[BACK]Return to odroid-c1.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports / evbarm

Diff for /wikisrc/ports/evbarm/odroid-c1.mdwn between versions 1.1 and 1.2

version 1.1, 2015/02/27 17:58:34 version 1.2, 2015/03/08 13:34:37
Line 2 Line 2
   
 [[!toc levels=2]]  [[!toc levels=2]]
   
   # Supported hardware
    - CPU: Cortex-A5: S805 (4-core) at 1.5GHz
      - CPU frequency scaling is supported with machdep.cpu sysctl tree
      - SMP supported
      - PL310 L2 cache controller
    - GIC
    - A5 watchdog timer
    - A5 global timer
    - SD/MMC controller (DMA)
    - Serial console
    - USB host (OTG)
    - Gigabit Ethernet (GMAC)
      - RTL8211F PHY
    - Hardware random number generator
   
   # TODO
    - USB device mode
    - Simultaneous SD card and eMMC usage
    - SD/MMC UHS-I support (needs sdmmc(4) changes)
    - HDMI / framebuffer
    - IR receiver
    - GPIO
    - I2C
   
   # Installation
   
   * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *beagleboard.img*
   * Build U-Boot for ODROID-C1 <https://github.com/hardkernel/u-boot/tree/odroidc-v2011.03>
   * Write the bootloader to the empty space at the start of the base image:
   [[!template  id=programlisting text="""
   # dd if=bl1.bin.hardkernel of=beagleboard.img bs=1 count=442 conv=notrunc
   # dd if=bl1.bin.hardkernel of=beagleboard.img bs=512 skip=1 seek=1 conv=notrunc
   # dd if=u-boot.bin of=beagleboard.img bs=512 seek=64 conv=notrunc
   """]]
   * Write the image to an SD card.
   * Copy the kernel (netbsd.ub) for your board to the root of the MS-DOS partition on the SD card.
   * Create or edit boot.ini on the MS-DOS partition:
   [[!template  id=programlisting text="""
   ODROIDC-UBOOT-CONFIG
   
   setenv m "1080p"
   setenv vout_mode "hdmi"
   setenv m_bpp "32"
   setenv disableuhs "disableuhs"
   setenv bootargs "root=ld0a awge0.mac-address=${ethaddr}"
   setenv bootcmd "fatload mmc 0:1 0x21000000 netbsd.ub; bootm 0x21000000"
   run bootcmd
   """]]
   
   
 # ODROID-C1 UART pins  # ODROID-C1 UART pins
   
 From [ODROID Forum](http://forum.odroid.com/viewtopic.php?f=115&t=7684):  From [ODROID Forum](http://forum.odroid.com/viewtopic.php?f=115&t=7684):
Removed from v.1.1  
changed lines
  Added in v.1.2

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb