Diff for /wikisrc/ports/sandpoint/instsynology.mdwn between versions 1.1 and 1.2

version 1.1, 2013/10/31 21:05:10 version 1.2, 2014/01/06 14:06:14
Line 1 Line 1
   <a name="introduction"></a>
 Introduction  Introduction
 ============  ============
   
Line 119  To install OS/sandpoint you will have to Line 120  To install OS/sandpoint you will have to
 the serial console, and connect a serial converter from TTL to RS232  the serial console, and connect a serial converter from TTL to RS232
 signal levels.  signal levels.
   
   <a name="serial_access"></a>
 Accessing the serial interface  Accessing the serial interface
 ==============================  ==============================
   
   <a name="locate_header"></a>
 Locate the serial header  Locate the serial header
 ------------------------  ------------------------
   
Line 133  models: Line 136  models:
 <table>  <table>
 <tbody>  <tbody>
 <tr class="odd">  <tr class="odd">
 <td align="left"><img src="../../images/ports/sandpoint/syno_ser_header.jpg" alt=" Serial header in a DS-101g+ " /></td>  <td align="left"><img src="http://www.netbsd.org/images/ports/sandpoint/syno_ser_header.jpg" alt=" Serial header in a DS-101g+ " /></td>
 <td align="left"><img src="../../images/ports/sandpoint/syno_ser_header106.jpg" alt=" Serial header in a DS-106j " /></td>  <td align="left"><img src="http://www.netbsd.org/images/ports/sandpoint/syno_ser_header106.jpg" alt=" Serial header in a DS-106j " /></td>
 </tr>  </tr>
 </tbody>  </tbody>
 </table>  </table>
Line 168  models: Line 171  models:
 </tr>  </tr>
 </tbody>  </tbody>
 </table></td>  </table></td>
 <td align="left"><img src="../../images/ports/sandpoint/syno_ser_pins.jpg" alt="Header pin assignments" /></td>  <td align="left"><img src="http://www.netbsd.org/images/ports/sandpoint/syno_ser_pins.jpg" alt="Header pin assignments" /></td>
 </tr>  </tr>
 </tbody>  </tbody>
 </table>  </table>
   
 Watch out for the thick, white angle, which marks pin 1.  Watch out for the thick, white angle, which marks pin 1.
   
   <a name="serial_cable"></a>
 Connect a serial cable  Connect a serial cable
 ----------------------  ----------------------
   
Line 185  instructions how to build such a convert Line 189  instructions how to build such a convert
   
 -   Serial adapter for 3.3V TTL  -   Serial adapter for 3.3V TTL
   
 Serial adapter installed  <img src="http://www.netbsd.org/images/ports/sandpoint/syno_ser_adapter.jpg" alt="Serial adapter installed" /></td>
   
 This picture shows the installed serial adapter. When the installation  This picture shows the installed serial adapter. When the installation
 is completed, and the Diskstation is available over the network, you can  is completed, and the Diskstation is available over the network, you can
 remove the serial adapter again. You will only need it in emergency  remove the serial adapter again. You will only need it in emergency
Line 197  standard RS232 interface and for an USB  Line 202  standard RS232 interface and for an USB 
 -   RS232 level shifter / breakout board (MAX3232 based)  -   RS232 level shifter / breakout board (MAX3232 based)
 -   USB to TLL serial level shifter / breakout board (FT232 based)  -   USB to TLL serial level shifter / breakout board (FT232 based)
   
   <a name="install"></a>
 First installation  First installation
 ==================  ==================
   
   <a name="firmware_access"></a>
 Accessing the Firmware  Accessing the Firmware
 ----------------------  ----------------------
   
Line 253  In old firmwares (2005) you have three s Line 260  In old firmwares (2005) you have three s
     Net:   SK98#0      Net:   SK98#0
     Press Ctrl+C to abort autoboot in 1 second      Press Ctrl+C to abort autoboot in 1 second
   
   <a name="altboot"></a>
 altboot  altboot
 -------  -------
   
Line 327  finished. Line 335  finished.
     Type ? or HELP for help.      Type ? or HELP for help.
     (/tmp/) C-Kermit>      (/tmp/) C-Kermit>
   
   <a name="altboot_install"></a>
 Boot the INSTALL kernel with altboot  Boot the INSTALL kernel with altboot
 ------------------------------------  ------------------------------------
   
Line 435  the kernel via network and launches it: Line 444  the kernel via network and launches it:
   
 Just follow the usual procedure to install a OS system.  Just follow the usual procedure to install a OS system.
   
 Sandpoint installation window  <img src="http://www.netbsd.org/images/ports/sandpoint/install_window.jpg" alt="Sandpoint installation window" /></td>
   
   <a name="post_install"></a>
 Post installation steps  Post installation steps
 =======================  =======================
   

Removed from v.1.1  
changed lines
  Added in v.1.2


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb