--- wikisrc/ports/i386.mdwn	2012/06/17 17:23:44	1.1
+++ wikisrc/ports/i386.mdwn	2014/04/18 20:46:30	1.5
@@ -1,12 +1,12 @@
 [[!template id=port
 port="i386"
-cur_rel="5.1.2"
-future_rel="6.0"
-changes_cur="5.0"
-changes_future="6.0"
+cur_rel="6.1.4"  
+future_rel="7.0"
+changes_cur="6.0"
+changes_future="7.0"
 thumbnail="http://www.netbsd.org/images/ports/i386/header.gif"
 about="""
-NetBSD/i386 is the port of NetBSD to the IBM PCs and PC clones with i386-family processors. It runs on ISA (AT-bus), EISA, PCI, VL-bus and MCA systems, with or without math coprocessors.
+NetBSD/i386 is the port of NetBSD to generic machines ("PC clones") with 32-bit x86-family processors. It runs on PCI-Express, PCI, and CardBus systems, as well as older hardware with PCMCIA, VL-bus, EISA, MCA, and ISA (AT-bus) interfaces, with or without math coprocessors.
 
 NetBSD/i386 was the original port of NetBSD, and was initially released as [NetBSD 0.8](http://www.netbsd.org/releases/formal-0.8/) in 1993.
 
@@ -14,35 +14,35 @@ Frank van der Linden is the current port
 
 """
 supported_hardware="""
-The minimal configuration for a NetBSD/i386 system requires 4M of RAM and about
-40M of disk space. For a full installation (including source and X11), at least
-8M of RAM and 200M of disk space are recommended.
-Any i486 or better CPU should work - genuine Intel or a compatible such as
-Cyrix, AMD, or NexGen.
+The minimal configuration for a NetBSD/i386 system requires 4M of RAM and about 40M of disk space.
+
+For a full installation (including source and X11), at least 8M of RAM and 200M of disk space are recommended.
+
+Any i486 or better CPU should work - genuine Intel or a compatible such as Cyrix, AMD, or NexGen.
+
 Devices (driver names in parenthesis) supported by NetBSD/i386 include:
-* Machine-independent drivers for ISA devices
-* Machine-independent drivers for PCI devices
-* Machine-independent drivers for EISA devices
-* Machine-independent drivers for PCMCIA devices
-* Machine-independent drivers for Cardbus devices
-* Machine-independent drivers for ATA devices
-* Machine-independent drivers for SCSI and ATAPI devices.
-* Machine-independent drivers for USB devices
-* Machine-independent drivers for MII devices (IEEE 802.3 Media Independent
-  Interface, typically used for physical media interfaces for FastEthernet
-  controllers)
-* Machine-independent drivers for MCA devices
-* Standard PC floppy controllers (fdc) and drives (fd)
-* Adaptec 284x VLbus SCSI host adapters (ahc)
-* NCR 53C80 port-mapped and memory-mapped SCSI host adapters (nca)
-* The PC speaker (pcppi and sysbeep)
-* Logitech bus mouse (lms)
-* Microsoft InPort mouse (mms)
-* PS/2 mouse (pms)
-* Joysticks on game ports (joy)
-* MDA, CGA, VGA, SVGA and HGC Display Adapters (pccons or wscons). Note:
-  not all of the display adapters supported by NetBSD/i386 will work with
-  X. See the XFree86 FAQ for more information.
+
+ * Machine-independent drivers for ISA devices
+ * Machine-independent drivers for PCI devices
+ * Machine-independent drivers for EISA devices
+ * Machine-independent drivers for PCMCIA devices
+ * Machine-independent drivers for Cardbus devices
+ * Machine-independent drivers for ATA devices
+ * Machine-independent drivers for SCSI and ATAPI devices.
+ * Machine-independent drivers for USB devices
+ * Machine-independent drivers for MII devices (IEEE 802.3 Media Independent Interface, typically used for physical media interfaces for FastEthernet controllers)
+ * Machine-independent drivers for MCA devices
+ * Standard PC floppy controllers (fdc) and drives (fd)
+ * Adaptec 284x VLbus SCSI host adapters (ahc)
+ * NCR 53C80 port-mapped and memory-mapped SCSI host adapters (nca)
+ * The PC speaker (pcppi and sysbeep)
+ * Logitech bus mouse (lms)
+ * Microsoft InPort mouse (mms)
+ * PS/2 mouse (pms)
+ * Joysticks on game ports (joy)
+ * MDA, CGA, VGA, SVGA and HGC Display Adapters (pccons or wscons).
+     *  not all of the display adapters supported by NetBSD/i386 will work with X. See the XFree86 FAQ for more information.
 """
+
 ]]
 [[!tag tier1port]]