Diff for /wikisrc/ports/xen/howto.mdwn between versions 1.192 and 1.193

version 1.192, 2021/03/03 13:19:06 version 1.193, 2021/03/03 14:22:24
Line 167  menu=Xen:load /netbsd-XEN3_DOM0.gz conso Line 167  menu=Xen:load /netbsd-XEN3_DOM0.gz conso
 menu=Xen single user:load /netbsd-XEN3_DOM0.gz console=pc -s;multiboot /xen.gz dom0_mem=512M  menu=Xen single user:load /netbsd-XEN3_DOM0.gz console=pc -s;multiboot /xen.gz dom0_mem=512M
 """]]  """]]
   
 \todo Explain why console=pc is given.  Perhaps there is some notion  
 of a separate console instead of xencons.  
   
 \todo Check the single user line.  
   
 This specifies that the dom0 should have 512MB of ram, leaving the rest  This specifies that the dom0 should have 512MB of ram, leaving the rest
 to be allocated for domUs.  to be allocated for domUs.
   
Line 187  See boot_console(8).  Understand that yo Line 182  See boot_console(8).  Understand that yo
 having console setup correct for booting GENERIC before trying to  having console setup correct for booting GENERIC before trying to
 configure Xen.  configure Xen.
   
 By default, the hypervisor (Xen itself) will use \todo as the console  Generally for GENERIC, one sets the console in bootxx_ffsv1 or
   equivalent, and this is passed on to /boot (where one typically does
 By default, the NetBSD dom0 kernel will use xencons(4) (the man page  not set the console).  This configuration of bootxx_ffsv1 should also
 does not exist) as console.  be in place for Xen systems, to allow seeing messages from /boot and
   use of a keyboard to select a line from the menu.  And, one should
 To use a serial console for the Xen hypervisor, add settings as follows:  have a working boot path to GENERIC for rescue situations.
   
   With GENERIC, the boot options are passed on to /netbsd, but there is
   currently no mechanism to pass these via multiboot to the hypervisor.
   Thus, in addition to configuring the console in the boot blocks, one
   must also configure it for Xen.
   
   By default, the hypervisor (Xen itself) will use some sort of vga
   device as the console, much like GENERIC uses by default.  The vga
   console is relinquished at the conclusion of hypervisor boot, before
   the dom0 is started.
   
   \todo Explain if there is any notion of input to the Xen console;
   there is something about 3 CTRL-As in a row.  Perhaps this is about
   the serial console which is not relinquished?
   
   The hypervisor can be configured to use a serial port console, e.g.
 [[!template id=filecontent name="/boot.cfg" text="""  [[!template id=filecontent name="/boot.cfg" text="""
 menu=Xen:load /netbsd-XEN3_DOM0.gz;multiboot /xen.gz dom0_mem=512M console=com1 com1=9600,8n1  menu=Xen:losad /netbsd-XEN3_DOM0.gz console=com0;multiboot /xen.gz dom0_mem=512M console=com1 com1=9600,8n1
 """]]  """]]
   This exampulee uses the first serial port (Xen counts from 1; this is
 which will use the first serial port for Xen (which counts starting  what NetBSD would call com0), and sets speed and parity.  (The dom0 is
 from 1, unlike NetBSD which counts starting from 0), forcing  then configured to use the same serial port in this example.)
 speed/parity.  Because the NetBSD command line lacks a  
 "console=pc" argument, it will use the default "xencons" console device,  One also configures the console for the dom0.  While one might expect
 which directs the console I/O through Xen to the same console device Xen  console=pc to be default, following behavior of GENERIC, a hasty read
 itself uses (in this case, the serial port).  of the code suggests there is no default and booting without a
   selected console might lead to a panic.  Also, there is merit in
 \todo Explain why boot.cfg shows forcing the dom0 console also,  explicit configuration.  Therefore the standard approach is to place
 separately from the hypervisor console.  console=pc as part of the load statement for the dom0 kernel, or
   alternatively console=com0.
   
   The NetBSD dom0 kernel will attach xencons(4) (the man page does not
   exist), but this is not used as a console.  It is used to obtain the
   messages from the hypervisor's console; run `xl dmesg` to see them.
   
 ### Tuning  ### Tuning
   

Removed from v.1.192  
changed lines
  Added in v.1.193


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb