Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.60 and 1.61

version 1.60, 2017/10/21 23:54:22 version 1.61, 2017/10/21 23:58:28
Line 85  NetBSD provides nightly builds on [nyftp Line 85  NetBSD provides nightly builds on [nyftp
   
 ## Installing to uSD  ## Installing to uSD
   
 Once you have rpi.img.gz, put it on a uSD card using gunzip and dd, for examples  Once you have rpi.img.gz, put it on a uSD card using gunzip and dd, for example:
   
  - gunzip rpi.img.gz   - gunzip rpi.img.gz
  - dd if=rpi.i7mg of=/dev/disk1   - dd if=rpi.i7mg of=/dev/disk1
Line 105  edit cmdline.txt and remove '"console=fb Line 105  edit cmdline.txt and remove '"console=fb
   
 build.sh (and hence the FTP site) also creates an image 'rpi_inst.img.gz' specifically for installation without HDMI or a serial console.  To use this method, write that image to a uSD card as above, and then:  build.sh (and hence the FTP site) also creates an image 'rpi_inst.img.gz' specifically for installation without HDMI or a serial console.  To use this method, write that image to a uSD card as above, and then:
   
  - Connect Ethernet Cable to RPI.   - Ensure that you have a lan with a DHCP server.
    - Connect an Ethernet cable from the RPI to the LAN.
  - After starting DHCP client, SSH login to with user "sysinst", and password "netbsd".   - After starting DHCP client, SSH login to with user "sysinst", and password "netbsd".
    - Be careful to note the ip address given during DHCP so you don't lose your connection     - Be careful to note the ip address given during DHCP so you don't lose your connection
    - Also for after the sysinst is done and the system reboots     - Also for after the sysinst is done and the system reboots

Removed from v.1.60  
changed lines
  Added in v.1.61


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb