--- wikisrc/ports/evbarm/raspberry_pi.mdwn	2013/03/26 00:21:25	1.13
+++ wikisrc/ports/evbarm/raspberry_pi.mdwn	2013/11/22 16:12:19	1.19
@@ -4,57 +4,81 @@
 
 This page attempts to document and coordinate efforts towards NetBSD/evbarm on [Raspberry Pi](http://www.raspberrypi.org).
 
-(Raspberry Pi [image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)
+<small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>
 
 # Installation
- - You may use the rpi.img file created by an arm build.
-   - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
+ - Use the latest HEAD/-current which builds for install
+   - As the Raspberry Pi port is still not part the stable release, you will want to use the
+     HEAD branch to download installation sets.
+   - You may use the rpi.img file created by an evbarm build - evbarm-earmv6hf is recommended, but this is not currently available on nyftp. For now, evbarm-earmhf is best.
+   - An example can be found in the 'evbarm-earmhf/binary/gzimg/' directory under releng.netbsd.org
+     - On nyftp.netbsd.org/pub/NetBSD-daily/HEAD/YYYYMMDDHHMMZ (it will look like pub/NetBSD-daily/HEAD/201305220150Z)
+   - 'releasedir/evbarm/binary/gzimg/' if you run (for example) './build.sh -m evbarm -a earmv6hf -u release'
      - <i>gunzip and dd</i> this img to your sd card.
 
+	   dd if=rpi.img of=/dev/disk1
+
+ - Using a serial console
+   - By default the rpi.img is set to use the HDMI output; to change to using a serial console first mount rpi.img (it's a FAT filesystem)
+
+	   edit cmdline.txt and remove '"console=fb"'
+
  - Growing the root file-system
+   - During the partitioning process, do not delete or format the
+     first MSDOS (FAT) partition, as the Raspberry pi firmware is
+     hard coded to boot on the SDCAD / 1st MSDOS partition / Firmware
+     updates and boot loader.
    - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
-   - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text.
-   - Reboot, and at the prompt to enter the passname of shell, press
+   - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text to boot into single-user mode.
+   - Reboot, and at the prompt to enter the pathname of shell, press
 	   return for the default (/bin/sh).
    - At the # prompt, type
 
         "disklabel -i ld0" and press return.
-   - At the partition> prompt
 
-           type "A" and press return. You will see
-   - a message like:
+   - At the partition> prompt type "A" and press return.
 
            Adjust disklabel sector from 4194304 to 62333952 [n]?
            Type "y" and press return.
-   - partition> prompt
 
-           type "a" and press return.
+   - partition> prompt type "a" and press return.
+
            Filesystem type prompt, press return to use the current value (4.2BSD).
            Start offset prompt, press return to use the current value.
            Partition size prompt, type "$" and press return to grow the
            partition to use all available free space.
 
-   - partition> prompt
+   - partition> prompt type "W" to save the changes to the disklabel.
 
-           type "W" to save the changes to the disklabel.
            Confirm this choice by typing "y" at the Label disk prompt.
            Type "Q" and press return to quit disklabel.
-   - At the # prompt, type
+
+   - At the # prompt (shell), type
 
            fsck -fy /dev/rld0a
            resize_ffs -y /dev/rld0a
+
    - This may take a few minutes, be patient!
 
            fsck -fy /dev/rld0a
-           mount /dev/ld0e /boot
+           mount_msdos /dev/ld0e /boot
            mv /boot/cmdline.txt.orig /boot/cmdline.txt
            reboot
+
     - When the system comes back up, the root file-system will have been expanded to
 	   fill the SD card.
 
+# Installation with sshramdisk image
+ - You may use the  rpi_inst.img.gz file created by an evbarm build.
+ - Connect Ethernet Cable to RPI.
+ - After starting DHCP client, SSH login to with user "sysinst", and password "netbsd".
+   - Be careful to note the ip address given during DHCP so you don't lose your connection
+   - Also for after the sysinst is done and the system reboots
+ - sysinst started!
+
 # Updating the firmware
  - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)
-   - Copy all files except 'kernel*img' into /boot and reboot
+   - Copy all files except 'kernel*.img' into /boot and reboot
 
 # Additional links
  - [ARM userland utilities](https://github.com/jaredmcneill/userland)
@@ -63,8 +87,8 @@ This page attempts to document and coord
  - multi-user boot with root on SD card
  - serial or graphics console (with EDID query / parsing)
  - X windows.
- - USB (host); control, interrupt and bulk transfers. Has some stability issues that are being worked on. man page missing.
- - USB Ethernet
+ - USB (host) - dwctwo(4)
+ - USB Ethernet - usmsc(4)
  - RNG: works
  - I²C: works, could use enhancements, man page
  - SPI: works, could use enhancements, man page
@@ -72,9 +96,7 @@ This page attempts to document and coord
  - Audio: works. man page missing. (-current)
 
 # What needs work
- - USB (host); isochronous transfers. DMA support.
+ - USB (host); isochronous transfers.
  - DMA controller driver / dmover(9) backend
  - Teach sdhc(4) about dmover; not Raspberry Pi specific
- - hardfloat; not Raspberry Pi specific
- - earm ABI; not Raspberry Pi specific
  - GPIO