Diff for /wikisrc/ports/xen/howto.mdwn between versions 1.182 and 1.184

version 1.182, 2020/11/15 14:47:55 version 1.184, 2020/11/15 14:56:44
Line 15  website](http://www.xenproject.org/). Line 15  website](http://www.xenproject.org/).
   
 [[!toc]]  [[!toc]]
   
 # Overview: Versions of Xen, Styles, NetBSD  # Overview
   
 The basic concept of Xen is that the hypervisor (xenkernel) runs on  The basic concept of Xen is that the hypervisor (xenkernel) runs on
 the hardware, and runs a privileged domain ("dom0") that can access  the hardware, and runs a privileged domain ("dom0") that can access
Line 60  is required.  Thus, a dom0 can be PVHv2. Line 60  is required.  Thus, a dom0 can be PVHv2.
 The source code uses PVH and config files use pvh; this refers to PVHv2.  The source code uses PVH and config files use pvh; this refers to PVHv2.
 See [PVH(v2)](https://wiki.xenproject.org/wiki/PVH_(v2\)_Domu).  See [PVH(v2)](https://wiki.xenproject.org/wiki/PVH_(v2\)_Domu).
   
   
 At system boot, the dom0 kernel is loaded as a module with Xen as the kernel.  At system boot, the dom0 kernel is loaded as a module with Xen as the kernel.
 The dom0 can start one or more domUs.  (Booting is explained in detail  The dom0 can start one or more domUs.  (Booting is explained in detail
 in the dom0 section.)  in the dom0 section.)
Line 86  matching versions. Line 85  matching versions.
 Versions available in pkgsrc:  Versions available in pkgsrc:
   
 [[!table data="""  [[!table data="""
 Xen Version     |Package Name   |Xen CPU Support        |xm?    |EOL'ed By Upstream  Xen Version     |Package Name   |Xen CPU Support        |EOL'ed By Upstream
 4.11            |xenkernel411   |x86_64                 |       |No  4.11            |xenkernel411   |x86_64                 |No
 4.13            |xenkernel413   |x86_64                 |       |No  4.13            |xenkernel413   |x86_64                 |No
 """]]  """]]
   
 See also the [Xen Security Advisory page](http://xenbits.xen.org/xsa/).  See also the [Xen Security Advisory page](http://xenbits.xen.org/xsa/).
Line 107  because the hypercall interface has rema Line 106  because the hypercall interface has rema
 Older Xen had a python-based management tool called xm, now replaced  Older Xen had a python-based management tool called xm, now replaced
 by xl.  by xl.
   
   ## NetBSD versions
   
   Xen has been supported in NetBSD for a long time, at least since 2005.
   Initially Xen was PV only.
   
   NetBSD 8 and up support PV and HVM modes.
   
   Support for PVHVM and PVH is available only in NetBSD-current.
   
 # Creating a dom0  # Creating a dom0
   
 In order to install a NetBSD as a dom0, one must first install a normal  In order to install a NetBSD as a dom0, one must first install a normal
Line 506  It is also desirable to add Line 514  It is also desirable to add
         powerd=YES          powerd=YES
   
 in rc.conf. This way, the domain will be properly shut down if  in rc.conf. This way, the domain will be properly shut down if
 `xm shutdown -R` or `xm shutdown -H` is used on the dom0.  `xl shutdown -R` or `xl shutdown -H` is used on the dom0.
   \todo Check the translation to xl.
   
 It is not strictly necessary to have a kernel (as /netbsd) in the domU  It is not strictly necessary to have a kernel (as /netbsd) in the domU
 file system.  However, various programs (e.g. netstat) will use that  file system.  However, various programs (e.g. netstat) will use that

Removed from v.1.182  
changed lines
  Added in v.1.184


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb