Diff for /wikisrc/ports/xen/howto.mdwn between versions 1.53 and 1.60

version 1.53, 2014/12/26 23:58:18 version 1.60, 2014/12/28 18:31:50
Line 2  Introduction Line 2  Introduction
 ============  ============
   
 [![[Xen  [![[Xen
 screenshot]](http://www.netbsd.org/gallery/in-Action/hubertf-xens.png)](../../gallery/in-Action/hubertf-xen.png)  screenshot]](http://www.netbsd.org/gallery/in-Action/hubertf-xens.png)](http://www.netbsd.org/gallery/in-Action/hubertf-xen.png)
   
 Xen is a virtual machine monitor or hypervisor for x86 hardware  Xen is a hypervisor (or virtual machine monitor) for x86 hardware
 (i686-class or higher), which supports running multiple guest  (i686-class or higher), which supports running multiple guest
 operating systems on a single physical machine.  With Xen, one uses  operating systems on a single physical machine.  Xen is a Type 1 or
 the Xen kernel to control the CPU, memory and console, a dom0  bare-metal hypervisor; one uses the Xen kernel to control the CPU,
 operating system which mediates access to other hardware (e.g., disks,  memory and console, a dom0 operating system which mediates access to
 network, USB), and one or more domU operating systems which operate in  other hardware (e.g., disks, network, USB), and one or more domU
 an unprivileged virtualized environment.  IO requests from the domU  operating systems which operate in an unprivileged virtualized
 systems are forwarded by the hypervisor (Xen) to the dom0 to be  environment.  IO requests from the domU systems are forwarded by the
 fulfilled.  hypervisor (Xen) to the dom0 to be fulfilled.
   
 Xen supports two styles of guests.  The original is Para-Virtualized  Xen supports two styles of guests.  The original is Para-Virtualized
 (PV) which means that the guest OS does not attempt to access hardware  (PV) which means that the guest OS does not attempt to access hardware
Line 49  specific PCI devices can be made availab Line 49  specific PCI devices can be made availab
 of the dom0.  This can be useful to let a domU run X11, or access some  of the dom0.  This can be useful to let a domU run X11, or access some
 network interface or other peripheral.  network interface or other peripheral.
   
   NetBSD used to support Xen2; this has been removed.
   
 Prerequisites  Prerequisites
 -------------  -------------
   
Line 63  architecture.  This HOWTO presumes famil Line 65  architecture.  This HOWTO presumes famil
 on i386/amd64 hardware and installing software from pkgsrc.  on i386/amd64 hardware and installing software from pkgsrc.
 See also the [Xen website](http://www.xenproject.org/).  See also the [Xen website](http://www.xenproject.org/).
   
 History  
 -------  
   
 NetBSD used to support Xen2; this has been removed.  
   
 Before NetBSD's native bootloader could support Xen, the use of  
 grub was recommended.  If necessary, see the  
 [old grub information](/ports/xen/howto-grub/).  
   
 Versions of Xen and NetBSD  Versions of Xen and NetBSD
 ==========================  ==========================
   
Line 302  As with non-Xen systems, you should have Line 295  As with non-Xen systems, you should have
 kernel that works without Xen) and fallback versions of the non-Xen  kernel that works without Xen) and fallback versions of the non-Xen
 kernel, Xen, and the dom0 kernel.  kernel, Xen, and the dom0 kernel.
   
   Using grub (historic)
   ---------------------
   
   Before NetBSD's native bootloader could support Xen, the use of
   grub was recommended.  If necessary, see the
   [old grub information](/ports/xen/howto-grub/).
   
 The [HowTo on Installing into  The [HowTo on Installing into
 RAID-1](http://mail-index.NetBSD.org/port-xen/2006/03/01/0010.html)  RAID-1](http://mail-index.NetBSD.org/port-xen/2006/03/01/0010.html)
 explains how to set up booting a dom0 with Xen using grub with  explains how to set up booting a dom0 with Xen using grub with
Line 339  For 4.1 (and thus xm; xl is believed not Line 339  For 4.1 (and thus xm; xl is believed not
         xencommons=YES          xencommons=YES
         xend=YES          xend=YES
   
 TODO: Explain why if xm is preferred on 4.1, rc.d/xendomains has xl.  (If you are using xentools41 from before 2014-12-26, change
 Or fix the package.  rc.d/xendomains to use xm rather than xl.)
   
 For 4.2 with xm, add to rc.conf  For 4.2 with xm, add to rc.conf
   
Line 407  and adjusts /etc. Line 407  and adjusts /etc.
 Note that one must update both the non-Xen kernel typically used for  Note that one must update both the non-Xen kernel typically used for
 rescue purposes and the DOM0 kernel used with Xen.  rescue purposes and the DOM0 kernel used with Xen.
   
 To convert from grub to /boot, install an mbr bootblock with fdisk,  Converting from grub to /boot
 bootxx_ with installboot, /boot and /boot.cfg.  This really should be  -----------------------------
 no different than completely reinstalling boot blocks on a non-Xen  
 system.  These instructions were [TODO: will be] used to convert a system from
   grub to /boot.  The system was originally installed in February of
   2006 with a RAID1 setup and grub to boot Xen 2, and has been updated
   over time.  Before these commands, it was running NetBSD 6 i386, Xen
   4.1 and grub, much like the message linked earlier in the grub
   section.
   
           # Install mbr bootblocks on both disks. 
           fdisk -i /dev/rwd0d
           fdisk -i /dev/rwd1d
           # Install NetBSD primary boot loader (/ is FFSv1) into RAID1 components.
           installboot -v /dev/rwd0d /usr/mdec/bootxx_ffsv1
           installboot -v /dev/rwd1d /usr/mdec/bootxx_ffsv1
           # Install secondary boot loader
           cp -p /usr/mdec/boot /
           # Create boog.cfg following earlier guidance:
           menu=Xen:load /netbsd-XEN3PAE_DOM0.gz console=pc;multiboot /xen.gz dom0_mem=256M
           menu=Xen.ok:load /netbsd-XEN3PAE_DOM0.ok.gz console=pc;multiboot /xen.ok.gz dom0_mem=256M
           menu=GENERIC:boot
           menu=GENERIC single-user:boot -s
           menu=GENERIC.ok:boot netbsd.ok
           menu=GENERIC.ok single-user:boot netbsd.ok -s
           menu=Drop to boot prompt:prompt
           default=1
           timeout=30
   
   TODO: actually do this and fix it if necessary.
   
 Updating Xen versions  Updating Xen versions
 ---------------------  ---------------------
Line 431  Unprivileged domains (domU) Line 457  Unprivileged domains (domU)
 This section describes general concepts about domUs.  It does not  This section describes general concepts about domUs.  It does not
 address specific domU operating systems or how to install them.  The  address specific domU operating systems or how to install them.  The
 config files for domUs are typically in /usr/pkg/etc/xen, and are  config files for domUs are typically in /usr/pkg/etc/xen, and are
 typically named so that the file anme, domU name and the domU's host  typically named so that the file name, domU name and the domU's host
 name match.  name match.
   
 The domU is provided with cpu and memory by Xen, configured by the  The domU is provided with cpu and memory by Xen, configured by the
Line 505  anyplace, reasonable places to store dom Line 531  anyplace, reasonable places to store dom
 (so they are near the dom0 kernel), in /usr/pkg/etc/xen (near the  (so they are near the dom0 kernel), in /usr/pkg/etc/xen (near the
 config files), or in /u0/xen (where the vdisks are).  config files), or in /u0/xen (where the vdisks are).
   
   Note that loading the domU kernel from the dom0 implies that boot
   blocks, /boot, /boot.cfg, and so on are all ignored in the domU.
 See the VPS section near the end for discussion of alternate ways to  See the VPS section near the end for discussion of alternate ways to
 obtain domU kernels.  obtain domU kernels.
   
Line 840  npf, run IPsec, or any other reason why  Line 868  npf, run IPsec, or any other reason why 
 their kernel.  their kernel.
   
 One approach is to have an adminstrative interface to upload a kernel,  One approach is to have an adminstrative interface to upload a kernel,
 or to select from a prepopulated list.  or to select from a prepopulated list.  Other approaches are py-grub
   (deprecated) and pvgrub, which are ways to have a bootloader obtain a
   kernel from the domU filesystem.  This is closer to a regular physical
   computer, where someone who controls a machine can replace the kernel.
   
 Otehr approaches are pvgrub and py-grub, which are ways to start a  py-grub
 bootloader from the dom0 instead of the actual domU kernel, and for  -------
 that loader to then load a kernel from the domU filesystem.  This is  
 closer to a regular physical computer, where someone who controls a  py-grub runs in the dom0 and looks into the domU filesystem.  This
 machine can replace the kernel.  implies that the domU must have a kernel in a filesystem in a format
   known to py-grub.  As of 2014, py-grub seems to be of mostly historical interest.
   
   pvgrub
   ------
   
   pvgrub is a version of grub that uses PV operations instead of BIOS
   calls.  It is booted from the dom0 as the domU kernel, and then reads
   /grub/menu.lst and loads a kernel from the domU filesystem.
   
   [prgmr.com](http://prgmr.com/) uses this approach to let users choose
   their own operating system and kernel.  See then [prgmr.com NetBSD
   HOWTO](http://wiki.prgmr.com/mediawiki/index.php/NetBSD_as_a_DomU).
   
   Typically one has an ext2 or FAT partition for the kernel, so that
   grub can understand it, which leads to /netbsd not being the actual
   kernel.  One must remember to update the special boot partiion.
   
 prmgr and pvgrub  Amazon
 ----------------  ------
   
 TODO: Perhaps reference panix, prmgr, amazon as interesting examples.  TODO: add link to NetBSD amazon howto.
 Explain what prmgr does.  
   
 Using npf  Using npf
 ---------  ---------
Line 860  Using npf Line 906  Using npf
 In standard kernels, npf is a module, and thus cannot be loadeed in a  In standard kernels, npf is a module, and thus cannot be loadeed in a
 DOMU kernel.  DOMU kernel.
   
 TODO: explain how to compile npf into a custom kernel, answering:  TODO: explain how to compile npf into a custom kernel, answering (but
   note that the problem was caused by not booting the right kernel):
 http://mail-index.netbsd.org/netbsd-users/2014/12/26/msg015576.html  http://mail-index.netbsd.org/netbsd-users/2014/12/26/msg015576.html

Removed from v.1.53  
changed lines
  Added in v.1.60


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb