Diff for /wikisrc/ports/evbarm/odroid-c1.mdwn between versions 1.14 and 1.15

version 1.14, 2015/04/03 20:23:55 version 1.15, 2015/04/25 14:50:13
Line 20 Line 20
    - RTL8211F PHY     - RTL8211F PHY
  - Hardware random number generator   - Hardware random number generator
  - RTC   - RTC
    - GPIO
   
 # TODO  # TODO
  - USB device mode   - USB device mode
  - Simultaneous SD card and eMMC usage   - Simultaneous SD card and eMMC usage
  - SD/MMC UHS-I support (needs sdmmc(4) changes)   - SD/MMC UHS-I support (needs sdmmc(4) changes)
  - IR receiver   - IR receiver
  - GPIO  
  - I2C   - I2C
  - Audio   - Audio
   
Line 147  Setting *scale* to 100 disables scaling, Line 147  Setting *scale* to 100 disables scaling,
   
 To set this value at boot, you can add **fb.scale=95** to the kernel cmdline options in *boot.ini*.  To set this value at boot, you can add **fb.scale=95** to the kernel cmdline options in *boot.ini*.
   
   # SYS_LED
   
   The blue SYS_LED on the board is wired to GPIOAO_13. To control the LED from userland, set **gpio=YES** in rc.conf and add this to */etc/gpio.conf*:
   
   [[!template  id=programlisting text="""
   gpio4 13 set out sys_led
   """]]
   
   After rebooting, the LED state can be controlled with [[!template id=man name="gpioctl" section="8"]].
   
   [[!template  id=programlisting text="""
   # turn the light on
   gpioctl gpio4 sys_led on
   
   # turn the light off
   gpioctl gpio4 sys_led off
   
   # toggle the light state
   gpioctl gpio4 sys_led toggle
   """]]
   
 # Documentation  # Documentation
   
 Amlogic S805 datasheet: <http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf>  Amlogic S805 datasheet: <http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf>

Removed from v.1.14  
changed lines
  Added in v.1.15


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb