--- wikisrc/ports/evbarm/raspberry_pi.mdwn	2013/04/20 16:09:24	1.15
+++ wikisrc/ports/evbarm/raspberry_pi.mdwn	2013/06/01 10:29:03	1.17
@@ -7,8 +7,12 @@ This page attempts to document and coord
 <small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>
 
 # Installation
- - You may use the rpi.img file created by an arm build.
+ - Use the latest HEAD/-current which builds for install
+   - As the raspberry pi port is still not part the stable release, you will want to use the
+     HEAD branch to download installation sets.
+   - You may use the rpi.img file created by an arm build.
    - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
+     - On nyftp.netbsd.org/pub/NetBSD-daily/HEAD/YYYYMMDDHHMMZ (it will look like pub/NetBSD-daily/HEAD/201305220150Z)
    - 'obj/releasedir/evbarm/binary/gzimg/' if you run (for example) './build.sh -m evbarm -u release'
      - <i>gunzip and dd</i> this img to your sd card.
 
@@ -21,6 +25,10 @@ This page attempts to document and coord
    - proceed with the 'dd'
 
  - Growing the root file-system
+   - During the partitioning process, do not delete or format the
+     first MSDOS (FAT) partition, as the Raspberry pi firmware is
+     hard coded to boot on the SDCAD / 1st MSDOS partition / Firmware
+     updates and boot loader.
    - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
    - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text to boot into single-user mode.
    - Reboot, and at the prompt to enter the passname of shell, press
@@ -55,6 +63,14 @@ This page attempts to document and coord
     - When the system comes back up, the root file-system will have been expanded to
 	   fill the SD card.
 
+# Installation with sshramdisk image
+ - You may use the  rpi_inst.img.gz file created by an evbarm build.
+ - Connect Ethernet Cable to RPI.
+ - After starting DHCP client,SSH login to RPI with user "sysinst",passwd "netbsd".
+   - Be careful to note the ip address given during DHCP so you don't lose your connection
+   - Also for after the sysinst is done and the system reboots
+ - sysinst started!
+
 # Updating the firmware
  - [rpi firmware files](https://github.com/raspberrypi/firmware/tree/master/boot)
    - Copy all files except 'kernel*img' into /boot and reboot