[BACK]Return to beaglebone.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports / evbarm

Diff for /wikisrc/ports/evbarm/beaglebone.mdwn between versions 1.3 and 1.4

version 1.3, 2013/01/07 17:45:10 version 1.4, 2013/11/20 13:53:44
Line 64  WARNING: using filesystem time Line 64  WARNING: using filesystem time
 WARNING: CHECK AND RESET THE DATE!  WARNING: CHECK AND RESET THE DATE!
 init: copying out path `/sbin/init' 11  init: copying out path `/sbin/init' 11
 """]]  """]]
   
   
    - Growing the root file-system
      - During the partitioning process, do not delete or format the
        first MSDOS (FAT) partition, as the Raspberry pi firmware is
        hard coded to boot on the SDCAD / 1st MSDOS partition / Firmware
        updates and boot loader.
      - Copy /boot/cmdline.txt to /boot/cmdline.txt.orig
      - Edit /boot/cmdline.txt and add the '-s' flag to the end of the first line of text to boot into single-user mode.
      - Reboot, and at the prompt to enter the passname of shell, press
              return for the default (/bin/sh).
      - At the # prompt, type
   
           "disklabel -i ld0" and press return.
      - At the partition> prompt type "A" and press return.
   
              Adjust disklabel sector from 4194304 to 62333952 [n]?
              Type "y" and press return.
      - partition> prompt type "a" and press return.
   
              Filesystem type prompt, press return to use the current value (4.2BSD).
              Start offset prompt, press return to use the current value.
              Partition size prompt, type "$" and press return to grow the
              partition to use all available free space.
      - partition> prompt type "W" to save the changes to the disklabel.
   
              Confirm this choice by typing "y" at the Label disk prompt.
              Type "Q" and press return to quit disklabel.
      - At the # prompt (shell), type
   
              fsck -fy /dev/rld0a
              resize_ffs -y /dev/rld0a
      - This may take a few minutes, be patient!
   
              fsck -fy /dev/rld0a
              mount_msdos /dev/ld0e /boot
              mv /boot/cmdline.txt.orig /boot/cmdline.txt
              reboot
       - When the system comes back up, the root file-system will have been expanded to
              fill the SD card.
Removed from v.1.3  
changed lines
  Added in v.1.4

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb