[[!meta title="NetBSD/evbarm on Raspberry Pi"]]
This page attempts to document and coordinate efforts towards NetBSD/evbarm on [Raspberry Pi](http://www.raspberrypi.org).
<small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>
- You may use the rpi.img file created by an arm build.
- An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
- 'obj/releasedir/evbarm/binary/gzimg/' if you run (for example) './build.sh -m evbarm -u release'
- <i>gunzip and dd</i> this img to your sd card.
dd if=rpi.img of=/dev/disk1
- Using a serial console
- By default the rpi.img is set to use the HDMI output; to change mount rpi.img (it's a FAT filesystem)
edit cmdline.txt and remove '"console=fb"'
- proceed with the 'dd'
- Growing the root file-system
- Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
- Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text to boot into single-user mode.
- Reboot, and at the prompt to enter the passname of shell, press
return for the default (/bin/sh).
- At the # prompt, type
"disklabel -i ld0" and press return.
- At the partition> prompt type "A" and press return.
Adjust disklabel sector from 4194304 to 62333952 [n]?
Type "y" and press return.
- partition> prompt type "a" and press return.
Filesystem type prompt, press return to use the current value (4.2BSD).
Start offset prompt, press return to use the current value.
Partition size prompt, type "$" and press return to grow the
partition to use all available free space.
- partition> prompt type "W" to save the changes to the disklabel.
Confirm this choice by typing "y" at the Label disk prompt.
Type "Q" and press return to quit disklabel.
- At the # prompt (shell), type
fsck -fy /dev/rld0a
resize_ffs -y /dev/rld0a
- This may take a few minutes, be patient!
fsck -fy /dev/rld0a
mount /dev/ld0e /boot
mv /boot/cmdline.txt.orig /boot/cmdline.txt
- When the system comes back up, the root file-system will have been expanded to
fill the SD card.
# Installation with sshramdisk image
- You may use the rpi_inst.img.gz file created by an evbarm build.
- Connect Ethernet Cable to RPI.
- After starting DHCP client,SSH login to RPI with user "sysinst",passwd "netbsd".
- sysinst started!
# Updating the firmware
- [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)
- Copy all files except 'kernel*img' into /boot and reboot
# Additional links
- [ARM userland utilities](https://github.com/jaredmcneill/userland)
# What works
- multi-user boot with root on SD card
- serial or graphics console (with EDID query / parsing)
- X windows.
- USB (host); control, interrupt and bulk transfers. Has some stability issues that are being worked on. man page missing.
- USB Ethernet
- RNG: works
- I²C: works, could use enhancements, man page
- SPI: works, could use enhancements, man page
- VCHIQ: work in progress. man page missing. (-current)
- Audio: works. man page missing. (-current)
# What needs work
- USB (host); isochronous transfers. DMA support.
- DMA controller driver / dmover(9) backend
- Teach sdhc(4) about dmover; not Raspberry Pi specific
- hardfloat; not Raspberry Pi specific
- earm ABI; not Raspberry Pi specific
CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb