Diff for /wikisrc/ports/evbarm/odroid-c1.mdwn between versions 1.27 and 1.29

version 1.27, 2017/04/01 10:19:27 version 1.29, 2017/11/22 14:35:02
Line 28 Line 28
  - I2C   - I2C
  - Audio   - Audio
   
 # Installation  # Installation (NetBSD 8.0 and later)
   
   * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *armv7.img*
   * Build U-Boot for ODROID-C1 <https://github.com/hardkernel/u-boot/tree/odroidc-v2011.03>
     * Pre-built binaries here: <http://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/odroidc1/u-boot-odroidc-v2011.03-20150308.tar.gz>
   * Write the bootloader to the empty space at the start of the base image:
   [[!template  id=programlisting text="""
   # dd if=bl1.bin.hardkernel of=armv7.img bs=1 count=442 conv=notrunc
   # dd if=bl1.bin.hardkernel of=armv7.img bs=512 skip=1 seek=1 conv=notrunc
   # dd if=u-boot.bin of=armv7.img bs=512 seek=64 conv=notrunc
   """]]
   * Write the image to an SD card.
   * Edit *boot.ini* on the MS-DOS partition. Note that the default boot.ini has `console=fb` in `bootargs`, which you should remove if you want serial console:
   [[!template  id=programlisting text="""
   ODROIDC-UBOOT-CONFIG
   
   setenv bootargs "root=ld0a awge0.mac-address=${ethaddr} console=fb"
   setenv bootcmd "fatload mmc 0:1 0x21000000 netbsd-ODROID-C1.ub; bootm 0x21000000"
   run bootcmd
   """]] 
   
   # Installation (NetBSD 7.0/7.1)
   
 * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *armv7.img*  * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *armv7.img*
 * Build U-Boot for ODROID-C1 <https://github.com/hardkernel/u-boot/tree/odroidc-v2011.03>  * Build U-Boot for ODROID-C1 <https://github.com/hardkernel/u-boot/tree/odroidc-v2011.03>

Removed from v.1.27  
changed lines
  Added in v.1.29


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb