[[!meta title="NetBSD/evbarm on Raspberry Pi"]]
This page attempts to document and coordinate efforts towards NetBSD/evbarm on [Raspberry Pi](http://www.raspberrypi.org). All board variants are supported.
Initial, limited, Raspberry Pi support was introduced in NetBSD 6.0. NetBSD 7.0 adds complete support for the board, along with introducing support for the quad-core Raspberry Pi 2 board. Raspberry Pi 3 support was added for NetBSD 8, and backported to NetBSD 7 in July of 2017.
<small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>
# What works
## NetBSD 7 before July, 2017
- RaspberryPi 1, and 2 (including SMP)
- multi-user boot with root on SD card
- serial or graphics console (with EDID query / parsing)
- DMA controller driver and sdhc(4) support
- Audio: works. man page missing.
- I²C: works, could use enhancements, man page
- SPI: could use enhancements, man page
- GPU (VCHIQ) - 3D and video decode. man page missing.
- USB (host) - dwctwo(4)
- USB Ethernet - usmsc(4)
- X windows.
## NetBSD 7 after July, 2017 and NetBSD 8
- Raspberry Pi 3 (excluding WiFi and bluetooth)
## NetBSD current
- Raspberry Pi 3 bluetooth
- Raspberry Pi 3 new SD host controller driver
# What needs work
- USB (host); isochronous transfers.
- The automatic nightly builds on [nyftp.netbsd.org](http://nyftp.netbsd.org/pub/NetBSD-daily/) provide image files that can be used for installation. The Raspberry Pi and Pi 2 ports are part of the NetBSD 7 release.
- The 'evbarm-earmv6hf/binary/gzimg/' directory contains an rpi.img file that can be used as a single image for both boards.
- The 'evbarm-earmv7hf/binary/gzimg/' directory, as of August 6th 2015, contains an armv7.img file that is optimized for Raspberry Pi 2.
- The stable build directory will be under netbsd-7/YYYYMMDDHHMMZ/ (for example, http://nyftp.netbsd.org/pub/NetBSD-daily/netbsd-7/201412161700Z/evbarm-earmv6hf/binary/gzimg/)
- The HEAD/current directory build will be under HEAD/YYYYMMDDHHMMZ/ (for example, http://nyftp.netbsd.org/pub/NetBSD-daily/netbsd-7/201508062150Z/evbarm-earmv7hf/binary/gzimg/)
- You can build your own version of these images using (for example) './build.sh -m evbarm -a earmv6hf -u release', or './build.sh -m evbarm -a earmv7hf -u release'
- <i>gunzip and dd</i> this img to your sd card. For example,
dd if=rpi.img of=/dev/disk1
- Using a serial console
- By default the rpi.img is set to use the HDMI output; to change to using a serial console first mount rpi.img (it's a FAT filesystem)
edit cmdline.txt and remove '"console=fb"'
- Most (all?) USB-to-TTL serial adapters only connect Tx, Rx and ground, and do not connect any flow control lines. An effect of missing flow control is that you see console output, but cannot type anything. If so, adjust your serial console application's flow control settings to "none".
In Kermit, the command is "set flow none".
In minicom, run "minicom -s" and set hardware flow control to "no"
## Installation with sshramdisk image
- You may use the rpi_inst.img.gz file created by an evbarm build.
- Connect Ethernet Cable to RPI.
- After starting DHCP client, SSH login to with user "sysinst", and password "netbsd".
- Be careful to note the ip address given during DHCP so you don't lose your connection
- Also for after the sysinst is done and the system reboots
- sysinst started!
## Updating the kernel
- Build a new kernel, e.g. using build.sh. It will tell you where the ELF version of the kernel is, e.g.
Kernels built from RPI2:
- Besides the "netbsd" kernel in ELF format, there is also a "netbsd.bin" kernel that is in a format that the Raspberry can boot.
- Depending on your hardware version, copy this either to /boot/kernel.img (First generation Pi, Pi Zero hardware) or to /boot/kernel7.img (Pi 2, Pi 3 hardware)
# Wireless Networking
Note that the built-in WiFi in the RPI3 is not yet supported.
- A Realtek 802.11n USB adaptor configures as urtwn(4).
- Configure with wpa_supplicant in /etc/rc.conf -
wpa_supplicant_flags="-B -i urtwn0 -c /etc/wpa_supplicant.conf"
- A sample wpa_supplicant.conf can be found at /usr/share/examples/wpa_supplicant/wpa_supplicant.conf
## Video playback
Accelerated video playback is supported in NetBSD 7 with the [OMXPlayer](http://pkgsrc.se/multimedia/omxplayer) application and through GStreamer with the [omx](http://pkgsrc.se/multimedia/gst-plugins1-omx) plugin.
## OpenGL ES
Accelerated OpenGL ES is supported in NetBSD 7. The GL ES client libraries are included with the [misc/raspberrypi-userland](http://pkgsrc.se/misc/raspberrypi-userland) package.
## Quake 3
A Raspberry Pi optimized build of *ioquake3* is available in the [games/ioquake3-raspberrypi](http://pkgsrc.se/games/ioquake3-raspberrypi) package. To use it, the following additional resources are required:
- pak0.pk3 from Quake 3 CD
- additional pak files from the [games/ioquake3-pk3](http://pkgsrc.se/games/ioquake3-pk3) package
- read/write permissions on /dev/vchiq and /dev/wsmouse
Place the pak0.pk3 file in the /usr/pkg/lib/ioquake3/baseq3 directory.
## RetroArch / Libretro
Using [emulators/retroarch](http://pkgsrc.se/emulators/retroarch) it is possible to run many emulators at full speed the Raspberry Pi. Emulator cores for various gaming consoles are available in the [emulators/libretro-*](http://pkgsrc.se/search.php?so=libretro-) packages. To begin using retroarch:
- Install [emulators/retroarch](http://pkgsrc.se/emulators/retroarch)
- Install the libretro core for the system you would like to emulate (lets take [emulators/libretro-gambatte](http://pkgsrc.se/emulators/libretro-gambatte), a GameBoy Color emulator, as an example).
- Plug in a USB HID compatible Gamepad, such as the Logitech F710 in "DirectInput" mode (set "D/X" switch to "D").
- Create a config file for your gamepad using *retroarch-joyconfig*.
[[!template id=programlisting text="""
$ retroarch-joyconfig -o gamepad.cfg
- Launch the emulator from the command-line (no X required):
[[!template id=programlisting text="""
$ retroarch --appendconfig gamepad.cfg -L /usr/pkg/lib/libretro/gambatte_libretro.so game.gbc
# Developer notes
These notes are for people working on improvements to RPI support in NetBSD.
## Updating the firmware
You probably don't want to do this. Firmware updates can break things,
and the latest firmware that's been tested is already included in the
NetBSD build you installed.
If you're feeling adventurous (or are the port maintainer), here's what
to test whenever you try new firmware:
- OMXPlayer (and [[!template id=man name="vchiq"]])
- Serial/framebuffer console
- CPU frequency scaling
That goes for all of `rpi`.
Upstream firmware releases are
Copy all files except `kernel*.img` into `/boot` and reboot.
CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb