Diff for /wikisrc/ports/evbarm/install_using_sysinst.mdwn between versions 1.15 and 1.19

version 1.15, 2018/11/19 22:50:11 version 1.19, 2020/03/10 22:22:10
Line 1 Line 1
 [[!meta title="NetBSD/evbarm install via sysinst(8) on a SATA hard disk, USB stick or (u)SD card"]]  [[!meta title="NetBSD/evbarm 8.0 install via sysinst(8) on a SATA hard disk, USB stick or (u)SD card"]]
   
 In this document we will see step by step how to install NetBSD/evbarm on an  In this document we will see step by step how to install NetBSD/evbarm 8.0 on an
 external media (SATA hard disk, USB stick or (u)SD card) using  external media (SATA hard disk, USB stick or (u)SD card) using
 [[!template id=man name="sysinst" section="8"]].  [[!template id=man name="sysinst" section="8"]].
   
Line 37  $ gunzip armv7.img.gz Line 37  $ gunzip armv7.img.gz
 # dd if=/usr/pkg/share/u-boot/<boardname>/u-boot-sunxi-with-spl.bin of=/dev/rld0d bs=1k seek=8 conv=sync  # dd if=/usr/pkg/share/u-boot/<boardname>/u-boot-sunxi-with-spl.bin of=/dev/rld0d bs=1k seek=8 conv=sync
 """]]  """]]
   
   ## NetBSD/evbarm 8.0 (and older) u-boot adjustments
   
   [[!template id=note text="""
   Please note that the following adjustments will not be needed in
   NetBSD-current and 9.0.
   """]]
   
 NetBSD/evbarm 8.0 does not automatically boot on the BananaPI.  NetBSD/evbarm 8.0 does not automatically boot on the BananaPI.
 We can use the following commands to boot from the (u)SD cards in u-boot:  We can use the following commands to boot from the (u)SD cards in u-boot:
   
Line 546  files of the `/boot` partition of the (u Line 553  files of the `/boot` partition of the (u
 # umount /mnt  # umount /mnt
 """]]  """]]
   
   
   ## NetBSD/evbarm 8.0 u-boot adjustments to boot from hard disk
   
 Finally we can prepare a u-boot script (`boot.scr`) to load the kernel from the  Finally we can prepare a u-boot script (`boot.scr`) to load the kernel from the
 SATA hard disk and boot it:  SATA hard disk and boot it:
   
Line 567  $ mkubootimage -A arm -n armv7 -T script Line 577  $ mkubootimage -A arm -n armv7 -T script
   
 Please remember that in the early boot phase, u-boot and `boot.scr`  Please remember that in the early boot phase, u-boot and `boot.scr`
 are loaded from the (u)SD card and it loads the kernel present in  are loaded from the (u)SD card and it loads the kernel present in
 the `/boot` partition of the hard disk.  the `/boot` partition of the hard disk (in our case "wd0e").
   
   
 # References  # References

Removed from v.1.15  
changed lines
  Added in v.1.19


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb