Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.41 and 1.42

version 1.41, 2015/07/16 23:08:18 version 1.42, 2015/07/17 12:03:52
Line 90  Initial Raspberry Pi support was introdu Line 90  Initial Raspberry Pi support was introdu
  - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)   - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)
    - Copy all files except 'kernel*.img' into /boot and reboot     - Copy all files except 'kernel*.img' into /boot and reboot
   
   # Updating the kernel
    - Build a new kernel, e.g. using build.sh. It will tell you where the ELF version of the kernel is, e.g.
   
            ...
            Kernels built from RPI2:
             /Users/feyrer/work/NetBSD/cvs/src-current/obj.evbarm-Darwin-XXX/sys/arch/evbarm/compile/RPI2/netbsd
            ...
   
    - Besides the "netbsd" kernel in ELF format, there is also a "netbsd.bin" kernel that is in a format that the Raspberry can boot. 
    - Depending on your hardware version, copy this either to /boot/kernel.img (old/V1 hardware) or to /boot/kernel7.img (new/V2 hardware)
    - reboot
   
 # Wireless Networking  # Wireless Networking
  - A Realtek 802.11n USB adaptor configures as urtwn(4).   - A Realtek 802.11n USB adaptor configures as urtwn(4).
    - Configure with wpa_supplicant in /etc/rc.conf -     - Configure with wpa_supplicant in /etc/rc.conf -

Removed from v.1.41  
changed lines
  Added in v.1.42


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb