Diff for /wikisrc/ports/hp700.mdwn between versions 1.9 and 1.10

version 1.9, 2015/10/08 06:42:53 version 1.10, 2015/10/09 08:24:55
Line 1 Line 1
 [[!template id=port  [[!meta redir=hppa]]
 port="hp700"  
 cur_rel="7.0"    
 future_rel="7.0"  
 changes_cur="6.0"  
 changes_future="7.0"  
 thumbnail="http://www.netbsd.org/images/ports/hp700/715.gif"  
 about="""  
 NetBSD/hp700 is the port of NetBSD to the Hewlett-Packard 9000 Series  
 700 workstations, which are based on HP's Precision Architecture RISC  
 (PA-RISC) CPUs. These machines superseded the HP 9000 Series 300 and 400  
 workstations, which are supported by NetBSD as NetBSD/hp300.  
   
 Nick Hudson is the maintainer of NetBSD/hp700.  
   
 The hp700 port of NetBSD was started by Matt Fredette in October 2001.  
 He started working with Michael Shalayeff's  
 [OpenBSD/hppa](http://www.openbsd.org/hppa.html) sources at that time,  
 and after much work had it booting multiuser in March of 2002. At that  
 time he began merging the port into the NetBSD tree.  
   
 """  
 supported_hardware="""  
 Supported System Models  
 -----------------------  
   
 NetBSD/hp700 is known to support the following system models (more may  
 work, but additional models have not been tested yet):  
   
 -   Machines based on the PA7100/PA7150 (PCXT, PA-RISC 1.1b) CPU  
   
     -   HP 9000 715/33, 715/50, 715/75  
     -   HP 9000 725/50, 725/75  
     -   HP 9000 735/99, 735/125, 755/99, and 755/125  
     -   HP 9000 742i  
     -   HP 9000 745i/50, 745i/100, 747i/50, and 747i/100  
   
 -   Machines based on the PA7100LC (PCXL, PA-RISC 1.1c) CPU: *(see  
     [[serial console|serialconsole-712]] notes for 712/\* models)*  
   
     -   HP 9000 712/60, 712/80, and 712/100  
     -   HP 9000 715/64, 715/80, 715/100, and 715/100XC  
     -   HP 9000 725/64, and 725/100  
     -   HP 9000 743ii, and 748i  
     -   HP 9000 D200, and D210  
     -   HP 9000 D300, and D310  
     -   HP 9000 SAIC Galaxy 1000, and SAIC Galaxy 1100  
     -   HP 9000 E25, E35, E45, and E55 (no SCSI) *([[serial  
         console|hp700faq#serial_console]] only)*  
   
 -   Machines based on the PA7200 (PCXT', PA-RSC 1.1d) CPU:  
   
     -   HP9000 C100, and C110  
     -   HP9000 J200, J210, and J210CX  
     -   HP9000 Kx00, Kx10, and Kx20  
   
 -   Machines based on the PA7300LC (PCXL2, PA-RISC 1.1e) CPU:  
   
     -   HP 9000 A180, and A180C  
     -   HP 9000 B132L, B132L+, B160L, and B180L+  
     -   HP 9000 C132L, C160L  
     -   HP 9000 D220, D230  
     -   HP 9000 D320, D330  
     -   RDI PrecisionBook  
   
 -   Machines based on the PA8000 (PCXU, PA-RISC 2.0) CPU (in 32-bit  
     mode):  
   
     -   HP9000 C160, and C180  
     -   HP9000 J280, and J282  
   
 -   Machines based on the PA8200 (PCXU+, PA-RISC 2.0) CPU (in 32-bit  
     mode):  
   
     -   HP9000 C200, C230 and C240  
     -   HP9000 J2240  
   
 -   Machines based on the PA8500 (PCXW, PA-RISC 2.0) CPU (in 32-bit  
     mode):  
   
     -   HP9000 C360  
     -   HP9000 B1000, and B2000  
     -   HP9000 C3000  
     -   HP9000 J5000  
     -   HP9000 J7000  
   
 -   Machines based on the PA8600 (PCXW+, PA-RISC 2.0) CPU (in 32-bit  
     mode):  
   
     -   HP9000 B2600  
     -   HP9000 C3600  
     -   HP9000 J5600  
     -   HP9000 J6000  
     -   HP9000 J7600  
   
 -   Machines based on the PA8700 (PCXW2, PA-RISC 2.0) CPU (in 32-bit  
     mode):  
   
     -   HP9000 C3650  
     -   HP9000 C3700 and C3750  
     -   HP9000 J6700 and J6750  
   
 Supported Hardware  
 ------------------  
   
 NetBSD/hp700 currently supports the following hardware:  
   
 -   Intel 82596 ethernet (*iee*)  
 -   NCR 53C700 SCSI controller (*oosiop*)  
 -   NCR 53C710 SCSI controller (*osiop*)  
 -   NCR 53C720 SCSI controller (*siop*)  
 -   NCR/Symbios Logic 53c810, 53c810A, 53c815, 53c820, 53c825, 53c825A,  
     53c860, 53c875, 53c875J, 53c885, 53c895, and 53c896 (*siop/esiop*)  
 -   Qlogic ISP-1020, ISP-1040, ISP-1080 (LVD), and ISP-2100  
     (FibreChannel) (*isp*)  
 -   Digital 21x4x and compatible Ethernet (*tlp*)  
 -   Intel EtherExpress Pro family Ethernet (*fxp*)  
 -   NE2000 and compatible Ethernet (*ne*)  
 -   RealTek RTL8129/8139 based Ethernet (*rtk*)  
 -   National Semiconductor DP83815 based Ethernet (*sip*)  
 -   ns16550a serial controller (*com*)  
 -   SGC Framebuffers which are configured via the Boot ROM (*sti*)  
 -   PS/2 style keyboard (*pckbd*)  
 -   PS/2 style mouse (*pms*)  
 -   Parallel port (*lpt*)  
 -   CS4215 audio (*harmony*)  
 -   VIA and ALI USB 2.0 host controllers (*ohci/ehci*)  
 -   USB mass storage devices (*umass*)  
 -   Realtek RTL8150L USB Ethernet (*url*)  
 -   Dino and Cujo Host/PCI bridges (*dino*)  
 -   Lasi I/O subsystem (*lasi*)  
 -   HIL keyboard (*hilkbd*)  
 -   HIL mouse (*hilms*)  
   
 """  
 additional="""  
 #### Other sources of information ([top](#general))  
   
 -   [[hp700 FAQ|hp700faq]]  
 -   [OpenBSD/hppa](http://www.openbsd.org/hppa.html)  
 -   [PA-RISC Linux Development  
     Project](http://parisc-linux.org/index.html)  
 -   [The Cypher HP PA-RISC Project page](http://www.openpa.net/) (good  
     info on hp700 machines)  
 -   [Utah PA-RISC  
     Mach/Lites/4.4](http://www.cs.utah.edu/flux/mach4-parisc/html/pamach.html)  
     (obsolete)  
 -   [MkLinux for HP  
     PA-RISC](ftp://ftp.cirr.com/pub/hppa/mklinux/mkpa.html) (obsolete)  
 -   [HPBSD: Utah's 4.3bsd port for HP9000 series  
     machines](http://www.flux.utah.edu/~mike/hpbsd/hpbsd.html)  
     (obsolete)  
 -   [HP Workstation Documentation  
     Archive](http://www.hp.com/workstations/support/archive/) (some  
     manuals for Series 700 machines)  
 -   [Netbooting  
     NetBSD/hp700](../../docs/network/netboot/intro.hp700.html).  
 -   [General NetBSD Documentation](../../docs/) - for questions not  
     specific to NetBSD/hp700.  
   
 """  
   
 ]]  
 [[!tag tier2port]]  

Removed from v.1.9  
changed lines
  Added in v.1.10


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb