Diff for /wikisrc/ports/evbarm/odroid-c1.mdwn between versions 1.29 and 1.33

version 1.29, 2017/11/22 14:35:02 version 1.33, 2021/02/19 23:07:31
Line 1 Line 1
 [[!meta title="NetBSD/evbarm on Hardkernel ODROID-C1 and ODROID-C1+"]]  [[!meta title="NetBSD/evbarm on Hardkernel ODROID-C1 and ODROID-C1+"]]
   
 [ODROID-C1](http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141578608433&tab_idx=1) was a $35 quad-core SBC from Hardkernel. ODROID-C1 support was introduced in NetBSD 7.0.  It has been succeeded by the [ODROID-C1+](http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143703355573), which is supported by the same NetBSD kernel.  [ODROID-C1](https://www.hardkernel.com/shop/odroid-c1-2/) was a $35 quad-core SBC from Hardkernel. ODROID-C1 support was introduced in NetBSD 7.0.  It has been succeeded by the [ODROID-C1+](https://www.hardkernel.com/shop/odroid-c1/), which is supported by the same NetBSD kernel.
   
 [[!toc levels=2]]  [[!toc levels=2]]
   
Line 30 Line 30
   
 # Installation (NetBSD 8.0 and later)  # Installation (NetBSD 8.0 and later)
   
 * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *armv7.img*  * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *armv7.img*, the latest is [[here|https://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/latest/evbarm-earmv7hf/binary/gzimg/armv7.img]].
 * Build U-Boot for ODROID-C1 <https://github.com/hardkernel/u-boot/tree/odroidc-v2011.03>  * Build U-Boot for ODROID-C1 <hhttps://github.com/jaredmcneill/u-boot-odroid>
   * Pre-built binaries here: <http://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/odroidc1/u-boot-odroidc-v2011.03-20150308.tar.gz>    * Pre-built binaries here:
      <http://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/odroidc1/u-boot-odroidc-v2011.03-20150308.tar.gz>
      <http://www.netbsd.org/~jmcneill/u-boot.bin.odroidc1>
 * Write the bootloader to the empty space at the start of the base image:  * Write the bootloader to the empty space at the start of the base image:
 [[!template  id=programlisting text="""  [[!template  id=programlisting text="""
 # dd if=bl1.bin.hardkernel of=armv7.img bs=1 count=442 conv=notrunc  # dd if=bl1.bin.hardkernel of=armv7.img bs=1 count=442 conv=notrunc
 # dd if=bl1.bin.hardkernel of=armv7.img bs=512 skip=1 seek=1 conv=notrunc  # dd if=bl1.bin.hardkernel of=armv7.img bs=512 skip=1 seek=1 conv=notrunc
 # dd if=u-boot.bin of=armv7.img bs=512 seek=64 conv=notrunc  # dd if=u-boot.bin.odroidc1 of=armv7.img bs=512 seek=64 conv=notrunc
 """]]  """]]
 * Write the image to an SD card.  * Write the image to an SD card.
 * Edit *boot.ini* on the MS-DOS partition. Note that the default boot.ini has `console=fb` in `bootargs`, which you should remove if you want serial console:  * Tested 2021-02-19 with NetBSD-current, christos
 [[!template  id=programlisting text="""  
 ODROIDC-UBOOT-CONFIG  
   
 setenv bootargs "root=ld0a awge0.mac-address=${ethaddr} console=fb"  
 setenv bootcmd "fatload mmc 0:1 0x21000000 netbsd-ODROID-C1.ub; bootm 0x21000000"  
 run bootcmd  
 """]]   
   
 # Installation (NetBSD 7.0/7.1)  # Installation (NetBSD 7.0/7.1)
   

Removed from v.1.29  
changed lines
  Added in v.1.33


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb