[BACK]Return to raspberry_pi.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports / evbarm

Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.40 and 1.41

version 1.40, 2015/04/07 10:10:04 version 1.41, 2015/07/16 23:08:18
Line 27  Initial Raspberry Pi support was introdu Line 27  Initial Raspberry Pi support was introdu
   
            edit cmdline.txt and remove '"console=fb"'             edit cmdline.txt and remove '"console=fb"'
   
      - Most (all?) USB-to-TTL serial adapters only connect Tx, Rx and ground, and do not connect any flow control lines. An effect of missing flow control is that you see console output, but cannot type anything. If so, adjust your serial console application's flow control settings to "none". 
   
         In Kermit, the command is "set flow none".
   
         In minicom, run "minicom -s" and set hardware flow control to "no"
   
  - Growing the root file-system (**not required with NetBSD -current after 2015-04-07**)   - Growing the root file-system (**not required with NetBSD -current after 2015-04-07**)
    - During the partitioning process, do not delete or format the     - During the partitioning process, do not delete or format the
      first MSDOS (FAT) partition, as the Raspberry pi firmware is       first MSDOS (FAT) partition, as the Raspberry pi firmware is
Removed from v.1.40  
changed lines
  Added in v.1.41

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb