--- wikisrc/ports/hp300.mdwn	2014/01/13 08:05:07	1.2
+++ wikisrc/ports/hp300.mdwn	2014/04/18 20:46:30	1.7
@@ -1,7 +1,8 @@
 [[!template id=port
 port="hp300"
-cur_rel="6.0"  
+cur_rel="6.1.4"  
 future_rel="7.0"
+pkg_rel="6.0"
 changes_cur="6.0"
 changes_future="7.0"
 thumbnail="http://www.netbsd.org/images/ports/hp300/320.gif"
@@ -23,7 +24,7 @@ exist.
 supported_hardware="""
 All systems with a FPU are supported in NetBSD/hp300 (this excludes the 310 and
 332). Systems marked with a "*" do not support the built-in framebuffer. You
-will need to [set up a serial console](ports/hp300faq.html#serial400) on these
+will need to [[set up a serial console|hp300faq#serial400]] on these
 machines.
 
 The minimal configuration for a NetBSD/hp300 system requires 4M of RAM and about
@@ -48,8 +49,8 @@ The minimal configuration for a NetBSD/h
 * 433s, 433t, 433dl
 
 'note'
-  > Series 400 machines must be configured in ["HP-UX Compatible Boot Mode".
-  > Follow these instructions](ports/hp300faq.html#domaintohpux) in the FAQ.
+  > Series 400 machines must be configured in [["HP-UX Compatible Boot Mode".
+  > Follow these instructions|hp300faq#domaintohpux]] in the FAQ.
 
 Some specific configurations of the above models don't support a local console.
 The 425e (and some rare 4XXt and 4XXdl machines) have their graphics device on