File:  [NetBSD Developer Wiki] / wikisrc / ports / evbarm / raspberry_pi.mdwn
Revision 1.18: download - view: text, annotated - select for diffs
Tue Jul 30 05:25:37 2013 UTC (7 years, 9 months ago) by wiki
Branches: MAIN
CVS tags: HEAD
web commit by jun: /boot is msdos partition. so s/mount/mount_msdos/ .

    1: [[!meta title="NetBSD/evbarm on Raspberry Pi"]]
    2: 
    3: [[images/raspberrypi.jpg]]
    4: 
    5: This page attempts to document and coordinate efforts towards NetBSD/evbarm on [Raspberry Pi](http://www.raspberrypi.org).
    6: 
    7: <small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>
    8: 
    9: # Installation
   10:  - Use the latest HEAD/-current which builds for install
   11:    - As the raspberry pi port is still not part the stable release, you will want to use the
   12:      HEAD branch to download installation sets.
   13:    - You may use the rpi.img file created by an arm build.
   14:    - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
   15:      - On nyftp.netbsd.org/pub/NetBSD-daily/HEAD/YYYYMMDDHHMMZ (it will look like pub/NetBSD-daily/HEAD/201305220150Z)
   16:    - 'obj/releasedir/evbarm/binary/gzimg/' if you run (for example) './build.sh -m evbarm -u release'
   17:      - <i>gunzip and dd</i> this img to your sd card.
   18: 
   19: 	   dd if=rpi.img of=/dev/disk1
   20: 
   21:  - Using a serial console
   22:    - By default the rpi.img is set to use the HDMI output; to change mount rpi.img (it's a FAT filesystem)
   23: 
   24: 	   edit cmdline.txt and remove '"console=fb"'
   25:    - proceed with the 'dd'
   26: 
   27:  - Growing the root file-system
   28:    - During the partitioning process, do not delete or format the
   29:      first MSDOS (FAT) partition, as the Raspberry pi firmware is
   30:      hard coded to boot on the SDCAD / 1st MSDOS partition / Firmware
   31:      updates and boot loader.
   32:    - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
   33:    - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text to boot into single-user mode.
   34:    - Reboot, and at the prompt to enter the passname of shell, press
   35: 	   return for the default (/bin/sh).
   36:    - At the # prompt, type
   37: 
   38:         "disklabel -i ld0" and press return.
   39:    - At the partition> prompt type "A" and press return.
   40: 
   41:            Adjust disklabel sector from 4194304 to 62333952 [n]?
   42:            Type "y" and press return.
   43:    - partition> prompt type "a" and press return.
   44: 
   45:            Filesystem type prompt, press return to use the current value (4.2BSD).
   46:            Start offset prompt, press return to use the current value.
   47:            Partition size prompt, type "$" and press return to grow the
   48:            partition to use all available free space.
   49:    - partition> prompt type "W" to save the changes to the disklabel.
   50: 
   51:            Confirm this choice by typing "y" at the Label disk prompt.
   52:            Type "Q" and press return to quit disklabel.
   53:    - At the # prompt (shell), type
   54: 
   55:            fsck -fy /dev/rld0a
   56:            resize_ffs -y /dev/rld0a
   57:    - This may take a few minutes, be patient!
   58: 
   59:            fsck -fy /dev/rld0a
   60:            mount_msdos /dev/ld0e /boot
   61:            mv /boot/cmdline.txt.orig /boot/cmdline.txt
   62:            reboot
   63:     - When the system comes back up, the root file-system will have been expanded to
   64: 	   fill the SD card.
   65: 
   66: # Installation with sshramdisk image
   67:  - You may use the  rpi_inst.img.gz file created by an evbarm build.
   68:  - Connect Ethernet Cable to RPI.
   69:  - After starting DHCP client,SSH login to RPI with user "sysinst",passwd "netbsd".
   70:    - Be careful to note the ip address given during DHCP so you don't lose your connection
   71:    - Also for after the sysinst is done and the system reboots
   72:  - sysinst started!
   73: 
   74: # Updating the firmware
   75:  - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)
   76:    - Copy all files except 'kernel*img' into /boot and reboot
   77: 
   78: # Additional links
   79:  - [ARM userland utilities](https://github.com/jaredmcneill/userland)
   80: 
   81: # What works
   82:  - multi-user boot with root on SD card
   83:  - serial or graphics console (with EDID query / parsing)
   84:  - X windows.
   85:  - USB (host); control, interrupt and bulk transfers. Has some stability issues that are being worked on. man page missing.
   86:  - USB Ethernet
   87:  - RNG: works
   88:  - I²C: works, could use enhancements, man page
   89:  - SPI: works, could use enhancements, man page
   90:  - VCHIQ: work in progress. man page missing. (-current)
   91:  - Audio: works. man page missing. (-current)
   92: 
   93: # What needs work
   94:  - USB (host); isochronous transfers. DMA support.
   95:  - DMA controller driver / dmover(9) backend
   96:  - Teach sdhc(4) about dmover; not Raspberry Pi specific
   97:  - hardfloat; not Raspberry Pi specific
   98:  - earm ABI; not Raspberry Pi specific
   99:  - GPIO

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb