Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.16 and 1.17

version 1.16, 2013/05/03 00:54:17 version 1.17, 2013/06/01 10:29:03
Line 7  This page attempts to document and coord Line 7  This page attempts to document and coord
 <small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>  <small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>
   
 # Installation  # Installation
  - You may use the rpi.img file created by an arm build.   - Use the latest HEAD/-current which builds for install
      - As the raspberry pi port is still not part the stable release, you will want to use the
        HEAD branch to download installation sets.
      - You may use the rpi.img file created by an arm build.
    - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org     - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
        - On nyftp.netbsd.org/pub/NetBSD-daily/HEAD/YYYYMMDDHHMMZ (it will look like pub/NetBSD-daily/HEAD/201305220150Z)
    - 'obj/releasedir/evbarm/binary/gzimg/' if you run (for example) './build.sh -m evbarm -u release'     - 'obj/releasedir/evbarm/binary/gzimg/' if you run (for example) './build.sh -m evbarm -u release'
      - <i>gunzip and dd</i> this img to your sd card.       - <i>gunzip and dd</i> this img to your sd card.
   
Line 21  This page attempts to document and coord Line 25  This page attempts to document and coord
    - proceed with the 'dd'     - proceed with the 'dd'
   
  - Growing the root file-system   - Growing the root file-system
      - During the partitioning process, do not delete or format the
        first MSDOS (FAT) partition, as the Raspberry pi firmware is
        hard coded to boot on the SDCAD / 1st MSDOS partition / Firmware
        updates and boot loader.
    - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig     - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
    - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text to boot into single-user mode.     - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text to boot into single-user mode.
    - Reboot, and at the prompt to enter the passname of shell, press     - Reboot, and at the prompt to enter the passname of shell, press
Line 59  This page attempts to document and coord Line 67  This page attempts to document and coord
  - You may use the  rpi_inst.img.gz file created by an evbarm build.   - You may use the  rpi_inst.img.gz file created by an evbarm build.
  - Connect Ethernet Cable to RPI.   - Connect Ethernet Cable to RPI.
  - After starting DHCP client,SSH login to RPI with user "sysinst",passwd "netbsd".   - After starting DHCP client,SSH login to RPI with user "sysinst",passwd "netbsd".
  - sysinst started!      - Be careful to note the ip address given during DHCP so you don't lose your connection
      - Also for after the sysinst is done and the system reboots
    - sysinst started!
   
 # Updating the firmware  # Updating the firmware
  - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)   - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)

Removed from v.1.16  
changed lines
  Added in v.1.17


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb