[BACK]Return to tegra.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports / evbarm

Diff for /wikisrc/ports/evbarm/tegra.mdwn between versions 1.28 and 1.29

version 1.28, 2015/11/11 14:56:35 version 1.29, 2015/11/12 13:21:49
Line 70  Section "Device" Line 70  Section "Device"
 EndSection  EndSection
 """]]  """]]
   
   # dmesg
   
   [[!template  id=programlisting text="""
   Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
       2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
       The NetBSD Foundation, Inc.  All rights reserved.
   Copyright (c) 1982, 1986, 1989, 1991, 1993
       The Regents of the University of California.  All rights reserved.
   
   NetBSD 7.99.21 (JETSONTK1) #258: Thu Nov 12 06:45:09 AST 2015
           jmcneill@megatron.local:/Users/jmcneill/netbsd/src/sys/arch/evbarm/compile/obj/JETSONTK1
   total memory = 2047 MB
   avail memory = 2021 MB
   sysctl_createv: sysctl_create(machine_arch) returned 17
   timecounter: Timecounters tick every 10.000 msec
   mainbus0 (root)
   cpu0 at mainbus0 core 0: 2292 MHz Cortex-A15 r3p3 (Cortex V7A core)
   cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
   cpu0: 32KB/64B 2-way L1 PIPT Instruction cache
   cpu0: 32KB/64B 2-way write-back-locking-C L1 PIPT Data cache
   cpu0: 2048KB/64B 16-way write-through L2 PIPT Unified cache
   vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
   cpu1 at mainbus0 core 1
   cpu2 at mainbus0 core 2
   cpu3 at mainbus0 core 3
   armperiph0 at mainbus0
   armgic0 at armperiph0: Generic Interrupt Controller, 192 sources (183 valid)
   armgic0: 32 Priorities, 160 SPIs, 7 PPIs, 16 SGIs
   armgtmr0 at armperiph0: ARMv7 Generic 64-bit Timer (12000 kHz)
   armgtmr0: interrupting on irq 27
   timecounter: Timecounter "armgtmr0" frequency 12000000 Hz quality 500
   tegraio0 at mainbus0: Tegra K1 (T124)
   tegracar0 at tegraio0: CAR
   tegracar0: PLLX = 2292000000 Hz
   tegracar0: PLLC = 88000000 Hz
   tegracar0: PLLE = 292968 Hz
   tegracar0: PLLU = 480000000 Hz
   tegracar0: PLLP0 = 408000000 Hz
   tegracar0: PLLD2 = 594000000 Hz
   tegragpio0 at tegraio0: GPIO
   gpio0 at tegragpio0 (A): 8 pins
   gpio1 at tegragpio0 (B): 8 pins
   gpio2 at tegragpio0 (C): 8 pins
   gpio3 at tegragpio0 (D): 8 pins
   gpio4 at tegragpio0 (E): 8 pins
   gpio5 at tegragpio0 (F): 8 pins
   gpio6 at tegragpio0 (G): 8 pins
   gpio7 at tegragpio0 (H): 8 pins
   gpio8 at tegragpio0 (I): 8 pins
   gpio9 at tegragpio0 (J): 8 pins
   gpio10 at tegragpio0 (K): 8 pins
   gpio11 at tegragpio0 (L): 8 pins
   gpio12 at tegragpio0 (M): 8 pins
   gpio13 at tegragpio0 (N): 8 pins
   gpio14 at tegragpio0 (O): 8 pins
   gpio15 at tegragpio0 (P): 8 pins
   gpio16 at tegragpio0 (Q): 8 pins
   gpiobutton0 at gpio16 pins 0: Power button
   gpio17 at tegragpio0 (R): 8 pins
   gpio18 at tegragpio0 (S): 8 pins
   gpio19 at tegragpio0 (T): 8 pins
   gpio20 at tegragpio0 (U): 8 pins
   gpio21 at tegragpio0 (V): 8 pins
   gpio22 at tegragpio0 (W): 8 pins
   gpio23 at tegragpio0 (X): 8 pins
   gpiorfkill0 at gpio23 pins 7
   gpio24 at tegragpio0 (Y): 8 pins
   gpio25 at tegragpio0 (Z): 8 pins
   gpio26 at tegragpio0 (AA): 8 pins
   gpio27 at tegragpio0 (BB): 8 pins
   gpio28 at tegragpio0 (CC): 8 pins
   gpio29 at tegragpio0 (DD): 8 pins
   gpio30 at tegragpio0 (EE): 8 pins
   tegratimer0 at tegraio0: Timers
   tegratimer0: default watchdog period is 10 seconds
   tegramc0 at tegraio0: MC
   tegrapmc0 at tegraio0: PMC
   tegraxusbpad0 at tegraio0: XUSB PADCTL
   tegrampio0 at tegraio0: MPIO
   tegrai2c0 at tegraio0 port 0: I2C1
   tegrai2c0: interrupting on irq 70
   iic0 at tegrai2c0: I2C bus
   seeprom0 at iic0 addr 0x56: AT24Cxx or compatible EEPROM: size 256
   titemp0 at iic0 addr 0x4c: TMP451
   tegrai2c1 at tegraio0 port 1: I2C2
   tegrai2c1: interrupting on irq 116
   iic1 at tegrai2c1: I2C bus
   tegrai2c2 at tegraio0 port 2: I2C3
   tegrai2c2: interrupting on irq 124
   iic2 at tegrai2c2: I2C bus
   tegrai2c3 at tegraio0 port 3: I2C4
   tegrai2c3: interrupting on irq 152
   iic3 at tegrai2c3: I2C bus
   ddc0 at iic3 addr 0x50: DDC
   tegrai2c4 at tegraio0 port 4: I2C5
   tegrai2c4: interrupting on irq 85
   iic4 at tegrai2c4: I2C bus
   as3722pmic0 at iic4 addr 0x40: AMS AS3822
   com3 at tegraio0 port 3: ns16550a, working fifo
   com3: console
   tegrartc0 at tegraio0: RTC
   sdhc2 at tegraio0 port 2: SDMMC3
   sdhc2: interrupting on irq 51
   sdhc2: SDHC 4.0, rev 3, 32-bit ADMA2, 204000 kHz, HS SDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1, 4096 byte blocks
   sdmmc2 at sdhc2 slot 0
   sdhc3 at tegraio0 port 3: SDMMC4
   sdhc3: interrupting on irq 63
   sdhc3: SDHC 4.0, rev 3, 32-bit ADMA2, 204000 kHz, HS SDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1, 4096 byte blocks
   sdmmc3 at sdhc3 slot 0
   ahcisata0 at tegraio0: SATA
   ahcisata0: interrupting on irq 55
   ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xe620ff01<PSC,SSC,PMD,ISS=0x2=Gen2,SAL,SALP,SSNTF,SNCQ,S64A>
   atabus0 at ahcisata0 channel 0
   hdaudio0 at tegraio0: HDA
   hdaudio0: interrupting on irq 113
   hdafg0 at hdaudio0: NVIDIA Tegra124 HDMI
   hdafg0: HDMI00 8ch: Digital Out [Jack]
   hdafg0: 8ch/0ch 44100Hz PCM16*
   audio0 at hdafg0: full duplex, playback, capture, mmap, independent
   tegracec0 at tegraio0: HDMI CEC
   tegracec0: interrupting on irq 35
   hdmicec0 at tegracec0
   tegrausbphy0 at tegraio0 port 0: USB PHY1
   ehci0 at tegraio0 port 0: USB1
   ehci0: interrupting on irq 52
   ehci0: EHCI version 1.10
   ehci0: switching to host mode
   usb0 at ehci0: USB revision 2.0
   tegrausbphy1 at tegraio0 port 1: USB PHY2
   ehci1 at tegraio0 port 1: USB2
   ehci1: interrupting on irq 53
   ehci1: EHCI version 1.10
   ehci1: switching to host mode
   usb1 at ehci1: USB revision 2.0
   tegrausbphy2 at tegraio0 port 2: USB PHY3
   ehci2 at tegraio0 port 2: USB3
   ehci2: interrupting on irq 129
   ehci2: EHCI version 1.10
   ehci2: switching to host mode
   usb2 at ehci2: USB revision 2.0
   tegrahost1x0 at tegraio0: HOST1X
   tegradrm0 at tegraio0
   drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
   drm: No driver support for vblank timestamp query.
   tegrafb0 at tegradrm0
   tegrafb0: framebuffer at 0x9ab00000, size 1280x720, depth 32, stride 5120
   wsdisplay0 at tegrafb0 kbdmux 1
   wsmux1: connecting to wsdisplay0
   wsdisplay0: screen 0-3 added (default, vt100 emulation)
   tegradrm0: info: registered panic notifier
   tegradrm0: initialized tegra 0.1.0 20151108 on minor 0
   tegrapcie0 at tegraio0: PCIE
   tegrapcie0: interrupting on irq 130
   pci0 at tegrapcie0 bus 0
   pci0: memory space enabled, rd/line, rd/mult, wr/inv ok
   ppb0 at pci0 dev 0 function 0: vendor 10de product 0e12 (rev. 0xa1)
   ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s
   ppb0: link is x1 @ 2.5GT/s
   pci1 at ppb0 bus 1
   pci1: memory space enabled, rd/line, wr/inv ok
   athn0 at pci1 dev 0 function 0athn0: Atheros AR9285
   athn0: rev 2 (1T1R), ROM rev 13, address 00:17:c4:d7:d0:58
   athn0: interrupting at irq 130
   athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
   athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
   ppb1 at pci0 dev 1 function 0: vendor 10de product 0e13 (rev. 0xa1)
   ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
   ppb1: link is x1 @ 2.5GT/s
   pci2 at ppb1 bus 2
   pci2: memory space enabled, rd/line, wr/inv ok
   re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
   re0: interrupting at irq 130
   re0: Ethernet address 00:04:4b:2f:51:a2
   re0: using 512 tx descriptors
   rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
   rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
   timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
   cpu2: 2292 MHz Cortex-A15 r3p3 (Cortex V7A core)
   cpu2: DC enabled IC enabled WB disabled EABT branch prediction enabled
   cpu2: 32KB/64B 2-way L1 PIPT Instruction cache
   cpu2: 32KB/64B 2-way write-back-locking-C L1 PIPT Data cache
   cpu2: 2048KB/64B 16-way write-through L2 PIPT Unified cache
   vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
   cpu1: 2292 MHz Cortex-A15 r3p3 (Cortex V7A core)
   cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled
   cpu1: 32KB/64B 2-way L1 PIPT Instruction cache
   cpu1: 32KB/64B 2-way write-back-locking-C L1 PIPT Data cache
   cpu1: 2048KB/64B 16-way write-through L2 PIPT Unified cache
   vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
   cpu3: 2292 MHz Cortex-A15 r3p3 (Cortex V7A core)
   cpu3: DC enabled IC enabled WB disabled EABT branch prediction enabled
   cpu3: 32KB/64B 2-way L1 PIPT Instruction cache
   cpu3: 32KB/64B 2-way write-back-locking-C L1 PIPT Data cache
   cpu3: 2048KB/64B 16-way write-through L2 PIPT Unified cache
   vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
   uhub0 at usb0: Tegra EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
   uhub0: 1 port with 1 removable, self powered
   uhub1 at usb1: Tegra EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
   uhub1: 1 port with 1 removable, self powered
   uhub2 at usb2: Tegra EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
   uhub2: 1 port with 1 removable, self powered
   sdhc3: cmd timeout error
   IPsec: Initialized Security Association Processing.
   ahcisata0 port 0: device present, speed: 3.0Gb/s
   ld0 at sdmmc3: <0x45:0x0100:SEM16G:0x00:0x0301ff34:0x000>
   ld0: 15028 MB, 7633 cyl, 64 head, 63 sec, 512 bytes/sect x 30777344 sectors
   ld0: GPT GUID: a81e231f-7b1c-c564-1473-5ac55e4b7963
   dk0 at ld0: "APP", 29360128 blocks at 94208, type: <unknown>
   ld1 at sdmmc2: <0x27:0x5048:SD64G:0x30:0x01ce4def:0x0dc>
   dk1 at ld0: "DTB", 8192 blocks at 29454336, type: <unknown>
   dk2 at ld0: "EFI", 131072 blocks at 29462528, type: <unknown>
   dk3 at ld0: "USP", 8192 blocks at 29593600, type: <unknown>
   dk4 at ld0: "TP1", 8192 blocks at 29601792, type: <unknown>
   dk5 at ld0: "TP2", 8192 blocks at 29609984, type: <unknown>
   dk6 at ld0: "TP3", 8192 blocks at 29618176, type: <unknown>
   dk7 at ld0: "WB0", 4096 blocks at 29626368, type: <unknown>
   dk8 at ld0: "UDA", 1142784 blocks at 29630464, type: <unknown>
   ld0: 8-bit width, HS200, 200.000 MHz
   ld1: 59504 MB, 7585 cyl, 255 head, 63 sec, 512 bytes/sect x 121864192 sectors
   ld1: 4-bit width, SDR104, 204.000 MHz
   wd0 at atabus0 drive 0
   wd0: <OCZ-AGILITY3>
   wd0: drive supports 16-sector PIO transfers, LBA48 addressing
   wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
   wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
   wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
   uhidev0 at uhub2 port 1 configuration 1 interface 0
   uhidev0: Logitech USB Receiver, rev 2.00/29.00, addr 2, iclass 3/1
   ukbd0 at uhidev0: 8 modifier keys, 6 key codes
   wskbd0 at ukbd0 mux 1
   wskbd0: connecting to wsdisplay0
   uhidev1 at uhub2 port 1 configuration 1 interface 1
   uhidev1: Logitech USB Receiver, rev 2.00/29.00, addr 2, iclass 3/1
   uhidev1: 17 report ids
   ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
   wsmouse0 at ums0 mux 0
   uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
   uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
   uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
   uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
   boot device: wd0
   root on wd0a dumps on wd0b
   root file system type: ffs
   kern.module.path=/stand/evbarm/7.99.21/modules
   WARNING: preposterous TOD clock time
   WARNING: using filesystem time
   WARNING: CHECK AND RESET THE DATE!
   """]]
   
 # Links  # Links
   
 - [NVIDIA Jetson TK1 development kit](https://developer.nvidia.com/jetson-tk1)  - [NVIDIA Jetson TK1 development kit](https://developer.nvidia.com/jetson-tk1)
Removed from v.1.28  
changed lines
  Added in v.1.29

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb