Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.85 and 1.86

version 1.85, 2018/11/06 02:38:43 version 1.86, 2018/11/06 03:13:59
Line 55  Note that one can run earmv6hf code on t Line 55  Note that one can run earmv6hf code on t
   
 ## SD card structure  ## SD card structure
   
 The Raspberry Pi looks for firmware and kernel.img on the first FAT32 partition of the uSD card.  A separate kernel (kernel7.img) is used on RPI2 and RPI3.  The Raspberry Pi looks for firmware and kernel.img on the first FAT32 MBR partition of the uSD card.  A separate kernel (kernel7.img) is used on RPI2 and RPI3.
   The NetBSD kernel will then find NetBSD MBR partition and within that the root disklabel partition, and use that FFS partition as the root filesystem.
   
 The NetBSD kernel will then use the FFS partition as the root filesystem.  A 2 GB card is the smallest workable size, and the installation image will fit.  After the first boot, the system resizes the NetBSD root partition to fill the card.  Note that swap is after /boot and before /, and not contained in the NetBSD fdisk partition.  However, if you don't try to change the partition structure, this should not cause you any trouble.
   
 A 2 GB card is the smallest workable size.  The NetBSD filesystem will be expanded to fit.  
   
 ## Choosing a version  ## Choosing a version
   

Removed from v.1.85  
changed lines
  Added in v.1.86


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb