conf`.
1.1 mspo 814:
815: It is also desirable to add
816:
1.49 gdt 817: powerd=YES
1.1 mspo 818:
1.5 mspo 819: in rc.conf. This way, the domain will be properly shut down if
1.53 gdt 820: `xm shutdown -R` or `xm shutdown -H` is used on the dom0.
1.1 mspo 821:
1.92 gdt 822: It is not strictly necessary to have a kernel (as /netbsd) in the domU
1.111 wiz 823: file system. However, various programs (e.g. netstat) will use that
1.92 gdt 824: kernel to look up symbols to read from kernel virtual memory. If
825: /netbsd is not the running kernel, those lookups will fail. (This is
826: not really a Xen-specific issue, but because the domU kernel is
827: obtained from the dom0, it is far more likely to be out of sync or
828: missing with Xen.)
829:
1.14 gdt 830: Creating an unprivileged Linux domain (domU)
1.5 mspo 831: --------------------------------------------
1.1 mspo 832:
833: Creating unprivileged Linux domains isn't much different from
834: unprivileged NetBSD domains, but there are some details to know.
835:
836: First, the second parameter passed to the disk declaration (the '0x1' in
837: the example below)
838:
1.3 mspo 839: disk = [ 'phy:/dev/wd0e,0x1,w' ]
1.1 mspo 840:
841: does matter to Linux. It wants a Linux device number here (e.g. 0x300
1.49 gdt 842: for hda). Linux builds device numbers as: (major \<\< 8 + minor).
843: So, hda1 which has major 3 and minor 1 on a Linux system will have
844: device number 0x301. Alternatively, devices names can be used (hda,
845: hdb, ...) as xentools has a table to map these names to devices
846: numbers. To export a partition to a Linux guest we can use:
1.1 mspo 847:
1.49 gdt 848: disk = [ 'phy:/dev/wd0e,0x300,w' ]
849: root = "/dev/hda1 ro"
1.1 mspo 850:
851: and it will appear as /dev/hda on the Linux system, and be used as root
852: partition.
853:
1.49 gdt 854: To install the Linux system on the partition to be exported to the
855: guest domain, the following method can be used: install
856: sysutils/e2fsprogs from pkgsrc. Use mke2fs to format the partition
857: that will be the root partition of your Linux domain, and mount it.
858: Then copy the files from a working Linux system, make adjustments in
859: `/etc` (fstab, network config). It should also be possible to extract
860: binary packages such as .rpm or .deb directly to the mounted partition
861: using the appropriate tool, possibly running under NetBSD's Linux
1.111 wiz 862: emulation. Once the file system has been populated, umount it. If
863: desirable, the file system can be converted to ext3 using tune2fs -j.
1.49 gdt 864: It should now be possible to boot the Linux guest domain, using one of
865: the vmlinuz-\*-xenU kernels available in the Xen binary distribution.
1.1 mspo 866:
1.111 wiz 867: To get the Linux console right, you need to add:
1.1 mspo 868:
1.3 mspo 869: extra = "xencons=tty1"
1.1 mspo 870:
1.111 wiz 871: to your configuration since not all Linux distributions auto-attach a
1.1 mspo 872: tty to the xen console.
873:
1.14 gdt 874: Creating an unprivileged Solaris domain (domU)
1.5 mspo 875: ----------------------------------------------
1.1 mspo 876:
1.50 gdt 877: See possibly outdated
878: [Solaris domU instructions](/ports/xen/howto-solaris/).
1.5 mspo 879:
1.1 mspo 880:
1.52 gdt 881: PCI passthrough: Using PCI devices in guest domains
882: ---------------------------------------------------
1.1 mspo 883:
1.53 gdt 884: The dom0 can give other domains access to selected PCI
1.52 gdt 885: devices. This can allow, for example, a non-privileged domain to have
886: access to a physical network interface or disk controller. However,
887: keep in mind that giving a domain access to a PCI device most likely
888: will give the domain read/write access to the whole physical memory,
889: as PCs don't have an IOMMU to restrict memory access to DMA-capable
1.53 gdt 890: device. Also, it's not possible to export ISA devices to non-dom0
1.52 gdt 891: domains, which means that the primary VGA adapter can't be exported.
892: A guest domain trying to access the VGA registers will panic.
893:
1.53 gdt 894: If the dom0 is NetBSD, it has to be running Xen 3.1, as support has
1.52 gdt 895: not been ported to later versions at this time.
896:
897: For a PCI device to be exported to a domU, is has to be attached to
898: the "pciback" driver in dom0. Devices passed to the dom0 via the
899: pciback.hide boot parameter will attach to "pciback" instead of the
900: usual driver. The list of devices is specified as "(bus:dev.func)",
1.5 mspo 901: where bus and dev are 2-digit hexadecimal numbers, and func a
902: single-digit number:
1.1 mspo 903:
1.52 gdt 904: pciback.hide=(00:0a.0)(00:06.0)
1.1 mspo 905:
1.52 gdt 906: pciback devices should show up in the dom0's boot messages, and the
1.5 mspo 907: devices should be listed in the `/kern/xen/pci` directory.
1.1 mspo 908:
1.52 gdt 909: PCI devices to be exported to a domU are listed in the "pci" array of
910: the domU's config file, with the format "0000:bus:dev.func".
1.1 mspo 911:
1.52 gdt 912: pci = [ '0000:00:06.0', '0000:00:0a.0' ]
1.1 mspo 913:
1.52 gdt 914: In the domU an "xpci" device will show up, to which one or more pci
1.111 wiz 915: buses will attach. Then the PCI drivers will attach to PCI buses as
1.52 gdt 916: usual. Note that the default NetBSD DOMU kernels do not have "xpci"
917: or any PCI drivers built in by default; you have to build your own
918: kernel to use PCI devices in a domU. Here's a kernel config example;
919: note that only the "xpci" lines are unusual.
920:
921: include "arch/i386/conf/XEN3_DOMU"
922:
1.111 wiz 923: # Add support for PCI buses to the XEN3_DOMU kernel
1.52 gdt 924: xpci* at xenbus ?
925: pci* at xpci ?
926:
927: # PCI USB controllers
928: uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
929:
930: # USB bus support
931: usb* at uhci?
932:
933: # USB Hubs
934: uhub* at usb?
935: uhub* at uhub? port ? configuration ? interface ?
936:
937: # USB Mass Storage
938: umass* at uhub? port ? configuration ? interface ?
939: wd* at umass?
940: # SCSI controllers
941: ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
942:
943: # SCSI bus support (for both ahc and umass)
944: scsibus* at scsi?
945:
946: # SCSI devices
947: sd* at scsibus? target ? lun ? # SCSI disk drives
948: cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
1.1 mspo 949:
950:
1.28 gdt 951: NetBSD as a domU in a VPS
952: =========================
953:
954: The bulk of the HOWTO is about using NetBSD as a dom0 on your own
955: hardware. This section explains how to deal with Xen in a domU as a
956: virtual private server where you do not control or have access to the
1.70 gdt 957: dom0. This is not intended to be an exhaustive list of VPS providers;
958: only a few are mentioned that specifically support NetBSD.
1.28 gdt 959:
1.52 gdt 960: VPS operators provide varying degrees of access and mechanisms for
961: configuration. The big issue is usually how one controls which kernel
1.111 wiz 962: is booted, because the kernel is nominally in the dom0 file system (to
963: which VPS users do not normally have access). A second issue is how
1.70 gdt 964: to install NetBSD.
1.52 gdt 965: A VPS user may want to compile a kernel for security updates, to run
966: npf, run IPsec, or any other reason why someone would want to change
967: their kernel.
968:
1.111 wiz 969: One approach is to have an administrative interface to upload a kernel,
1.68 gdt 970: or to select from a prepopulated list. Other approaches are pygrub
1.59 gdt 971: (deprecated) and pvgrub, which are ways to have a bootloader obtain a
1.111 wiz 972: kernel from the domU file system. This is closer to a regular physical
1.59 gdt 973: computer, where someone who controls a machine can replace the kernel.
1.52 gdt 974:
1.74 gdt 975: A second issue is multiple CPUs. With NetBSD 6, domUs support
976: multiple vcpus, and it is typical for VPS providers to enable multiple
977: CPUs for NetBSD domUs.
978:
1.68 gdt 979: pygrub
1.59 gdt 980: -------
1.52 gdt 981:
1.111 wiz 982: pygrub runs in the dom0 and looks into the domU file system. This
983: implies that the domU must have a kernel in a file system in a format
1.68 gdt 984: known to pygrub. As of 2014, pygrub seems to be of mostly historical
985: interest.
1.52 gdt 986:
1.59 gdt 987: pvgrub
988: ------
989:
990: pvgrub is a version of grub that uses PV operations instead of BIOS
991: calls. It is booted from the dom0 as the domU kernel, and then reads
1.111 wiz 992: /grub/menu.lst and loads a kernel from the domU file system.
1.59 gdt 993:
1.70 gdt 994: [Panix](http://www.panix.com/) lets users use pvgrub. Panix reports
1.71 gdt 995: that pvgrub works with FFsv2 with 16K/2K and 32K/4K block/frag sizes
996: (and hence with defaults from "newfs -O 2"). See [Panix's pvgrub
1.70 gdt 997: page](http://www.panix.com/v-colo/grub.html), which describes only
1.74 gdt 998: Linux but should be updated to cover NetBSD :-).
1.70 gdt 999:
1000: [prgmr.com](http://prgmr.com/) also lets users with pvgrub to boot
1001: their own kernel. See then [prgmr.com NetBSD
1.74 gdt 1002: HOWTO](http://wiki.prgmr.com/mediawiki/index.php/NetBSD_as_a_DomU)
1003: (which is in need of updating).
1.59 gdt 1004:
1.70 gdt 1005: It appears that [grub's FFS
1006: code](http://xenbits.xensource.com/hg/xen-unstable.hg/file/bca284f67702/tools/libfsimage/ufs/fsys_ufs.c)
1007: does not support all aspects of modern FFS, but there are also reports
1.72 gdt 1008: that FFSv2 works fine. At prgmr, typically one has an ext2 or FAT
1.70 gdt 1009: partition for the kernel with the intent that grub can understand it,
1010: which leads to /netbsd not being the actual kernel. One must remember
1.111 wiz 1011: to update the special boot partition.
1.59 gdt 1012:
1013: Amazon
1014: ------
1015:
1.143 wiki 1016: See the [Amazon EC2 page](/amazon_ec2/).
1.44 gdt 1017:
1.65 gdt 1018: TODO items for improving NetBSD/xen
1019: ===================================
1020:
1.93 gdt 1021: * Make the NetBSD dom0 kernel work with SMP.
1022: * Test the Xen 4.5 packages adequately to be able to recommend them as
1023: the standard approach.
1024: * Get PCI passthrough working on Xen 4.5
1.65 gdt 1025: * Get pvgrub into pkgsrc, either via xentools or separately.
1026: * grub
1.70 gdt 1027: * Check/add support to pkgsrc grub2 for UFS2 and arbitrary
1.66 gdt 1028: fragsize/blocksize (UFS2 support may be present; the point is to
1.111 wiz 1029: make it so that with any UFS1/UFS2 file system setup that works
1.66 gdt 1030: with NetBSD grub will also work).
1.140 khorben 1031: See [pkg/40258](https://gnats.netbsd.org/40258).
1.65 gdt 1032: * Push patches upstream.
1033: * Get UFS2 patches into pvgrub.
1034: * Add support for PV ops to a version of /boot, and make it usable as
1035: a kernel in Xen, similar to pvgrub.
1.93 gdt 1036:
1037: Random pointers
1038: ===============
1039:
1.117 gdt 1040: This section contains links from elsewhere not yet integrated into the
1041: HOWTO, and other guides.
1.93 gdt 1042:
1043: * http://www.lumbercartel.ca/library/xen/
1044: * http://pbraun.nethence.com/doc/sysutils/xen_netbsd_dom0.html
1.117 gdt 1045: * https://gmplib.org/~tege/xen.html
CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb