Diff for /wikisrc/ports/hp300faq.mdwn between versions 1.5 and 1.6

version 1.5, 2014/01/13 09:39:22 version 1.6, 2014/01/13 09:43:28
Line 268  SCSI drive at address 6 (7 is the system Line 268  SCSI drive at address 6 (7 is the system
 It is also possible to configure the Boot ROM to default to a specific  It is also possible to configure the Boot ROM to default to a specific
 device from the configuration menu.  device from the configuration menu.
   
 ## Switching your Series 400 machine from Domain to "HP-UX Compatible Boot Mode"  ## Switching your Series 400 machine from Domain to "HP-UX Compatible Boot Mode"<a name="domaintohpux"></a>
   
 This step is necessary, since NetBSD can only boot a Series 400 machine  This step is necessary, since NetBSD can only boot a Series 400 machine
 when it's set up in "HP-UX Compatible Boot Mode". If, when you power on  when it's set up in "HP-UX Compatible Boot Mode". If, when you power on
Line 414  on your system. Line 414  on your system.
   
 Now, all console messages will be sent over the serial port at 9600 bps,  Now, all console messages will be sent over the serial port at 9600 bps,
 8 bits, no parity, 1 stop bit.  8 bits, no parity, 1 stop bit.
 <a name="serial400"></a>  
   
 ## Setting up serial console on a Series 400 machine or a 345, 362, 375, 380, 382, or 385  ## Setting up serial console on a Series 400 machine or a 345, 362, 375, 380, 382, or 385<a name="serial400"></a>
   
 This procedure does not work on the 425e, since it does not support  This procedure does not work on the 425e, since it does not support
 serial console in the Boot ROM.  serial console in the Boot ROM.

Removed from v.1.5  
changed lines
  Added in v.1.6


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb