Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.71 and 1.72

version 1.71, 2018/10/30 01:33:39 version 1.72, 2018/10/30 01:40:39
Line 195  $ retroarch --appendconfig gamepad.cfg - Line 195  $ retroarch --appendconfig gamepad.cfg -
   
 These notes are for people working on improvements to RPI support in NetBSD.  These notes are for people working on improvements to RPI support in NetBSD.
   
 ## Updating the firmware  ## Updating the firmware version in the NetBSD sources
   
 You probably don't want to do this. Firmware updates can break things,  (Note that trying new firmware may result in a non-bootable system, so
 and the latest firmware that's been tested is already included in the  be prepared to recover the bootable media with another system.)
 NetBSD build you installed.  
   
 If you're feeling adventurous (or are the port maintainer), here's what  Upstream firmware releases are
 to test whenever you try new firmware:  [on GitHub](https://github.com/raspberrypi/firmware/releases).
   Copy all files except `kernel*.img` into `/boot` and reboot.
   
   New firmware should pass all of the following tests before being committed to NetBSD.
   
 - Audio  - Audio
 - OMXPlayer (and [[!template id=man name="vchiq"]])  - OMXPlayer (and [[!template id=man name="vchiq"]])
 - Serial/framebuffer console  - Serial/framebuffer console
 - CPU frequency scaling  - CPU frequency scaling
   
 That goes for all of `rpi[0123]`.  Tests shoudl be run on all of `rpi[0123]`.
   
 Upstream firmware releases are  
 [on GitHub](https://github.com/raspberrypi/firmware/releases).  
 Copy all files except `kernel*.img` into `/boot` and reboot.  

Removed from v.1.71  
changed lines
  Added in v.1.72


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb