Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.97 and 1.98

version 1.97, 2018/11/06 17:36:23 version 1.98, 2018/11/06 18:03:21
Line 149  every few weeks. Line 149  every few weeks.
   
  - [https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/README](https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/README)   - [https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/README](https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/README)
   
   ## Configuring 802.11
   
   After installation, the Ethernet will function as on any other NetBSD system; simply enable dhcpcd or configure a static address.  USB WiFi devices will also function as on any other NetBSD system; in addition to dhcpcd or static, configure and enable wpa_supplicant.
   
   Note that the built-in WiFi in the RPI3 is not yet supported.   USB WiFi interfaces (that work on NetBSD in general) should all work.  In particular, the following are known to work:
   
    - urtwn0: Realtek (0xbda) 802.11n WLAN Adapter (0x8176), rev 2.00/2.00, addr 5, MAC/BB RTL8188CUS, RF 6052 1T1R
   
 ## Links  ## Links
   
 The following pages have been published by NetBSD community members.  (Note that some of them are old.)  The following pages have been published by NetBSD community members.  (Note that some of them are old.)
Line 195  A third approach, workable on the Pi 3 o Line 203  A third approach, workable on the Pi 3 o
   
 \todo Explain USB enumeration and how to ensure that the correct boot and root devices are found if one has e.g. a small SSD for the system and a big disk.  \todo Explain USB enumeration and how to ensure that the correct boot and root devices are found if one has e.g. a small SSD for the system and a big disk.
   
 # Wireless Networking  
   
 Note that the built-in WiFi in the RPI3 is not yet supported.   USB WiFi interfaces (that work on NetBSD in general) should all work.  
   
  - A Realtek 802.11n USB adaptor configures as urtwn(4).  
    - Configure with wpa_supplicant in /etc/rc.conf -  
   
            ifconfig_urtwn0=dhcp  
            dhcpcd=YES  
            dhcpcd_flags="-q -b"  
            wpa_supplicant=YES  
            wpa_supplicant_flags="-B -i urtwn0 -c /etc/wpa_supplicant.conf"  
    - A sample wpa_supplicant.conf can be found at /usr/share/examples/wpa_supplicant/wpa_supplicant.conf  
   
 # X11 and GPU  # X11 and GPU
   
 ## Console font  ## Console font

Removed from v.1.97  
changed lines
  Added in v.1.98


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb