--- wikisrc/ports/xen/howto.mdwn 2014/12/26 20:25:19 1.49 +++ wikisrc/ports/xen/howto.mdwn 2014/12/26 20:28:45 1.50 @@ -744,138 +744,9 @@ tty to the xen console. Creating an unprivileged Solaris domain (domU) ---------------------------------------------- -Download an Opensolaris [release](http://opensolaris.org/os/downloads/) -or [development snapshot](http://genunix.org/) DVD image. Attach the DVD -image to a MAN.VND.4 device. Copy the kernel and ramdisk filesystem -image to your dom0 filesystem. - - dom0# mkdir /root/solaris - dom0# vnconfig vnd0 osol-1002-124-x86.iso - dom0# mount /dev/vnd0a /mnt - - ## for a 64-bit guest - dom0# cp /mnt/boot/amd64/x86.microroot /root/solaris - dom0# cp /mnt/platform/i86xpv/kernel/amd64/unix /root/solaris - - ## for a 32-bit guest - dom0# cp /mnt/boot/x86.microroot /root/solaris - dom0# cp /mnt/platform/i86xpv/kernel/unix /root/solaris - - dom0# umount /mnt - - -Keep the MAN.VND.4 configured. For some reason the boot process stalls -unless the DVD image is attached to the guest as a "phy" device. Create -an initial configuration file with the following contents. Substitute -*/dev/wd0k* with an empty partition at least 8 GB large. - - memory = 640 - name = 'solaris' - disk = [ 'phy:/dev/wd0k,0,w' ] - disk += [ 'phy:/dev/vnd0d,6:cdrom,r' ] - vif = [ 'bridge=bridge0' ] - kernel = '/root/solaris/unix' - ramdisk = '/root/solaris/x86.microroot' - # for a 64-bit guest - extra = '/platform/i86xpv/kernel/amd64/unix - nowin -B install_media=cdrom' - # for a 32-bit guest - #extra = '/platform/i86xpv/kernel/unix - nowin -B install_media=cdrom' - - -Start the guest. - - dom0# xm create -c solaris.cfg - Started domain solaris - v3.3.2 chgset 'unavailable' - SunOS Release 5.11 Version snv_124 64-bit - Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved. - Use is subject to license terms. - Hostname: opensolaris - Remounting root read/write - Probing for device nodes ... - WARNING: emlxs: ddi_modopen drv/fct failed: err 2 - Preparing live image for use - Done mounting Live image - - -Make sure the network is configured. Note that it can take a minute for -the xnf0 interface to appear. - - opensolaris console login: jack - Password: jack - Sun Microsystems Inc. SunOS 5.11 snv_124 November 2008 - jack@opensolaris:~$ pfexec sh - sh-3.2# ifconfig -a - sh-3.2# exit - - -Set a password for VNC and start the VNC server which provides the X11 -display where the installation program runs. - - jack@opensolaris:~$ vncpasswd - Password: solaris - Verify: solaris - jack@opensolaris:~$ cp .Xclients .vnc/xstartup - jack@opensolaris:~$ vncserver :1 - - -From a remote machine connect to the VNC server. Use `ifconfig xnf0` on -the guest to find the correct IP address to use. - - remote$ vncviewer 172.18.2.99:1 - - -It is also possible to launch the installation on a remote X11 display. - - jack@opensolaris:~$ export DISPLAY=172.18.1.1:0 - jack@opensolaris:~$ pfexec gui-install - - -After the GUI installation is complete you will be asked to reboot. -Before that you need to determine the ZFS ID for the new boot filesystem -and update the configuration file accordingly. Return to the guest -console. - - jack@opensolaris:~$ pfexec zdb -vvv rpool | grep bootfs - bootfs = 43 - ^C - jack@opensolaris:~$ - - -The final configuration file should look like this. Note in particular -the last line. - - memory = 640 - name = 'solaris' - disk = [ 'phy:/dev/wd0k,0,w' ] - vif = [ 'bridge=bridge0' ] - kernel = '/root/solaris/unix' - ramdisk = '/root/solaris/x86.microroot' - extra = '/platform/i86xpv/kernel/amd64/unix -B zfs-bootfs=rpool/43,bootpath="/xpvd/xdf@0:a"' - - -Restart the guest to verify it works correctly. - - dom0# xm destroy solaris - dom0# xm create -c solaris.cfg - Using config file "./solaris.cfg". - v3.3.2 chgset 'unavailable' - Started domain solaris - SunOS Release 5.11 Version snv_124 64-bit - Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved. - Use is subject to license terms. - WARNING: emlxs: ddi_modopen drv/fct failed: err 2 - Hostname: osol - Configuring devices. - Loading smf(5) service descriptions: 160/160 - svccfg import warnings. See /var/svc/log/system-manifest-import:default.log . - Reading ZFS config: done. - Mounting ZFS filesystems: (6/6) - Creating new rsa public/private host key pair - Creating new dsa public/private host key pair +See possibly outdated +[Solaris domU instructions](/ports/xen/howto-solaris/). - osol console login: - Using PCI devices in guest domains ----------------------------------