--- wikisrc/ports/evbarm/beaglebone.mdwn	2013/01/01 05:38:48	1.1
+++ wikisrc/ports/evbarm/beaglebone.mdwn	2014/01/06 18:11:54	1.8
@@ -1,12 +1,16 @@
 [[!meta title="NetBSD/evbarm on BeagleBone"]]
 
+[[images/beaglebone.jpg]]
+
 This page attempts to document and coordinate efforts towards NetBSD on [BeagleBone](http://beagleboard.org/bone).
 
+(BeagleBone [image](http://www.flickr.com/photos/sparkfun/8267577194/) by SparkFun Electronics used under CC-By-2.0 license)
+
 # What works
  - Boots multi-user on [[!template id=man name="ld" section="4"]] @ [[!template id=man name="sdmmc" section="4"]] root and [[!template id=man name="com" section="4"]] console.
+ - Ethernet ([[!template id=man name="cpsw" section="4" arch="evbarm"]])
 
 # What needs work
- - Ethernet (being worked on by [[users/jakllsch]])
  - EDMA3 (perhaps at first for [[!template id=man name="sdhc" section="4"]])
  - USB (host)
  - SPI
@@ -60,3 +64,40 @@ WARNING: using filesystem time
 WARNING: CHECK AND RESET THE DATE!
 init: copying out path `/sbin/init' 11
 """]]
+
+
+ - Growing the root file-system
+   - During the partitioning process, do not delete or format the
+     first MSDOS (FAT) partition, as this is what your firmware by default boots from
+     (unless you have prepared a boot partition on other media).
+   - For accident-free operation of resize_ffs, the filesystem it is supposed to grow needs to be either not mounted or at least not mounted for writing.
+     To do that for a root filesystem, reboot to single user, and at the prompt to enter the pathname of shell, press
+           return for the default (/bin/sh).
+   - At the # prompt, type
+
+        "disklabel -i ld0" and press return.
+   - At the partition> prompt type "A" and press return.
+
+           Adjust disklabel sector from 4194304 to 62333952 [n]?
+           Type "y" and press return.
+   - partition> prompt type "a" and press return.
+
+           Filesystem type prompt, press return to use the current value (4.2BSD).
+           Start offset prompt, press return to use the current value.
+           Partition size prompt, type "$" and press return to grow the
+           partition to use all available free space.
+   - partition> prompt type "W" to save the changes to the disklabel.
+
+           Confirm this choice by typing "y" at the Label disk prompt.
+           Type "Q" and press return to quit disklabel.
+   - At the # prompt (shell), type
+
+           fsck -fy /dev/rld0a
+           resize_ffs -y /dev/rld0a
+   - This may take a few minutes, be patient!
+
+           fsck -fy /dev/rld0a
+           mount_msdos /dev/ld0e /boot
+           reboot
+    - When the system comes back up, the root file-system will have been expanded to
+           fill the SD card.