Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.9 and 1.10

version 1.9, 2013/03/03 22:41:49 version 1.10, 2013/03/23 13:37:48
Line 9  This page attempts to document and coord Line 9  This page attempts to document and coord
 # Installation  # Installation
  - You may use the rpi.img file created by an arm build.   - You may use the rpi.img file created by an arm build.
    - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org     - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
        - <i>gunzip and dd</i> this img to your sd card.
   
    - Growing the root file-system
      - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
      - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text.
      - Reboot, and at the prompt to enter the passname of shell, press
              return for the default (/bin/sh).
      - At the # prompt, type
   
           "disklabel -i ld0" and press return.
      - At the partition> prompt, type "A" and press return. You will see
        a message like:
   
              Adjust disklabel sector from 4194304 to 62333952 [n]?
              Type "y" and press return.
      - At the partition> prompt, type "a" and press return.
      - At the Filesystem type prompt, press return to use the current value (4.2BSD).
      - At the Start offset prompt, press return to use the current value.
      - At the Partition size prompt, type "$" and press return to grow the
              partition to use all available free space.
      - At the partition> prompt, type "W" to save the changes to the
              disklabel. Confirm this choice by typing "y" at the Label disk
              prompt.
      - Type "Q" and press return to quit disklabel.
      - At the # prompt, type "fsck -fy /dev/rld0a" and press return.
      - At the # prompt, type "resize_ffs -y /dev/rld0a" and press return.
              This may take a few minutes, be patient!
      - At the # prompt, type "fsck -fy /dev/rld0a" and press return.
      - At the # prompt, type "mount /dev/ld0e /boot" and press return.
      - At the # prompt, type "mv /boot/cmdline.txt.orig /boot/cmdline.txt"
              and press return.
      - At the # prompt, type "reboot" and press return. When the system
              comes back up, the root file-system will have been expanded to
              fill the SD card.
   
 # Updating the firmware  # Updating the firmware
  - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)   - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)

Removed from v.1.9  
changed lines
  Added in v.1.10


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb