Diff for /wikisrc/ports/evbarm/beaglebone.mdwn between versions 1.15 and 1.18

version 1.15, 2015/11/02 10:47:00 version 1.18, 2015/12/13 01:52:44
Line 2 Line 2
   
 [[images/beaglebone.jpg]]  [[images/beaglebone.jpg]]
   
 This page attempts to document and coordinate efforts towards NetBSD on [BeagleBone](http://beagleboard.org/bone) and [BeagleBone Black](http://beagleboard.org/black).  This page attempts to document and coordinate efforts towards NetBSD on
   [BeagleBone](http://beagleboard.org/bone) and
   [BeagleBone Black](http://beagleboard.org/black).
   
 (BeagleBone [image](http://www.flickr.com/photos/sparkfun/8267577194/) by SparkFun Electronics used under CC-By-2.0 license)  (BeagleBone [image](http://www.flickr.com/photos/sparkfun/8267577194/) by
   SparkFun Electronics used under CC-By-2.0 license)
   
 [[!toc levels=2]]  [[!toc levels=2]]
   
Line 21  This page attempts to document and coord Line 24  This page attempts to document and coord
   
 # TODO  # TODO
  - SPI   - SPI
  - eMMC 8-bit mode  
  - Framebuffer/graphics with LCD or DVI/HDMI capes   - Framebuffer/graphics with LCD or DVI/HDMI capes
  - Touchscreens on LCD capes   - Touchscreens on LCD capes
  - USB (device)   - USB (device)
   
 # BeagleBone Black User LEDs  # BeagleBone Black User LEDs
   
 The four blue user LEDs on the BeagleBone Black are wired to GPIO1_21 through GPIO1_24. To control the LEDs from userland, set **gpio=YES** in rc.conf and add this to */etc/gpio.conf*:  The four blue user LEDs on the BeagleBone Black are wired to GPIO1_21 through
   GPIO1_24. To control the LEDs from userland, set **gpio=YES** in rc.conf and
   add this to */etc/gpio.conf*:
   
 [[!template  id=programlisting text="""  [[!template  id=programlisting text="""
 gpio1 21 set out USR0  gpio1 21 set out USR0
Line 37  gpio1 23 set out USR2 Line 41  gpio1 23 set out USR2
 gpio1 24 set out USR3  gpio1 24 set out USR3
 """]]  """]]
   
 After rebooting, the LED states can be controlled with [[!template id=man name="gpioctl" section="8"]].  After rebooting, the LED states can be controlled with
   [[!template id=man name="gpioctl" section="8"]].
   
 [[!template  id=programlisting text="""  [[!template  id=programlisting text="""
 # turn the USR0 light on  # turn the USR0 light on
Line 127  ld1: 4-bit width, bus clock 52.000 MHz Line 132  ld1: 4-bit width, bus clock 52.000 MHz
 boot device: ld1  boot device: ld1
 root on ld1a dumps on ld1b  root on ld1a dumps on ld1b
 """]]  """]]
   

Removed from v.1.15  
changed lines
  Added in v.1.18


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb