--- wikisrc/ports/evbarm/beaglebone.mdwn 2013/01/01 05:38:48 1.1
+++ wikisrc/ports/evbarm/beaglebone.mdwn 2015/11/02 10:43:47 1.14
@@ -1,62 +1,121 @@
-[[!meta title="NetBSD/evbarm on BeagleBone"]]
+[[!meta title="NetBSD/evbarm on BeagleBone and BeagleBone Black"]]
-This page attempts to document and coordinate efforts towards NetBSD on [BeagleBone](http://beagleboard.org/bone).
+[[images/beaglebone.jpg]]
-# What works
- - Boots multi-user on [[!template id=man name="ld" section="4"]] @ [[!template id=man name="sdmmc" section="4"]] root and [[!template id=man name="com" section="4"]] console.
+This page attempts to document and coordinate efforts towards NetBSD on [BeagleBone](http://beagleboard.org/bone) and [BeagleBone Black](http://beagleboard.org/black).
+
+(BeagleBone [image](http://www.flickr.com/photos/sparkfun/8267577194/) by SparkFun Electronics used under CC-By-2.0 license)
+
+[[!toc levels=2]]
-# What needs work
- - Ethernet (being worked on by [[users/jakllsch]])
- - EDMA3 (perhaps at first for [[!template id=man name="sdhc" section="4"]])
+# Supported hardware
+ - Boots multi-user on [[!template id=man name="ld" section="4"]] @ [[!template id=man name="sdmmc" section="4"]] root and [[!template id=man name="com" section="4"]] console.
+ - Ethernet ([[!template id=man name="cpsw" section="4" arch="evbarm"]])
+ - SD/MMC controller (SD card and eMMC)
+ - EDMA3 (for [[!template id=man name="sdhc" section="4"]])
- USB (host)
- - SPI
- I²C
- - GPIO
+ - CPU frequency scaling (various speeds between 300MHz and 1GHz)
+ - Random number generator [[!template id=man name="trng" section="4"]]
+ - GPIO (-current since Nov 1, 2015)
+
+# TODO
+ - SPI
+ - eMMC 8-bit mode
- Framebuffer/graphics with LCD or DVI/HDMI capes
- Touchscreens on LCD capes
- USB (device)
+# BeagleBone Black User LEDs
+
+The four blue user LEDs on the BeagleBone Black are wired to GPIO1_21 through GPIO1_24. To control the LEDs from userland, set **gpio=YES** in rc.conf and add this to */etc/gpio.conf*:
+
+[[!template id=programlisting text="""
+gpio1 21 set out USR0
+gpio1 22 set out USR1
+gpio1 23 set out USR2
+gpio1 24 set out USR3
+"""]]
+
+After rebooting, the LED states can be controlled with [[!template id=man name="gpioctl" section="8"]].
+
+[[!template id=programlisting text="""
+# turn the USR0 light on
+gpioctl gpio1 USR0 on
+
+# turn the USR0 light off
+gpioctl gpio1 USR0 off
+
+# toggle the USR0 light state
+gpioctl gpio1 USR0 toggle
+"""]]
+
+
# Sample dmesg
[[!template id=filecontent name="dmesg" text="""
-NetBSD 6.99.16 (BEAGLEBONE)
-total memory = 256 MB
-avail memory = 247 MB
+NetBSD 7.99.9 (BEAGLEBONE) #2: Tue Apr 14 20:24:09 ADT 2015
+ Jared@Jared-PC:/cygdrive/d/netbsd/src/sys/arch/evbarm/compile/obj/BEAGLEBONE
+total memory = 512 MB
+avail memory = 503 MB
+sysctl_createv: sysctl_create(machine_arch) returned 17
timecounter: Timecounters tick every 10.000 msec
-cprng kernel: WARNING insufficient entropy at creation.
mainbus0 (root)
-cpu0 at mainbus0 core 0: 720 MHz Cortex-A8 r3p2 (Cortex core)
+cpu0 at mainbus0 core 0: 550 MHz Cortex-A8 r3p2 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232031 [3]=0x11112131, [4]=0x11142, [5]=0
cpu0: mmfr: [0]=0x1100003 [1]=0x20000000 [2]=0x1202000 [3]=0x211
cpu0: pfr: [0]=0x1131 [1]=0x11
-cpu0: 32KB/64B 4-way L1 Instruction cache
-cpu0: 32KB/64B 4-way write-back-locking-C L1 Data cache
-cpu0: 256KB/64B 8-way write-through L2 Unified cache
-vfp0 at cpu0: NEON MPE (VFP 3.0+)
+cpu0: 32KB/64B 4-way L1 VIPT Instruction cache
+cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
+cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
+vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
+vfp0: mvfr: [0]=0x11110222 [1]=0x11111
obio0 at mainbus0 base 0x44000000-0x4fffffff: On-Board IO
omapicu0 at obio0 addr 0x48200000-0x48200fff intrbase 0
prcm0 at obio0 addr 0x44e00000-0x44e01fff: Power, Reset and Clock Management
-gpmc0 at mainbus0 base 0x50000000-0x50ffffff: General Purpose Memory Controller, rev 6.0
+sitaracm0 at obio0 addr 0x44e10000-0x44e11fff: control module, rev 1.0
+edma0 at obio0 addr 0x49000000-0x490fffff intrbase 12
+gpmc0 at mainbus0 base 0x50000000: General Purpose Memory Controller, rev 6.0
gpmc0: CS#0 valid, addr 0x08000000, size 256MB
com0 at obio0 addr 0x44e09000-0x44e09fff intr 72: ns16550a, working fifo
com0: console
-sdhc0 at obio0 addr 0x48060100-0x48060fff intr 64: SDHC controller
+sdhc0 at obio0 addr 0x48060100-0x48060fff intr 64: SDHC controller (EDMA)
sdhc0: SD Host Specification 2.0, rev.49
+sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
+sdhc1 at obio0 addr 0x481d8100-0x481d8fff intr 28: SDHC controller (EDMA)
+sdhc1: SD Host Specification 2.0, rev.49
+sdhc1: using DMA transfer
+sdmmc1 at sdhc1 slot 0
+tiiic0 at obio0 addr 0x44e0b000-0x44e0bfff intr 70: rev 0.11
+iic0 at tiiic0: I2C bus
+seeprom0 at iic0 addr 0x50: AT24Cxx or compatible EEPROM: size 32768
+tps65217pmic0 at iic0 addr 0x24: TPS65217C Power Management Multi-Channel IC (rev 1.2)
+tps65217pmic0: power sources USB max 1300 mA, [AC] max 2500 mA
+tps65217pmic0: [LDO1: 1800 mV] [LDO2: 3300 mV] [LDO3: 1800 mV] [LDO4: 3300 mV] [DCDC1: 1500 mV] [DCDC2: 1325 mV] [DCDC3: 1100 mV]
omapdmtimer0 at obio0 addr 0x48040000-0x48040fff intr 68: DMTIMER2
omapdmtimer1 at obio0 addr 0x44e31000-0x44e31fff intr 67: DMTIMER1ms
omapdmtimer2 at obio0 addr 0x48044000-0x48044fff intr 92: DMTIMER4
omapwdt32k0 at obio0 addr 0x44e35000-0x44e35fff: rev 0.1
+tiotg0 at obio0 addr 0x47400000-0x47404fff intrbase 17: TI dual-port USB controller: version v1.0.0.13
+motg0 at tiotg0 port 0: 0x4ea20800 version v0.0.0
+motg1 at tiotg0 port 1: 0x4ea20800 version v0.0.0
+motg1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
+usb0 at motg1: USB revision 2.0
+cpsw0 at obio0 addr 0x4a100000-0x4a107fff intrbase 40: TI CPSW Ethernet
+cpsw0: Ethernet address 90:59:af:5c:d0:94
+ukphy0 at cpsw0 phy 0: OUI 0x00800f, model 0x000f, rev. 1
+ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "dmtimer" frequency 24000000 Hz quality 100
-ld0 at sdmmc0: <0x28:0x4245:31676:0x10::0x0a7>
-ld0: 490 MB, 995 cyl, 16 head, 63 sec, 512 bytes/sect x 1003520 sectors
-ld0: 4-bit width, bus clock 50.000 MHz
-cprng sysctl: WARNING insufficient entropy at creation.
-boot device:
-root on ld0f dumps on ld0b
-WARNING: no TOD clock present
-WARNING: using filesystem time
-WARNING: CHECK AND RESET THE DATE!
-init: copying out path `/sbin/init' 11
+uhub0 at usb0: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
+uhub0: 1 port with 1 removable, self powered
+sdmmc0: couldn't enable card: 60
+ld1 at sdmmc1: <0xfe:0x014e:MMC02G:0x00:0x1aee3308:0x000>
+ld1: 1832 MB, 930 cyl, 64 head, 63 sec, 512 bytes/sect x 3751936 sectors
+ld1: 4-bit width, bus clock 52.000 MHz
+boot device: ld1
+root on ld1a dumps on ld1b
+root file system type: ffs
+kern.module.path=/stand/evbarm/7.99.9/modules
"""]]