[BACK]Return to raspberry_pi.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports / evbarm

Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.8 and 1.12

version 1.8, 2013/03/03 22:29:07 version 1.12, 2013/03/23 14:29:34
Line 9  This page attempts to document and coord Line 9  This page attempts to document and coord
 # Installation  # Installation
  - You may use the rpi.img file created by an arm build.   - You may use the rpi.img file created by an arm build.
    - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org     - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
        - <i>gunzip and dd</i> this img to your sd card.
   
    - Growing the root file-system
      - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
      - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text.
      - Reboot, and at the prompt to enter the passname of shell, press
              return for the default (/bin/sh).
      - At the # prompt, type
   
           "disklabel -i ld0" and press return.
      - At the partition> prompt
   
              type "A" and press return. You will see
      - a message like:
   
              Adjust disklabel sector from 4194304 to 62333952 [n]?
              Type "y" and press return.
      - partition> prompt
   
              type "a" and press return.
              Filesystem type prompt, press return to use the current value (4.2BSD).
              Start offset prompt, press return to use the current value.
              Partition size prompt, type "$" and press return to grow the
              partition to use all available free space.
   
      - partition> prompt
   
              type "W" to save the changes to the disklabel.
              Confirm this choice by typing "y" at the Label disk prompt.
              Type "Q" and press return to quit disklabel.
      - At the # prompt, type
   
              fsck -fy /dev/rld0a
              resize_ffs -y /dev/rld0a
      - This may take a few minutes, be patient!
   
              fsck -fy /dev/rld0a
              mount /dev/ld0e /boot
              mv /boot/cmdline.txt.orig /boot/cmdline.txt
              reboot
       - When the system comes back up, the root file-system will have been expanded to
              fill the SD card.
   
 # Updating the firmware  # Updating the firmware
  - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)   - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)
    - Copy all files except 'kernel*img' into /boot and reboot     - Copy all files except 'kernel*img' into /boot and reboot
   
   # Additional links
    - [ARM userland utilities](https://github.com/jaredmcneill/userland)
    - [Additional kernel drivers for VCHIQ](https://github.com/jaredmcneill/vchiq-netbsd)
   
 # What works  # What works
  - multi-user boot with root on SD card   - multi-user boot with root on SD card
  - serial or graphics console (with EDID query / parsing)   - serial or graphics console (with EDID query / parsing)
Removed from v.1.8  
changed lines
  Added in v.1.12

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb