--- wikisrc/ports/evbarm/raspberry_pi.mdwn	2013/03/03 22:41:49	1.9
+++ wikisrc/ports/evbarm/raspberry_pi.mdwn	2013/03/23 13:37:48	1.10
@@ -9,6 +9,40 @@ This page attempts to document and coord
 # Installation
  - You may use the rpi.img file created by an arm build.
    - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
+     - <i>gunzip and dd</i> this img to your sd card.
+
+ - Growing the root file-system
+   - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
+   - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text.
+   - Reboot, and at the prompt to enter the passname of shell, press
+	   return for the default (/bin/sh).
+   - At the # prompt, type
+
+        "disklabel -i ld0" and press return.
+   - At the partition> prompt, type "A" and press return. You will see
+     a message like:
+
+           Adjust disklabel sector from 4194304 to 62333952 [n]?
+           Type "y" and press return.
+   - At the partition> prompt, type "a" and press return.
+   - At the Filesystem type prompt, press return to use the current value (4.2BSD).
+   - At the Start offset prompt, press return to use the current value.
+   - At the Partition size prompt, type "$" and press return to grow the
+	   partition to use all available free space.
+   - At the partition> prompt, type "W" to save the changes to the
+	   disklabel. Confirm this choice by typing "y" at the Label disk
+	   prompt.
+   - Type "Q" and press return to quit disklabel.
+   - At the # prompt, type "fsck -fy /dev/rld0a" and press return.
+   - At the # prompt, type "resize_ffs -y /dev/rld0a" and press return.
+	   This may take a few minutes, be patient!
+   - At the # prompt, type "fsck -fy /dev/rld0a" and press return.
+   - At the # prompt, type "mount /dev/ld0e /boot" and press return.
+   - At the # prompt, type "mv /boot/cmdline.txt.orig /boot/cmdline.txt"
+	   and press return.
+   - At the # prompt, type "reboot" and press return. When the system
+	   comes back up, the root file-system will have been expanded to
+	   fill the SD card.
 
 # Updating the firmware
  - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)