Diff for /wikisrc/ports/evbarm/raspberry_pi.mdwn between versions 1.13 and 1.14

version 1.13, 2013/03/26 00:21:25 version 1.14, 2013/04/19 02:04:10
Line 4 Line 4
   
 This page attempts to document and coordinate efforts towards NetBSD/evbarm on [Raspberry Pi](http://www.raspberrypi.org).  This page attempts to document and coordinate efforts towards NetBSD/evbarm on [Raspberry Pi](http://www.raspberrypi.org).
   
 (Raspberry Pi [image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)  <small>([Raspberry Pi image](http://www.flickr.com/photos/42325803@N07/8118758647/) by Christopher Lee used under CC-By-2.0 license)</small>
   
 # Installation  # Installation
  - You may use the rpi.img file created by an arm build.   - You may use the rpi.img file created by an arm build.
    - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org     - An example can be found in the '/evbarm/binary/gzimg/' directory under releng.netbsd.org
      - <i>gunzip and dd</i> this img to your sd card.       - <i>gunzip and dd</i> this img to your sd card.
   
              dd if=rpi.img of=/dev/disk1
   
    - Using a serial console
      - By default the rpi.img is set to use the HDMI output; to change mount rpi.img (it's a FAT filesystem)
   
              edit cmdline.txt and remove '"console=fb"'
      - proceed with the 'dd'
   
  - Growing the root file-system   - Growing the root file-system
    - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig     - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
    - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text.     - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text.

Removed from v.1.13  
changed lines
  Added in v.1.14


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb