Diff for /wikisrc/ports/xen/howto.mdwn between versions 1.75 and 1.76

version 1.75, 2015/01/17 01:32:12 version 1.76, 2015/01/17 01:34:29
Line 289  with an MBR bootblock, either bootxx_ffs Line 289  with an MBR bootblock, either bootxx_ffs
 beginning of your root filesystem, /boot present, and likely  beginning of your root filesystem, /boot present, and likely
 /boot.cfg.  (If not, fix before continuing!)  /boot.cfg.  (If not, fix before continuing!)
   
 See boot.cfg(5) for an example.  The basic line is  Add a line to to /boot.cfg to boot Xen.  See boot.cfg(5) for an
   example.  The basic line is
   
         menu=Xen:load /netbsd-XEN3_DOM0.gz console=pc;multiboot /xen.gz dom0_mem=256M          menu=Xen:load /netbsd-XEN3_DOM0.gz console=pc;multiboot /xen.gz dom0_mem=256M
   
Line 306  As with non-Xen systems, you should have Line 307  As with non-Xen systems, you should have
 kernel that works without Xen) and fallback versions of the non-Xen  kernel that works without Xen) and fallback versions of the non-Xen
 kernel, Xen, and the dom0 kernel.  kernel, Xen, and the dom0 kernel.
   
   Now, reboot so that you are running a DOM0 kernel under Xen, rather
   than GENERIC without Xen.
   
 Using grub (historic)  Using grub (historic)
 ---------------------  ---------------------
   
Line 324  Configuring Xen Line 328  Configuring Xen
   
 Xen logs will be in /var/log/xen.  Xen logs will be in /var/log/xen.
   
 Now, you have a system that will boot Xen and the dom0 kernel, and  Now, you have a system that will boot Xen and the dom0 kernel, but not
 just run the dom0 kernel.  There will be no domUs, and none can be  do anything else special.  Make sure that you have rebooted into Xen.
 started because you still have to configure the dom0 tools.  The  There will be no domUs, and none can be started because you still have
 daemons which should be run vary with Xen version and with whether one  to configure the dom0 tools.  The daemons which should be run vary
 is using xm or xl.  Note that xend is for supporting "xm", and should  with Xen version and with whether one is using xm or xl.  Note that
 only be used if you plan on using "xm".  Do NOT enable xend if you  xend is for supporting "xm", and should only be used if you plan on
 plan on using "xl" as it will cause problems.  using "xm".  Do NOT enable xend if you plan on using "xl" as it will
   cause problems.
   
 The installation of NetBSD should already have created devices for xen  The installation of NetBSD should already have created devices for xen
 (xencons, xenevt), but if they are not present, create them:  (xencons, xenevt), but if they are not present, create them:

Removed from v.1.75  
changed lines
  Added in v.1.76


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb