[BACK]Return to raspberry_pi.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports / evbarm

Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.60 and 1.63

version 1.60, 2017/10/21 23:54:22 version 1.63, 2017/10/22 00:39:08
Line 52  Note that one can also use code for earl Line 52  Note that one can also use code for earl
   
 # Installation  # Installation
   
   ## SD card structure
   
   The Raspberry Pi looks for firmware and a kernel on the first FAT32
   partition of the uSD card.  The NetBSD kernel will then use the FFS
   partition as the root filesystem.
   
   A 2 GB card is the smallest workable size.  The NetBSD filesystem will
   be expanded to fit on larger cards.
   
   ## Choosing a version
   
 First, decide if you want to install a formal release (7.1), a stable  First, decide if you want to install a formal release (7.1), a stable
 branch build (netbsd-7, netbsd-8), or current.  Note that 7.1 predates  branch build (netbsd-7, netbsd-8), or current.  Note that 7.1 predates
 Raspberry Pi 3 support.  For people who don't know how to choose among  Raspberry Pi 3 support.  For people who don't know how to choose among
Line 62  those, netbsd-8 is probably best. Line 73  those, netbsd-8 is probably best.
 You can either build a release yourself with build.sh, or get one from the NetBSD FTP servers.  You can either build a release yourself with build.sh, or get one from the NetBSD FTP servers.
   
 Both will provide rpi.img.gz and rpi_inst.img.gz.  Each is an image to  Both will provide rpi.img.gz and rpi_inst.img.gz.  Each is an image to
 be written to a uSD card, and it has a FAT32 partition for booting and  be written to a uSD card, and has a FAT32 partition for booting.  In
 an FFS partition for NetBSD.  rpi.img.gz, there is also an FFS partition for NetBSD.
   
 ### Building yourself  ### Building yourself
   
Line 85  NetBSD provides nightly builds on [nyftp Line 96  NetBSD provides nightly builds on [nyftp
   
 ## Installing to uSD  ## Installing to uSD
   
 Once you have rpi.img.gz, put it on a uSD card using gunzip and dd, for examples  Once you have rpi.img.gz, put it on a uSD card using gunzip and dd, for example:
   
  - gunzip rpi.img.gz   - gunzip rpi.img.gz
  - dd if=rpi.i7mg of=/dev/disk1   - dd if=rpi.i7mg of=/dev/disk1
Line 105  edit cmdline.txt and remove '"console=fb Line 116  edit cmdline.txt and remove '"console=fb
   
 build.sh (and hence the FTP site) also creates an image 'rpi_inst.img.gz' specifically for installation without HDMI or a serial console.  To use this method, write that image to a uSD card as above, and then:  build.sh (and hence the FTP site) also creates an image 'rpi_inst.img.gz' specifically for installation without HDMI or a serial console.  To use this method, write that image to a uSD card as above, and then:
   
  - Connect Ethernet Cable to RPI.   - Ensure that you have a lan with a DHCP server.
    - Connect an Ethernet cable from the RPI to the LAN.
  - After starting DHCP client, SSH login to with user "sysinst", and password "netbsd".   - After starting DHCP client, SSH login to with user "sysinst", and password "netbsd".
    - Be careful to note the ip address given during DHCP so you don't lose your connection     - Be careful to note the ip address given during DHCP so you don't lose your connection
    - Also for after the sysinst is done and the system reboots     - Also for after the sysinst is done and the system reboots
Removed from v.1.60  
changed lines
  Added in v.1.63

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb