--- wikisrc/ports/evbarm/raspberry_pi.mdwn	2013/01/07 16:30:58	1.2
+++ wikisrc/ports/evbarm/raspberry_pi.mdwn	2015/01/05 17:39:48	1.25
@@ -1,16 +1,113 @@
 [[!meta title="NetBSD/evbarm on Raspberry Pi"]]
 
+[[images/raspberrypi.jpg]]
+
 This page attempts to document and coordinate efforts towards NetBSD/evbarm on [Raspberry Pi](http://www.raspberrypi.org).
 
-# What works
- - multi-user boot with root on SD card and serial console
+<small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>
+
+# Installation
+ - You may use the rpi.img file created by an evbarm build - evbarm-earmv6hf is recommended.
+   - The Raspberry Pi port will be part of the NetBSD 7 stable release,
+     but you may want to use the HEAD branch for the latest development code.
+   - The automatic nightly builds can be found in the 'evbarm-earmv6hf/binary/gzimg/' directory under on [nyftp.netbsd.org](http://nyftp.netbsd.org/pub/NetBSD-daily/).
+     - The HEAD/current build will be under HEAD/YYYYMMDDHHMMZ/evbarm-earmv6hf/binary/gzimg/
+     - The stable build will be under netbsd-7/YYYYMMDDHHMMZ/evbarm-earmv6hf/binary/gzimg/
+     - For example, http://nyftp.netbsd.org/pub/NetBSD-daily/netbsd-7/201412161700Z/evbarm-earmv6hf/binary/gzimg/
+   - 'releasedir/evbarm/binary/gzimg/' if you run (for example) './build.sh -m evbarm -a earmv6hf -u release'
+   - <i>gunzip and dd</i> this img to your sd card.
+
+	   dd if=rpi.img of=/dev/disk1
+
+ - Using a serial console
+   - By default the rpi.img is set to use the HDMI output; to change to using a serial console first mount rpi.img (it's a FAT filesystem)
+
+	   edit cmdline.txt and remove '"console=fb"'
+
+ - Growing the root file-system
+   - During the partitioning process, do not delete or format the
+     first MSDOS (FAT) partition, as the Raspberry pi firmware is
+     hard coded to boot on the SDCAD / 1st MSDOS partition / Firmware
+     updates and boot loader.
+   - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
+   - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text to boot into single-user mode.
+   - For the next steps, the root filesystem mustn't be mounted rw. So reboot, and at the prompt to enter the pathname of shell,
+     press return for the default (/bin/sh).
+   - At the # prompt, type
+
+        "disklabel -i ld0" and press return.
+
+   - At the partition> prompt type "A" and press return.
+
+           Adjust disklabel sector from 4194304 to 62333952 [n]?
+           Type "y" and press return.
+
+   - partition> prompt type "a" and press return.
+
+           Filesystem type prompt, press return to use the current value (4.2BSD).
+           Start offset prompt, press return to use the current value.
+           Partition size prompt, type "$" and press return to grow the
+           partition to use all available free space.
+
+   - partition> prompt type "W" to save the changes to the disklabel.
+
+           Confirm this choice by typing "y" at the Label disk prompt.
+           Type "Q" and press return to quit disklabel.
+
+   - At the # prompt (shell), type
+
+           fsck -fy /dev/rld0a
+           resize_ffs -y /dev/rld0a
+
+   - This may take a few minutes, be patient!
+
+           fsck -fy /dev/rld0a
+           mount_msdos /dev/ld0e /boot
+           mv /boot/cmdline.txt.orig /boot/cmdline.txt
+           reboot
+
+    - When the system comes back up, the root file-system will have been expanded to
+	   fill the SD card.
+
+# Installation with sshramdisk image
+ - You may use the  rpi_inst.img.gz file created by an evbarm build.
+ - Connect Ethernet Cable to RPI.
+ - After starting DHCP client, SSH login to with user "sysinst", and password "netbsd".
+   - Be careful to note the ip address given during DHCP so you don't lose your connection
+   - Also for after the sysinst is done and the system reboots
+ - sysinst started!
+
+# Updating the firmware
+ - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)
+   - Copy all files except 'kernel*.img' into /boot and reboot
+
+# Wireless Networking
+ - A Realtek 802.11n USB adaptor configures as urtwn(4).
+   - Configure with wpa_supplicant in /etc/rc.conf -
+
+           ifconfig_urtwn0=dhcp
+           dhcpcd=YES
+           dhcpcd_flags="-q -b"
+           wpa_supplicant=YES
+           wpa_supplicant_flags="-B -i urtwn0 -c /etc/wpa_supplicant.conf"
+   - A sample wpa_supplicant.conf can be found at /usr/share/examples/wpa_supplicant/wpa_supplicant.conf
+
+# Additional links
+ - [ARM userland utilities](https://github.com/jaredmcneill/userland)
+
+# What works in -current
+ - multi-user boot with root on SD card
+ - serial or graphics console (with EDID query / parsing)
+ - DMA controller driver and sdhc(4) support
+ - Audio: works. man page missing.
  - I²C: works, could use enhancements, man page
- - SPI: works, could use enhancements, man page
+ - GPIO
+ - RNG
+ - SPI: could use enhancements, man page
+ - VCHIQ: man page missing.
+ - USB (host) - dwctwo(4)
+ - USB Ethernet - usmsc(4)
+ - X windows.
 
 # What needs work
- - USB (host); work in progress
- - USB Ethernet; work in progress
- - DMA for SDHCI
- - GPIO
- - framebuffer; work in progress
- - almost everything relating to working with the VideoCore IV
+ - USB (host); isochronous transfers.